From: Stefan Schake <stschake@gmail.com>
To: eric@anholt.net
Cc: airlied@linux.ie, linux-rpi-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org,
Stefan Schake <stschake@gmail.com>
Subject: [PATCH] drm/vc4: Add support for plane alpha
Date: Fri, 20 Apr 2018 16:05:03 -0700 [thread overview]
Message-ID: <20180420230503.9629-1-stschake@gmail.com> (raw)
The HVS supports mixing fixed alpha with per-pixel alpha or
setting a fixed plane alpha in case there is no per-pixel information.
This allows us to support the generic DRM plane alpha property.
Signed-off-by: Stefan Schake <stschake@gmail.com>
---
drivers/gpu/drm/vc4/vc4_plane.c | 14 +++++++++++++-
drivers/gpu/drm/vc4/vc4_regs.h | 1 +
2 files changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c
index c3a37a99e601..b06e0ec013c5 100644
--- a/drivers/gpu/drm/vc4/vc4_plane.c
+++ b/drivers/gpu/drm/vc4/vc4_plane.c
@@ -201,6 +201,7 @@ static void vc4_plane_reset(struct drm_plane *plane)
return;
plane->state = &vc4_state->base;
+ plane->state->alpha = DRM_BLEND_ALPHA_OPAQUE;
vc4_state->base.plane = plane;
}
@@ -467,6 +468,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
u32 ctl0_offset = vc4_state->dlist_count;
const struct hvs_format *format = vc4_get_hvs_format(fb->format->format);
int num_planes = drm_format_num_planes(format->drm);
+ bool mix_plane_alpha;
bool covers_screen;
u32 scl0, scl1, pitch0;
u32 lbm_size, tiling;
@@ -552,7 +554,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
/* Position Word 0: Image Positions and Alpha Value */
vc4_state->pos0_offset = vc4_state->dlist_count;
vc4_dlist_write(vc4_state,
- VC4_SET_FIELD(0xff, SCALER_POS0_FIXED_ALPHA) |
+ VC4_SET_FIELD(state->alpha >> 8, SCALER_POS0_FIXED_ALPHA) |
VC4_SET_FIELD(vc4_state->crtc_x, SCALER_POS0_START_X) |
VC4_SET_FIELD(vc4_state->crtc_y, SCALER_POS0_START_Y));
@@ -565,6 +567,13 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
SCALER_POS1_SCL_HEIGHT));
}
+ /* Don't waste cycles mixing with plane alpha if the set alpha
+ * is opaque or there is no per-pixel alpha information.
+ * In any case we use the alpha property value as the fixed alpha.
+ */
+ mix_plane_alpha = state->alpha != DRM_BLEND_ALPHA_OPAQUE &&
+ fb->format->has_alpha;
+
/* Position Word 2: Source Image Size, Alpha */
vc4_state->pos2_offset = vc4_state->dlist_count;
vc4_dlist_write(vc4_state,
@@ -572,6 +581,7 @@ static int vc4_plane_mode_set(struct drm_plane *plane,
SCALER_POS2_ALPHA_MODE_PIPELINE :
SCALER_POS2_ALPHA_MODE_FIXED,
SCALER_POS2_ALPHA_MODE) |
+ (mix_plane_alpha ? SCALER_POS2_ALPHA_MIX : 0) |
(fb->format->has_alpha ? SCALER_POS2_ALPHA_PREMULT : 0) |
VC4_SET_FIELD(vc4_state->src_w[0], SCALER_POS2_WIDTH) |
VC4_SET_FIELD(vc4_state->src_h[0], SCALER_POS2_HEIGHT));
@@ -916,5 +926,7 @@ struct drm_plane *vc4_plane_init(struct drm_device *dev,
drm_plane_helper_add(plane, &vc4_plane_helper_funcs);
+ drm_plane_create_alpha_property(plane);
+
return plane;
}
diff --git a/drivers/gpu/drm/vc4/vc4_regs.h b/drivers/gpu/drm/vc4/vc4_regs.h
index 4af3e29d076a..d1fb6fec46eb 100644
--- a/drivers/gpu/drm/vc4/vc4_regs.h
+++ b/drivers/gpu/drm/vc4/vc4_regs.h
@@ -945,6 +945,7 @@ enum hvs_pixel_format {
#define SCALER_POS2_ALPHA_MODE_FIXED_NONZERO 2
#define SCALER_POS2_ALPHA_MODE_FIXED_OVER_0x07 3
#define SCALER_POS2_ALPHA_PREMULT BIT(29)
+#define SCALER_POS2_ALPHA_MIX BIT(28)
#define SCALER_POS2_HEIGHT_MASK VC4_MASK(27, 16)
#define SCALER_POS2_HEIGHT_SHIFT 16
--
2.14.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next reply other threads:[~2018-04-20 23:05 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-20 23:05 Stefan Schake [this message]
2018-04-20 23:45 ` [PATCH] drm/vc4: Add support for plane alpha Eric Anholt
2018-04-21 0:07 ` Stefan Schake
2018-04-22 18:56 ` kbuild test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180420230503.9629-1-stschake@gmail.com \
--to=stschake@gmail.com \
--cc=airlied@linux.ie \
--cc=dri-devel@lists.freedesktop.org \
--cc=eric@anholt.net \
--cc=linux-rpi-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.