From: "Nikita V. Shirokov" <tehnerd@tehnerd.com>
To: Alexei Starovoitov <ast@kernel.org>,
Daniel Borkmann <daniel@iogearbox.net>
Cc: netdev@vger.kernel.org, "Nikita V. Shirokov" <tehnerd@tehnerd.com>
Subject: [PATCH bpf-next v3 10/11] bpf: adding tests for bpf_xdp_adjust_tail
Date: Tue, 17 Apr 2018 21:42:22 -0700 [thread overview]
Message-ID: <20180418044223.17685-11-tehnerd@tehnerd.com> (raw)
In-Reply-To: <20180418044223.17685-1-tehnerd@tehnerd.com>
adding selftests for bpf_xdp_adjust_tail helper. in this synthetic test
we are testing that 1) if data_end < data helper will return EINVAL
2) for normal use case packet's length would be reduced.
Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
---
tools/include/uapi/linux/bpf.h | 10 +++++++-
tools/testing/selftests/bpf/Makefile | 2 +-
tools/testing/selftests/bpf/bpf_helpers.h | 3 +++
tools/testing/selftests/bpf/test_adjust_tail.c | 30 ++++++++++++++++++++++++
tools/testing/selftests/bpf/test_progs.c | 32 ++++++++++++++++++++++++++
5 files changed, 75 insertions(+), 2 deletions(-)
create mode 100644 tools/testing/selftests/bpf/test_adjust_tail.c
diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h
index 9d07465023a2..56bf493ba7ed 100644
--- a/tools/include/uapi/linux/bpf.h
+++ b/tools/include/uapi/linux/bpf.h
@@ -755,6 +755,13 @@ union bpf_attr {
* @addr: pointer to struct sockaddr to bind socket to
* @addr_len: length of sockaddr structure
* Return: 0 on success or negative error code
+ *
+ * int bpf_xdp_adjust_tail(xdp_md, delta)
+ * Adjust the xdp_md.data_end by delta. Only shrinking of packet's
+ * size is supported.
+ * @xdp_md: pointer to xdp_md
+ * @delta: A negative integer to be added to xdp_md.data_end
+ * Return: 0 on success or negative on error
*/
#define __BPF_FUNC_MAPPER(FN) \
FN(unspec), \
@@ -821,7 +828,8 @@ union bpf_attr {
FN(msg_apply_bytes), \
FN(msg_cork_bytes), \
FN(msg_pull_data), \
- FN(bind),
+ FN(bind), \
+ FN(xdp_adjust_tail),
/* integer value in 'imm' field of BPF_CALL instruction selects which helper
* function eBPF program intends to call
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index 0a315ddabbf4..3e819dc70bee 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -31,7 +31,7 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test
sockmap_verdict_prog.o dev_cgroup.o sample_ret0.o test_tracepoint.o \
test_l4lb_noinline.o test_xdp_noinline.o test_stacktrace_map.o \
sample_map_ret0.o test_tcpbpf_kern.o test_stacktrace_build_id.o \
- sockmap_tcp_msg_prog.o connect4_prog.o connect6_prog.o
+ sockmap_tcp_msg_prog.o connect4_prog.o connect6_prog.o test_adjust_tail.o
# Order correspond to 'make run_tests' order
TEST_PROGS := test_kmod.sh \
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index d8223d99f96d..50c607014b22 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -96,6 +96,9 @@ static int (*bpf_msg_pull_data)(void *ctx, int start, int end, int flags) =
(void *) BPF_FUNC_msg_pull_data;
static int (*bpf_bind)(void *ctx, void *addr, int addr_len) =
(void *) BPF_FUNC_bind;
+static int (*bpf_xdp_adjust_tail)(void *ctx, int offset) =
+ (void *) BPF_FUNC_xdp_adjust_tail;
+
/* llvm builtin functions that eBPF C program may use to
* emit BPF_LD_ABS and BPF_LD_IND instructions
diff --git a/tools/testing/selftests/bpf/test_adjust_tail.c b/tools/testing/selftests/bpf/test_adjust_tail.c
new file mode 100644
index 000000000000..4cd5e860c903
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_adjust_tail.c
