From: Daniel Mack <daniel@zonque.org>
To: linux-wireless@vger.kernel.org
Cc: wcn36xx@lists.infradead.org, kvalo@codeaurora.org,
loic.poulain@linaro.org, rfried@codeaurora.org,
bjorn.andersson@linaro.org, Daniel Mack <daniel@zonque.org>
Subject: [PATCH 2/3] wcn36xx: don't keep reference to skb if transmission failed
Date: Tue, 3 Apr 2018 18:51:53 +0200 [thread overview]
Message-ID: <20180403165154.18775-2-daniel@zonque.org> (raw)
In-Reply-To: <20180403165154.18775-1-daniel@zonque.org>
When wcn36xx_dxe_tx_frame() fails to transmit the TX frame, the driver
will call into ieee80211_free_txskb() for the skb in flight, so it'll no
longer be valid. Hence, we shouldn't keep a reference to it in ctl->skb.
Also, if the skb has IEEE80211_TX_CTL_REQ_TX_STATUS set, a pointer to
it will currently remain in wcn->tx_ack_skb, which will potentially lead
to a crash if accessed later.
Fix this by checking the return value of wcn36xx_dxe_tx_frame(), and
nullify wcn->tx_ack_skb again in case of errors. Move the assignment
of ctl->skb in wcn36xx_dxe_tx_frame() so it only happens when the
transmission is successful.
Signed-off-by: Daniel Mack <daniel@zonque.org>
---
drivers/net/wireless/ath/wcn36xx/dxe.c | 6 +++---
drivers/net/wireless/ath/wcn36xx/txrx.c | 15 ++++++++++++++-
2 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/wcn36xx/dxe.c b/drivers/net/wireless/ath/wcn36xx/dxe.c
index e8ad8f989ccd..abf7b051e1ff 100644
--- a/drivers/net/wireless/ath/wcn36xx/dxe.c
+++ b/drivers/net/wireless/ath/wcn36xx/dxe.c
@@ -695,7 +695,6 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
/* Set source address of the SKB we send */
ctl = ctl->next;
- ctl->skb = skb;
desc = ctl->desc;
if (ctl->bd_cpu_addr) {
wcn36xx_err("bd_cpu_addr cannot be NULL for skb DXE\n");
@@ -704,8 +703,8 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
}
desc->src_addr_l = dma_map_single(wcn->dev,
- ctl->skb->data,
- ctl->skb->len,
+ skb->data,
+ skb->len,
DMA_TO_DEVICE);
if (dma_mapping_error(wcn->dev, desc->src_addr_l)) {
dev_err(wcn->dev, "unable to DMA map src_addr_l\n");
@@ -713,6 +712,7 @@ int wcn36xx_dxe_tx_frame(struct wcn36xx *wcn,
goto unlock;
}
+ ctl->skb = skb;
desc->dst_addr_l = ch->dxe_wq;
desc->fr_len = ctl->skb->len;
diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index b1768ed6b0be..a6902371e89c 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -273,6 +273,7 @@ int wcn36xx_start_tx(struct wcn36xx *wcn,
bool bcast = is_broadcast_ether_addr(hdr->addr1) ||
is_multicast_ether_addr(hdr->addr1);
struct wcn36xx_tx_bd bd;
+ int ret;
memset(&bd, 0, sizeof(bd));
@@ -317,5 +318,17 @@ int wcn36xx_start_tx(struct wcn36xx *wcn,
buff_to_be((u32 *)&bd, sizeof(bd)/sizeof(u32));
bd.tx_bd_sign = 0xbdbdbdbd;
- return wcn36xx_dxe_tx_frame(wcn, vif_priv, &bd, skb, is_low);
+ ret = wcn36xx_dxe_tx_frame(wcn, vif_priv, &bd, skb, is_low);
+ if (ret && bd.tx_comp) {
+ /* If the skb has not been transmitted,
+ * don't keep a reference to it.
+ */
+ spin_lock_irqsave(&wcn->dxe_lock, flags);
+ wcn->tx_ack_skb = NULL;
+ spin_unlock_irqrestore(&wcn->dxe_lock, flags);
+
+ ieee80211_wake_queues(wcn->hw);
+ }
+
+ return ret;
}
--
2.14.3
next prev parent reply other threads:[~2018-04-03 16:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-03 16:51 [PATCH 1/3] wcn36xx: check for DMA mapping errors in wcn36xx_dxe_tx_frame() Daniel Mack
2018-04-03 16:51 ` Daniel Mack [this message]
2018-04-03 16:51 ` [PATCH 3/3] wcn36xx: don't delete invalid bss indices Daniel Mack
2018-04-04 5:40 ` Ramon Fried
2018-04-04 6:39 ` Daniel Mack
2018-04-04 5:37 ` [PATCH 1/3] wcn36xx: check for DMA mapping errors in wcn36xx_dxe_tx_frame() Ramon Fried
2018-04-10 14:38 ` [1/3] " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180403165154.18775-2-daniel@zonque.org \
--to=daniel@zonque.org \
--cc=bjorn.andersson@linaro.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=loic.poulain@linaro.org \
--cc=rfried@codeaurora.org \
--cc=wcn36xx@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.