From: Pavel Machek <pavel@ucw.cz>
To: Sebastian Reichel <sre@kernel.org>
Cc: Dan Williams <dcbw@redhat.com>, Tony Lindgren <tony@atomide.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Marcel Partap <mpartap@gmx.net>,
Michael Scott <michael.scott@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Subject: Re: [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
Date: Fri, 23 Mar 2018 21:13:43 +0100 [thread overview]
Message-ID: <20180323201343.GC23658@amd> (raw)
In-Reply-To: <20180323113521.45va72bhzis6ym6m@earth.universe>
[-- Attachment #1: Type: text/plain, Size: 3417 bytes --]
On Fri 2018-03-23 12:35:21, Sebastian Reichel wrote:
> Hi,
>
> On Fri, Mar 23, 2018 at 11:54:55AM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > > > Do you have the related dts patches picked from next?
> > > > >
> > > > > fdd192037fce ("ARM: dts: omap4-droid4: Fix USB PHY port naming")
> > > > > e5b9fd7bdeb5 ("ARM: dts: omap4-droid4: Configure MDM6600 USB PHY")
> > > > >
> > > > > But yeah all you need to do is have phy-mapphone-mdm6600 and
> > > > > ohci-platform loaded and then ifconfig should show four wwan
> > > > > interfaces being added.
> > > >
> > > > ifconfig? I thought I should get /dev/ttyUSB0..3?
> > >
> > > I believe they are QMI via qmi_wwan, not TTYs.
> >
> > Well, qmicli expects device path... and I see nothing on ifconfig. Any
> > idea how the device would be named?
> >
> > But I believe it just does not work, see the qcserial experiment with
> > new_id below.
>
> Dan is right, you need qmi_wwan driver. qmicli expects
> /dev/cdc-wdm<num> device. I use this on Droid 4:
>
> qmicli -d /dev/cdc-wdm0 --some-other-option
Aha, there's ./drivers/usb/serial/usb_wwan.c and there's
./drivers/net/usb/qmi_wwan.o . That confused me.
qmicli now works for me, thanks!
Tested-by: Pavel Machek <pavel@ucw.cz>
Does ofonod work for you? I could not get that one to work...
ofonod[4083]: plugins/udevng.c:create_modem()
/sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb2/2-1
ofonod[4083]: plugins/udevng.c:create_modem() driver=gobi
ofonod[4083]: src/modem.c:ofono_modem_create() name: (null), type:
gobi
ofonod[4083]: plugins/udevng.c:setup_gobi()
/sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb2/2-1
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm0 255/251/255
05 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan0 255/251/255 05
(null) (null) net
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm1 255/251/255
06 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan1 255/251/255 06
(null) (null) net
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm2 255/251/255
07 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan2 255/251/255 07
(null) (null) net
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm3 255/251/255
08 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan3 255/251/255 08
(null) (null) net
ofonod[4083]: plugins/udevng.c:destroy_modem()
/sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb2/2-1
ofonod[4083]: src/modem.c:ofono_modem_remove() 0x5eb380
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm0
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan0
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm1
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan1
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm2
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan2
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm3
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan3
ofonod[4083]: plugins/upower.c:upower_connect() upower connect
ofonod[4083]: plugins/hfp_hf_bluez5.c:connect_handler() Registering
External Profile handler ...
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Pavel Machek <pavel@ucw.cz>
To: Sebastian Reichel <sre@kernel.org>
Cc: Dan Williams <dcbw@redhat.com>, Tony Lindgren <tony@atomide.com>,
Kishon Vijay Abraham I <kishon@ti.com>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
Mark Rutland <mark.rutland@arm.com>,
Marcel Partap <mpartap@gmx.net>,
Michael Scott <michael.scott@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Subject: [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
Date: Fri, 23 Mar 2018 21:13:43 +0100 [thread overview]
Message-ID: <20180323201343.GC23658@amd> (raw)
On Fri 2018-03-23 12:35:21, Sebastian Reichel wrote:
> Hi,
>
> On Fri, Mar 23, 2018 at 11:54:55AM +0100, Pavel Machek wrote:
> > Hi!
> >
> > > > > Do you have the related dts patches picked from next?
> > > > >
> > > > > fdd192037fce ("ARM: dts: omap4-droid4: Fix USB PHY port naming")
> > > > > e5b9fd7bdeb5 ("ARM: dts: omap4-droid4: Configure MDM6600 USB PHY")
> > > > >
> > > > > But yeah all you need to do is have phy-mapphone-mdm6600 and
> > > > > ohci-platform loaded and then ifconfig should show four wwan
> > > > > interfaces being added.
> > > >
> > > > ifconfig? I thought I should get /dev/ttyUSB0..3?
> > >
> > > I believe they are QMI via qmi_wwan, not TTYs.
