From: <pkshih@realtek.com>
To: <kvalo@codeaurora.org>
Cc: <Larry.Finger@lwfinger.net>, <linux-wireless@vger.kernel.org>,
<stable@vger.kernel.org>
Subject: [PATCH] rtlwifi: cleanup 8723be ant_sel definition
Date: Thu, 19 Apr 2018 16:31:00 +0800 [thread overview]
Message-ID: <20180419083100.5254-1-pkshih@realtek.com> (raw)
From: Ping-Ke Shih <pkshih@realtek.com>
The module parameter ant_sel is used to control antenna number and path.
There is an existing enum ANT_{X2,X1} defined the antenna number, so
add a new enum ANT_{MAIN,AUX} to make it readable. After this work,
incorrect given values depend on ant_sel were exposed, so refill values
according following definition:
ant_sel ant_num ant_path print_label
1 ANT_X1 ANT_AUX #2
2 ANT_X2 ANT_MAIN #1
Then, the workaround in halbtcoutsrc.c was removed.
The experimental results with single antenna connected to specific path
are in following:
ant_sel ANT_MAIN(#1) ANT_AUX(#2)
0 -8 -62
1 -62 -10
2 -6 -60
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Cc: Stable <stable@vger.kernel.org> # 4.7+
Reviewed-by: Larry Finger <Larry.Finger@lwfinger.net>
---
Hi Kalle,
This patch would send to 4.17.
Thanks
PK
---
.../net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c | 15 ---------------
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 11 +++++++----
drivers/net/wireless/realtek/rtlwifi/wifi.h | 5 +++++
3 files changed, 12 insertions(+), 19 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
index e0f9985582f9..738a7ea7dc4a 100644
--- a/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
+++ b/drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtcoutsrc.c
@@ -158,16 +158,6 @@ static u8 halbtc_get_wifi_central_chnl(struct btc_coexist *btcoexist)
static u8 rtl_get_hwpg_single_ant_path(struct rtl_priv *rtlpriv)
{
- struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
-
- /* override ant_num / ant_path */
- if (mod_params->ant_sel) {
- rtlpriv->btcoexist.btc_info.ant_num =
- (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
-
- rtlpriv->btcoexist.btc_info.single_ant_path =
- (mod_params->ant_sel == 1 ? 0 : 1);
- }
return rtlpriv->btcoexist.btc_info.single_ant_path;
}
@@ -178,7 +168,6 @@ static u8 rtl_get_hwpg_bt_type(struct rtl_priv *rtlpriv)
static u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
{
- struct rtl_mod_params *mod_params = rtlpriv->cfg->mod_params;
u8 num;
if (rtlpriv->btcoexist.btc_info.ant_num == ANT_X2)
@@ -186,10 +175,6 @@ static u8 rtl_get_hwpg_ant_num(struct rtl_priv *rtlpriv)
else
num = 1;
- /* override ant_num / ant_path */
- if (mod_params->ant_sel)
- num = (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1) + 1;
-
return num;
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index e7bbbc95cdb1..b4f3f91b590e 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -848,6 +848,9 @@ static bool _rtl8723be_init_mac(struct ieee80211_hw *hw)
return false;
}
+ if (rtlpriv->cfg->ops->get_btc_status())
+ rtlpriv->btcoexist.btc_ops->btc_power_on_setting(rtlpriv);
+
bytetmp = rtl_read_byte(rtlpriv, REG_MULTI_FUNC_CTRL);
rtl_write_byte(rtlpriv, REG_MULTI_FUNC_CTRL, bytetmp | BIT(3));
@@ -2696,21 +2699,21 @@ void rtl8723be_read_bt_coexist_info_from_hwpg(struct ieee80211_hw *hw,
rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
rtlpriv->btcoexist.btc_info.ant_num = (value & 0x1);
rtlpriv->btcoexist.btc_info.single_ant_path =
- (value & 0x40); /*0xc3[6]*/
+ (value & 0x40 ? ANT_AUX : ANT_MAIN); /*0xc3[6]*/
} else {
rtlpriv->btcoexist.btc_info.btcoexist = 0;
rtlpriv->btcoexist.btc_info.bt_type = BT_RTL8723B;
rtlpriv->btcoexist.btc_info.ant_num = ANT_X2;
- rtlpriv->btcoexist.btc_info.single_ant_path = 0;
+ rtlpriv->btcoexist.btc_info.single_ant_path = ANT_MAIN;
}
/* override ant_num / ant_path */
if (mod_params->ant_sel) {
rtlpriv->btcoexist.btc_info.ant_num =
- (mod_params->ant_sel == 1 ? ANT_X2 : ANT_X1);
+ (mod_params->ant_sel == 1 ? ANT_X1 : ANT_X2);
rtlpriv->btcoexist.btc_info.single_ant_path =
- (mod_params->ant_sel == 1 ? 0 : 1);
+ (mod_params->ant_sel == 1 ? ANT_AUX : ANT_MAIN);
}
}
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index c32985cfe48d..ab32a62ead81 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2882,6 +2882,11 @@ enum bt_ant_num {
ANT_X1 = 1,
};
+enum bt_ant_path {
+ ANT_MAIN = 0,
+ ANT_AUX = 1,
+};
+
enum bt_co_type {
BT_2WIRE = 0,
BT_ISSC_3WIRE = 1,
--
2.15.1
next reply other threads:[~2018-04-19 8:31 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-19 8:31 pkshih [this message]
2018-04-19 9:52 ` [PATCH] rtlwifi: cleanup 8723be ant_sel definition Kalle Valo
2018-04-19 12:53 ` Pkshih
2018-04-19 12:53 ` Pkshih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180419083100.5254-1-pkshih@realtek.com \
--to=pkshih@realtek.com \
--cc=Larry.Finger@lwfinger.net \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.