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Copyright (c) 2018 Facebook
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#include <linux/bpf.h>
+#include <linux/if_ether.h>
+#include "bpf_helpers.h"
+
+int _version SEC("version") = 1;
+
+SEC("xdp_adjust_tail")
+int _xdp_adjust_tail(struct xdp_md *xdp)
+{
+ void *data_end = (void *)(long)xdp->data_end;
+ void *data = (void *)(long)xdp->data;
+ int offset = 0;
+
+ if (data_end - data == 54)
+ offset = 256;
+ else
+ offset = 20;
+ if (bpf_xdp_adjust_tail(xdp, 0 - offset))
+ return XDP_DROP;
+ return XDP_TX;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index faadbe233966..eedda98d7bb1 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -166,6 +166,37 @@ static void test_xdp(void)
bpf_object__close(obj);
}
+static void test_xdp_adjust_tail(void)
+{
+ const char *file = "./test_adjust_tail.o";
+ struct bpf_object *obj;
+ char buf[128];
+ __u32 duration, retval, size;
+ int err, prog_fd;
+
+ err = bpf_prog_load(file, BPF_PROG_TYPE_XDP, &obj, &prog_fd);
+ if (err) {
+ error_cnt++;
+ return;
+ }
+
+ err = bpf_prog_test_run(prog_fd, 1, &pkt_v4, sizeof(pkt_v4),
+ buf, &size, &retval, &duration);
+
+ CHECK(err || errno || retval != XDP_DROP,
+ "ipv4", "err %d errno %d retval %d size %d\n",
+ err, errno, retval, size);
+
+ err = bpf_prog_test_run(prog_fd, 1, &pkt_v6, sizeof(pkt_v6),
+ buf, &size, &retval, &duration);
+ CHECK(err || errno || retval != XDP_TX || size != 54,
+ "ipv6", "err %d errno %d retval %d size %d\n",
+ err, errno, retval, size);
+ bpf_object__close(obj);
+}
+
+
+
#define MAGIC_VAL 0x1234
#define NUM_ITER 100000
#define VIP_NUM 5
@@ -1177,6 +1208,7 @@ int main(void)
{
test_pkt_access();
test_xdp();
+ test_xdp_adjust_tail();
test_l4lb_all();
test_xdp_noinline();
test_tcp_estats();
--
2.15.1
next prev parent reply other threads:[~2018-04-18 13:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-18 4:42 [PATCH bpf-next v3 00/11] introduction of bpf_xdp_adjust_tail Nikita V. Shirokov
2018-04-18 4:42 ` [PATCH bpf-next v3 01/11] bpf: adding bpf_xdp_adjust_tail helper Nikita V. Shirokov
2018-04-18 17:01 ` Alexei Starovoitov
2018-04-18 4:42 ` [PATCH bpf-next v3 02/11] bpf: make generic xdp compatible w/ bpf_xdp_adjust_tail Nikita V. Shirokov
2018-04-18 4:42 ` [PATCH bpf-next v3 03/11] bpf: make mlx4 " Nikita V. Shirokov
2018-04-18 4:42 ` [PATCH bpf-next v3 04/11] bpf: make bnxt " Nikita V. Shirokov
2018-04-18 17:39 ` Michael Chan
2018-04-18 4:42 ` [PATCH bpf-next v3 05/11] bpf: make cavium thunder " Nikita V. Shirokov
2018-04-18 4:42 ` [PATCH bpf-next v3 06/11] bpf: make netronome nfp " Nikita V. Shirokov
2018-04-18 4:42 ` [PATCH bpf-next v3 07/11] bpf: make tun " Nikita V. Shirokov
2018-04-18 16:16 ` Michael S. Tsirkin
2018-04-18 4:42 ` [PATCH bpf-next v3 08/11] bpf: make virtio " Nikita V. Shirokov
2018-04-18 4:42 ` [PATCH bpf-next v3 09/11] bpf: making bpf_prog_test run aware of possible data_end ptr change Nikita V. Shirokov
2018-04-18 4:42 ` Nikita V. Shirokov [this message]
2018-04-18 4:42 ` [PATCH bpf-next v3 11/11] bpf: add bpf_xdp_adjust_tail sample prog Nikita V. Shirokov
2018-04-18 22:05 ` [PATCH bpf-next v3 00/11] introduction of bpf_xdp_adjust_tail Daniel Borkmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180418044223.17685-11-tehnerd@tehnerd.com \
--to=tehnerd@tehnerd.com \
--cc=ast@kernel.org \
--cc=daniel@iogearbox.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.