> >
> > Well, qmicli expects device path... and I see nothing on ifconfig. Any
> > idea how the device would be named?
> >
> > But I believe it just does not work, see the qcserial experiment with
> > new_id below.
>
> Dan is right, you need qmi_wwan driver. qmicli expects
> /dev/cdc-wdm<num> device. I use this on Droid 4:
>
> qmicli -d /dev/cdc-wdm0 --some-other-option
Aha, there's ./drivers/usb/serial/usb_wwan.c and there's
./drivers/net/usb/qmi_wwan.o . That confused me.
qmicli now works for me, thanks!
Tested-by: Pavel Machek <pavel@ucw.cz>
Does ofonod work for you? I could not get that one to work...
ofonod[4083]: plugins/udevng.c:create_modem()
/sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb2/2-1
ofonod[4083]: plugins/udevng.c:create_modem() driver=gobi
ofonod[4083]: src/modem.c:ofono_modem_create() name: (null), type:
gobi
ofonod[4083]: plugins/udevng.c:setup_gobi()
/sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb2/2-1
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm0 255/251/255
05 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan0 255/251/255 05
(null) (null) net
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm1 255/251/255
06 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan1 255/251/255 06
(null) (null) net
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm2 255/251/255
07 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan2 255/251/255 07
(null) (null) net
ofonod[4083]: plugins/udevng.c:setup_gobi() /dev/cdc-wdm3 255/251/255
08 (null) (null) usbmisc
ofonod[4083]: plugins/udevng.c:setup_gobi() wwan3 255/251/255 08
(null) (null) net
ofonod[4083]: plugins/udevng.c:destroy_modem()
/sys/devices/platform/44000000.ocp/4a064000.usbhshost/4a064800.ohci/usb2/2-1
ofonod[4083]: src/modem.c:ofono_modem_remove() 0x5eb380
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm0
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan0
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm1
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan1
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm2
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan2
ofonod[4083]: plugins/udevng.c:destroy_modem() /dev/cdc-wdm3
ofonod[4083]: plugins/udevng.c:destroy_modem() wwan3
ofonod[4083]: plugins/upower.c:upower_connect() upower connect
ofonod[4083]: plugins/hfp_hf_bluez5.c:connect_handler() Registering
External Profile handler ...
Pavel
next prev parent reply other threads:[~2018-03-23 20:13 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 2:37 [PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4 Tony Lindgren
2018-03-09 2:37 ` Tony Lindgren
2018-03-09 9:44 ` Pavel Machek
2018-03-09 9:44 ` Pavel Machek
2018-03-09 14:52 ` Tony Lindgren
2018-03-09 14:52 ` Tony Lindgren
2018-03-22 13:55 ` Pavel Machek
2018-03-22 13:55 ` Pavel Machek
2018-03-22 16:46 ` Tony Lindgren
2018-03-22 16:46 ` Tony Lindgren
2018-03-22 19:28 ` Pavel Machek
2018-03-22 19:28 ` Pavel Machek
2018-03-22 22:23 ` Dan Williams
2018-03-22 22:23 ` Dan Williams
2018-03-23 10:54 ` Pavel Machek
2018-03-23 10:54 ` Pavel Machek
2018-03-23 11:35 ` Sebastian Reichel
2018-03-23 11:35 ` Sebastian Reichel
2018-03-23 20:13 ` Pavel Machek [this message]
2018-03-23 20:13 ` Pavel Machek
2018-03-24 13:59 ` Dan Williams
2018-03-24 13:59 ` Dan Williams
2018-03-24 14:25 ` Tony Lindgren
2018-03-24 14:25 ` Tony Lindgren
2018-03-24 20:02 ` Pavel Machek
2018-03-24 20:02 ` Pavel Machek
2018-03-25 15:45 ` Tony Lindgren
2018-03-25 15:45 ` Tony Lindgren
2018-03-25 18:58 ` Pavel Machek
2018-03-25 18:58 ` Pavel Machek
2018-03-25 20:52 ` Tony Lindgren
2018-03-25 20:52 ` Tony Lindgren
2018-03-25 22:55 ` Pavel Machek
2018-03-25 22:55 ` Pavel Machek
2018-03-26 0:22 ` Tony Lindgren
2018-03-26 0:22 ` Tony Lindgren
2018-03-26 0:30 ` Tony Lindgren
2018-03-26 0:30 ` Tony Lindgren
2018-03-26 15:16 ` Dan Williams
2018-03-26 15:16 ` Dan Williams
2018-03-27 0:45 ` Tony Lindgren
2018-03-27 0:45 ` Tony Lindgren
2018-03-29 19:44 ` Pavel Machek
2018-03-29 19:44 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180323201343.GC23658@amd \
--to=pavel@ucw.cz \
--cc=dcbw@redhat.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=michael.scott@linaro.org \
--cc=mpartap@gmx.net \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.