From: Seebs <seebs@seebs.net>
To: Andre McCurdy <armccurdy@gmail.com>
Cc: OE-core <openembedded-core@lists.openembedded.org>
Subject: Re: pseudo: host user contamination
Date: Tue, 27 Mar 2018 15:20:26 -0500 [thread overview]
Message-ID: <20180327152026.335b4c2d@seebsdell> (raw)
In-Reply-To: <CAJ86T=V=b2jsSuVEicQbbgrax+8iV7HV0B=cKWDaejLq-Dh2eQ@mail.gmail.com>
On Tue, 27 Mar 2018 13:12:19 -0700
Andre McCurdy <armccurdy@gmail.com> wrote:
> If you mean forwarding arguments through a wrapper without
> interpreting them then I don't know what your concern is. Forwarding
> arguments can be handled completely generically - for any architecture
> and any syscall. See the musl implementation.
My concern is that, strictly speaking, this is nearly all undefined
behavior, and that reading more arguments than you were passed *does*
explode on some C implementations. Possibly none of the ones musl is
targeting.
I'm trying to minimize assumptions that *could in principle* affect
portability, such as "it's safe to grab an arbitrary pool of arguments
with va_arg", or "it's safe to grab arguments with va_arg using
different parameter types than were used to store them". Because
assumptions like those periodically break when, for some inexplicable
reason, someone ports to an architecture that isn't a VAX 11/780.
We're already stuck with "duplicating library functions" as a risk.
But so far, I don't think I have any code which is manipulating
arguments in a way that violates the spec. Adding such code creates
an additional risk, however small that risk may be in practice right
now.
> However the good news is that code in a syscall() wrapper doesn't need
> to be any *more* aware of argument ordering than the C code calling
> syscall(). In this particular case, if the code in gnulib calling
> syscall(SYS_renameat2, ...) doesn't do anything architecture specific
> then either it's not needed (and therefore also not needed in a
> syscall() wrapper which wants interpret renameat2 syscalls) or there's
> a portability bug in gnulib. ie there is no case where architecture
> specific awareness is required in a syscall() wrapper but not in the
> original C code which calls syscall().
Yes.
Right now, I think my inclination is to make a renameat2() wrapper
which fails. We did that for renameat() originally, and it was years
before it actually came up, and I think it's premature to attempt the
wrapper at a time when I *can't* write test code which compares it to
the behavior of libc.
-s
next prev parent reply other threads:[~2018-03-27 20:20 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-23 15:33 pseudo: host user contamination Enrico Scholz
2018-03-23 15:43 ` Enrico Scholz
2018-03-23 16:05 ` Burton, Ross
2018-03-23 16:10 ` Enrico Scholz
2018-03-23 16:17 ` Burton, Ross
2018-03-23 16:28 ` Seebs
2018-03-23 16:30 ` Burton, Ross
2018-03-23 16:49 ` Seebs
2018-03-23 16:56 ` Burton, Ross
2018-03-23 17:23 ` Seebs
2018-03-23 23:47 ` Richard Purdie
2018-03-23 23:56 ` Seebs
2018-03-24 0:22 ` Enrico Scholz
2018-03-24 0:33 ` Andre McCurdy
2018-03-24 0:36 ` Seebs
2018-03-24 1:10 ` Andre McCurdy
2018-03-24 1:17 ` Seebs
2018-03-24 1:43 ` Andre McCurdy
2018-03-24 2:44 ` Seebs
2018-03-24 12:36 ` Richard Purdie
2018-03-24 15:12 ` Seebs
2018-03-24 17:10 ` Burton, Ross
2018-03-24 17:23 ` Seebs
2018-03-24 18:12 ` Andre McCurdy
2018-03-24 18:22 ` Seebs
2018-03-24 18:59 ` Andre McCurdy
2018-03-24 19:24 ` Seebs
2018-03-24 19:42 ` Andre McCurdy
2018-03-24 19:50 ` Seebs
2018-03-24 20:12 ` Victor Kamensky
2018-03-24 23:04 ` Burton, Ross
2018-03-25 0:09 ` Victor Kamensky
2018-03-25 2:43 ` Andre McCurdy
2018-03-25 5:37 ` Victor Kamensky
2018-03-25 7:05 ` Andre McCurdy
2018-03-26 18:49 ` Andreas Müller
2018-03-26 19:31 ` Seebs
2018-03-26 20:12 ` Andre McCurdy
2018-03-26 21:07 ` Seebs
2018-03-27 1:10 ` Andre McCurdy
2018-03-27 1:32 ` Seebs
2018-03-27 1:34 ` Andre McCurdy
2018-03-27 2:07 ` Seebs
2018-03-27 2:59 ` Andre McCurdy
2018-03-27 4:41 ` Seebs
2018-03-27 19:11 ` Andre McCurdy
2018-03-27 19:22 ` Seebs
2018-03-27 20:12 ` Andre McCurdy
2018-03-27 20:20 ` Seebs [this message]
2018-03-27 20:52 ` Andre McCurdy
2018-03-27 21:10 ` Seebs
2018-03-29 12:04 ` Enrico Scholz
2018-03-29 14:06 ` Seebs
2018-03-27 13:06 ` Enrico Scholz
2018-03-27 15:50 ` Seebs
2018-03-27 16:26 ` Enrico Scholz
2018-03-27 16:46 ` Seebs
2018-03-24 20:22 ` Joshua Watt
2018-03-24 21:01 ` Seebs
2018-03-24 20:27 ` Andre McCurdy
2018-03-27 14:42 ` Enrico Scholz
2018-03-27 15:55 ` Seebs
2018-03-27 16:35 ` Enrico Scholz
2018-03-27 16:40 ` Seebs
2018-03-27 19:20 ` Enrico Scholz
2018-03-27 19:24 ` Seebs
2018-03-27 20:06 ` Enrico Scholz
2018-03-23 16:06 ` Burton, Ross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180327152026.335b4c2d@seebsdell \
--to=seebs@seebs.net \
--cc=armccurdy@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.