All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/5] sunxi: R40: add gigabit ethernet devicetree node
Date: Thu, 19 Apr 2018 10:40:50 +0200	[thread overview]
Message-ID: <20180419084050.vmqimfdvojdm3ox6@flea> (raw)
In-Reply-To: <20180417134235.10502-4-lothar.felten@gmail.com>

On Tue, Apr 17, 2018 at 03:42:34PM +0200, Lothar Felten wrote:
> Add a device tree node for the Allwinner R40/V40 CPU.
> The syscon node is required by the gmac driver.
> 
> Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
> ---
>  arch/arm/dts/sun8i-r40.dtsi | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/dts/sun8i-r40.dtsi b/arch/arm/dts/sun8i-r40.dtsi
> index ee22f6eb3a..93bf811014 100644
> --- a/arch/arm/dts/sun8i-r40.dtsi
> +++ b/arch/arm/dts/sun8i-r40.dtsi
> @@ -114,6 +114,12 @@
>  		#size-cells = <1>;
>  		ranges;
>  
> +		syscon: syscon at 1c00000 {
> +			compatible = "allwinner,sun8i-r40-system-controller",
> +				"syscon";
> +			reg = <0x01c00000 0x1000>;
> +		};

As far as I understood it, the GMAC configuration register is not in
the system controller on the R40, but in the clock controller.

> +
>  		pio: pinctrl at 1c20800 {
>  			compatible = "allwinner,sun8i-r40-pinctrl";
>  			reg = <0x01c20800 0x400>;
> @@ -168,6 +174,28 @@
>  			#size-cells = <0>;
>  		};
>  
> +		gmac: ethernet at 01c50000 {
> +			compatible = "allwinner,sun8i-h3-emac";
> +			syscon = <&syscon>;
> +			reg = <0x01c50000 0x2000>;
> +			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "macirq";
> +			clocks = <&osc24M>, <&osc24M>;
> +			clock-names = "stmmaceth", "allwinner_gmac_tx";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&gmac_pins_rgmii>;
> +			phy-mode = "rgmii";
> +			status = "disabled";
> +
> +			mdio: mdio {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				compatible = "snps,dwmac-mdio";
> +			};
> +		};
> +

And I guess this is just some temporary binding while waiting for
"real" ones to land in Linux?

Maxime

-- 
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20180419/cf721dae/attachment.sig>

  reply	other threads:[~2018-04-19  8:40 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-17 13:42 [U-Boot] [PATCH v2 1/5] sunxi: R40: add gigabit ethernet clocks Lothar Felten
2018-04-17 13:42 ` [U-Boot] [PATCH v2 2/5] sunxi: R40: add gigabit ethernet reset Lothar Felten
2018-04-19  8:35   ` Maxime Ripard
2018-04-17 13:42 ` [U-Boot] [PATCH v2 3/5] sunxi: R40: add gigabit ethernet gpio pinmux Lothar Felten
2018-04-19  8:35   ` Maxime Ripard
2018-04-17 13:42 ` [U-Boot] [PATCH v2 4/5] sunxi: R40: add gigabit ethernet devicetree node Lothar Felten
2018-04-19  8:40   ` Maxime Ripard [this message]
2018-04-17 13:42 ` [U-Boot] [PATCH v2 5/5] configs: Bananapi_M2_Ultra: enable gigabit on the Bananapi M2U Lothar Felten
2018-04-19  8:41   ` Maxime Ripard
2018-04-23 17:39     ` Lothar Felten
2018-04-19  8:34 ` [U-Boot] [PATCH v2 1/5] sunxi: R40: add gigabit ethernet clocks Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180419084050.vmqimfdvojdm3ox6@flea \
    --to=maxime.ripard@bootlin.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.