From: Rodrigo Vivi <rodrigo.vivi@intel.com>
To: "José Roberto de Souza" <jose.souza@intel.com>
Cc: intel-gfx@lists.freedesktop.org,
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Subject: Re: [PATCH 6/6] drm/i915/psr: Enable aux frame sync in source
Date: Thu, 15 Mar 2018 17:31:28 -0700 [thread overview]
Message-ID: <20180316003128.GQ3945@intel.com> (raw)
In-Reply-To: <20180314223617.20122-6-jose.souza@intel.com>
On Wed, Mar 14, 2018 at 03:36:17PM -0700, José Roberto de Souza wrote:
> Even with GTC not enabled lets send the aux frame sync.
> Hardware is going to send dummy values but this way we can get rid of
> this workarround in PSR exit: 'drm/i915/psr: disable aux_frame_sync
> on psr2 exit'.
> Also moving the line disabling aux frame sync in sink to after report
> that PSR2 has exit to avoid.
>
> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
> Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 1 +
> drivers/gpu/drm/i915/intel_psr.c | 15 ++++++---------
> 2 files changed, 7 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index e9fc1722c0fb..5a2364656aa5 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4132,6 +4132,7 @@ enum {
> #define EDP_PSR2_CTL _MMIO(0x6f900)
> #define EDP_PSR2_ENABLE (1<<31)
> #define EDP_SU_TRACK_ENABLE (1<<30)
> +#define EDP_AUX_FRAME_SYNC_ENABLE (1<<27)
This shows reserved here for me. I believe we should just drop this patch.
> #define EDP_Y_COORDINATE_VALID (1<<26)
> #define EDP_Y_COORDINATE_ENABLE (1<<25)
> #define EDP_MAX_SU_DISABLE_TIME(t) ((t)<<20)
> diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
> index d622e37894d4..7aab66b5bc91 100644
> --- a/drivers/gpu/drm/i915/intel_psr.c
> +++ b/drivers/gpu/drm/i915/intel_psr.c
> @@ -418,6 +418,7 @@ static void hsw_activate_psr2(struct intel_dp *intel_dp)
> * good enough. */
> val |= EDP_PSR2_ENABLE | EDP_SU_TRACK_ENABLE;
> val |= EDP_Y_COORDINATE_VALID | EDP_Y_COORDINATE_ENABLE;
> + val |= EDP_AUX_FRAME_SYNC_ENABLE;
>
> if (drm_dp_dpcd_readb(&intel_dp->aux,
> DP_SYNCHRONIZATION_LATENCY_IN_SINK,
> @@ -715,11 +716,6 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
> i915_reg_t psr_status;
> u32 psr_status_mask;
>
> - if (dev_priv->psr.psr2_enabled)
> - drm_dp_dpcd_writeb(&intel_dp->aux,
> - DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
> - 0);
> -
> if (dev_priv->psr.psr2_enabled) {
> psr_status = EDP_PSR2_STATUS;
> psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
> @@ -742,6 +738,11 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
> 2000))
> DRM_ERROR("Timed out waiting for PSR Idle State\n");
>
> + if (dev_priv->psr.psr2_enabled)
> + drm_dp_dpcd_writeb(&intel_dp->aux,
> + DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
> + 0);
> +
> dev_priv->psr.active = false;
> } else {
> if (dev_priv->psr.psr2_enabled)
> @@ -863,10 +864,6 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
> return;
>
> if (HAS_DDI(dev_priv)) {
> - if (dev_priv->psr.psr2_enabled)
> - drm_dp_dpcd_writeb(&intel_dp->aux,
> - DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
> - 0);
> if (dev_priv->psr.psr2_enabled) {
> val = I915_READ(EDP_PSR2_CTL);
> WARN_ON(!(val & EDP_PSR2_ENABLE));
> --
> 2.16.2
>
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2018-03-16 0:31 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-14 22:36 [PATCH 1/6] drm/i915/psr: Nuke aux_frame_sync José Roberto de Souza
2018-03-14 22:36 ` [PATCH 2/6] drm/i915/psr: Tie PSR2 support to Y coordinate requirement in intel_psr_init_dpcd() José Roberto de Souza
2018-03-16 0:35 ` Rodrigo Vivi
2018-03-16 1:04 ` Souza, Jose
2018-03-16 1:16 ` Rodrigo Vivi
2018-03-14 22:36 ` [PATCH 3/6] drm/i915/psr: Enable Y-coordinate support in source José Roberto de Souza
2018-03-16 0:28 ` Rodrigo Vivi
2018-03-16 1:29 ` Pandiyan, Dhinakaran
2018-03-14 22:36 ` [PATCH 4/6] drm/i915/psr: Do not override PSR2 sink support José Roberto de Souza
2018-03-14 22:36 ` [PATCH 5/6] drm/i915/psr: Rename intel_crtc_state has_psr to can_psr José Roberto de Souza
2018-03-16 2:09 ` Pandiyan, Dhinakaran
2018-03-16 22:22 ` Souza, Jose
2018-03-14 22:36 ` [PATCH 6/6] drm/i915/psr: Enable aux frame sync in source José Roberto de Souza
2018-03-16 0:31 ` Rodrigo Vivi [this message]
2018-03-16 1:34 ` Pandiyan, Dhinakaran
2018-03-14 23:10 ` ✗ Fi.CI.BAT: failure for series starting with [1/6] drm/i915/psr: Nuke aux_frame_sync Patchwork
2018-03-16 0:29 ` [PATCH 1/6] " Rodrigo Vivi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180316003128.GQ3945@intel.com \
--to=rodrigo.vivi@intel.com \
--cc=dhinakaran.pandiyan@intel.com \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jose.souza@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.