All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v4: Add Bananapi M2 Berry support
Date: Fri, 27 Apr 2018 17:33:42 +0530	[thread overview]
Message-ID: <20180427120342.32341-2-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180427120342.32341-1-jagan@amarulasolutions.com>

Banana Pi BPI-M2 Berry is a quad-core mini single board computer
built with Allwinner V40 SoC. It features
- Quad Core ARM Cortex A7 CPU V40
- 1GB of RAM .
- microSD/SATA port..
- onboard WiFi and BT
- 4 USB A 2.0 ports
- 1 USB OTG port
- 1 HDMI port
- 1 audio jack
- DC power port

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Changes for v2:
- Reused R40 configs for V40 SOC

 arch/arm/dts/Makefile                        |   3 +-
 arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts | 132 +++++++++++++++++++++++++++
 board/sunxi/MAINTAINERS                      |   5 +
 configs/bananapi_m2_berry_defconfig          |  14 +++
 4 files changed, 153 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
 create mode 100644 configs/bananapi_m2_berry_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ac7667b1e8..ab0b2568ea 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -366,7 +366,8 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-nanopi-neo.dtb \
 	sun8i-h3-nanopi-neo-air.dtb
 dtb-$(CONFIG_MACH_SUN8I_R40) += \
-	sun8i-r40-bananapi-m2-ultra.dtb
+	sun8i-r40-bananapi-m2-ultra.dtb \
+	sun8i-v40-bananapi-m2-berry.dtb
 dtb-$(CONFIG_MACH_SUN8I_V3S) += \
 	sun8i-v3s-licheepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN50I_H5) += \
diff --git a/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
new file mode 100644
index 0000000000..193d9b29ec
--- /dev/null
+++ b/arch/arm/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -0,0 +1,132 @@
+/*
+ * Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-r40.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Banana Pi M2 Berry";
+	compatible = "sinovoip,bpi-m2-berry", "allwinner,sun8i-r40";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	axp22x: pmic at 68 {
+		compatible = "x-powers,axp221";
+		reg = <0x34>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+#include "axp22x.dtsi"
+
+&reg_aldo3 {
+	regulator-always-on;
+	regulator-min-microvolt = <2700000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "avcc";
+};
+
+&reg_dcdc1 {
+	regulator-always-on;
+	regulator-min-microvolt = <3000000>;
+	regulator-max-microvolt = <3000000>;
+	regulator-name = "vcc-3v0";
+};
+
+&reg_dcdc2 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+	regulator-always-on;
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1300000>;
+	regulator-name = "vdd-sys";
+};
+
+&reg_dcdc5 {
+	regulator-always-on;
+	regulator-min-microvolt = <1500000>;
+	regulator-max-microvolt = <1500000>;
+	regulator-name = "vcc-dram";
+};
+
+&reg_dldo1 {
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi-io";
+};
+
+&reg_dldo2 {
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-name = "vcc-wifi";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdc1>;
+	bus-width = <4>;
+	cd-gpios = <&pio 7 13 GPIO_ACTIVE_LOW>; /* PH13 */
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pb_pins>;
+	status = "okay";
+};
diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 6dd48c0265..5d31bcbdcd 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -126,6 +126,11 @@ M:	Jagan Teki <jagan@amarulasolutions.com>
 S:	Maintained
 F:	configs/bananapi_m1_plus_defconfig
 
+BANANAPI M2 BERRY
+M:	Jagan Teki <jagan@amarulasolutions.com>
+S:	Maintained
+F:	configs/bananapi_m2_berry_defconfig
+
 BANANAPI M2 ULTRA BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig
new file mode 100644
index 0000000000..9d75108d04
--- /dev/null
+++ b/configs/bananapi_m2_berry_defconfig
@@ -0,0 +1,14 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN8I_R40=y
+CONFIG_DRAM_CLK=576
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PH13"
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-v40-bananapi-m2-berry"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_I2C_SUPPORT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_AXP_DLDO4_VOLT=2500
+CONFIG_AXP_ELDO3_VOLT=1200
-- 
2.14.3

  reply	other threads:[~2018-04-27 12:03 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-27 12:03 [U-Boot] [PATCH v2 1/2] ARM: dts: sun8i: Sync r40 dtsi from Linux Jagan Teki
2018-04-27 12:03 ` Jagan Teki [this message]
2018-05-02  9:16   ` [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v4: Add Bananapi M2 Berry support Maxime Ripard
2018-05-09 10:58     ` Jagan Teki
2018-08-14 21:52     ` [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v40: " Alan Beard
2018-08-15  5:59       ` Jagan Teki
2018-05-09 11:00 ` [U-Boot] [PATCH v2 1/2] ARM: dts: sun8i: Sync r40 dtsi from Linux Jagan Teki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180427120342.32341-2-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.