From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
Karthikeyan Periyasamy <periyasa@codeaurora.org>,
Kalle Valo <kvalo@codeaurora.org>, Takashi Iwai <tiwai@suse.de>
Subject: [PATCH 4.14 07/80] Revert "ath10k: send (re)assoc peer command when NSS changed"
Date: Fri, 27 Apr 2018 15:58:00 +0200 [thread overview]
Message-ID: <20180427135733.314628324@linuxfoundation.org> (raw)
In-Reply-To: <20180427135732.928644313@linuxfoundation.org>
4.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Karthikeyan Periyasamy <periyasa@codeaurora.org>
commit 55cc11da69895a680940c1733caabc37be685f5e upstream.
This reverts commit 55884c045d31a29cf69db8332d1064a1b61dd159.
When Ath10k is in AP mode and an unassociated STA sends a VHT action frame
(Operating Mode Notification for the NSS change) periodically to AP this causes
ath10k to call ath10k_station_assoc() which sends WMI_PEER_ASSOC_CMDID during
NSS update. Over the time (with a certain client it can happen within 15 mins
when there are over 500 of these VHT action frames) continuous calls of
WMI_PEER_ASSOC_CMDID cause firmware to assert due to resource exhaust.
To my knowledge setting WMI_PEER_NSS peer param itself enough to handle NSS
updates and no need to call ath10k_station_assoc(). So revert the original
commit from 2014 as it's unclear why the change was really needed.
Now the firmware assert doesn't happen anymore.
Issue observed in QCA9984 platform with firmware version:10.4-3.5.3-00053.
This Change tested in QCA9984 with firmware version: 10.4-3.5.3-00053 and
QCA988x platform with firmware version: 10.2.4-1.0-00036.
Firmware Assert log:
ath10k_pci 0002:01:00.0: firmware crashed! (guid e61f1274-9acd-4c5b-bcca-e032ea6e723c)
ath10k_pci 0002:01:00.0: qca9984/qca9994 hw1.0 target 0x01000000 chip_id 0x00000000 sub 168c:cafe
ath10k_pci 0002:01:00.0: kconfig debug 1 debugfs 1 tracing 0 dfs 1 testmode 1
ath10k_pci 0002:01:00.0: firmware ver 10.4-3.5.3-00053 api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast crc32 4c56a386
ath10k_pci 0002:01:00.0: board_file api 2 bmi_id 0:4 crc32 c2271344
ath10k_pci 0002:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal otp max-sta 512 raw 0 hwcrypto 1
ath10k_pci 0002:01:00.0: firmware register dump:
ath10k_pci 0002:01:00.0: [00]: 0x0000000A 0x000015B3 0x00981E5F 0x00975B31
ath10k_pci 0002:01:00.0: [04]: 0x00981E5F 0x00060530 0x00000011 0x00446C60
ath10k_pci 0002:01:00.0: [08]: 0x0042F1FC 0x00458080 0x00000017 0x00000000
ath10k_pci 0002:01:00.0: [12]: 0x00000009 0x00000000 0x00973ABC 0x00973AD2
ath10k_pci 0002:01:00.0: [16]: 0x00973AB0 0x00960E62 0x009606CA 0x00000000
ath10k_pci 0002:01:00.0: [20]: 0x40981E5F 0x004066DC 0x00400000 0x00981E34
ath10k_pci 0002:01:00.0: [24]: 0x80983B48 0x0040673C 0x000000C0 0xC0981E5F
ath10k_pci 0002:01:00.0: [28]: 0x80993DEB 0x0040676C 0x00431AB8 0x0045D0C4
ath10k_pci 0002:01:00.0: [32]: 0x80993E5C 0x004067AC 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [36]: 0x80994AAB 0x004067DC 0x00000000 0x0045D0C4
ath10k_pci 0002:01:00.0: [40]: 0x809971A0 0x0040681C 0x004303C0 0x00441B00
ath10k_pci 0002:01:00.0: [44]: 0x80991904 0x0040688C 0x004303C0 0x0045D0C4
ath10k_pci 0002:01:00.0: [48]: 0x80963AD3 0x00406A7C 0x004303C0 0x009918FC
ath10k_pci 0002:01:00.0: [52]: 0x80960E80 0x00406A9C 0x0000001F 0x00400000
ath10k_pci 0002:01:00.0: [56]: 0x80960E51 0x00406ACC 0x00400000 0x00000000
ath10k_pci 0002:01:00.0: Copy Engine register dump:
ath10k_pci 0002:01:00.0: index: addr: sr_wr_idx: sr_r_idx: dst_wr_idx: dst_r_idx:
ath10k_pci 0002:01:00.0: [00]: 0x0004a000 15 15 3 3
ath10k_pci 0002:01:00.0: [01]: 0x0004a400 17 17 212 213
ath10k_pci 0002:01:00.0: [02]: 0x0004a800 21 21 20 21
ath10k_pci 0002:01:00.0: [03]: 0x0004ac00 25 25 27 25
ath10k_pci 0002:01:00.0: [04]: 0x0004b000 515 515 144 104
ath10k_pci 0002:01:00.0: [05]: 0x0004b400 28 28 155 156
ath10k_pci 0002:01:00.0: [06]: 0x0004b800 12 12 12 12
ath10k_pci 0002:01:00.0: [07]: 0x0004bc00 1 1 1 1
ath10k_pci 0002:01:00.0: [08]: 0x0004c000 0 0 127 0
ath10k_pci 0002:01:00.0: [09]: 0x0004c400 1 1 1 1
ath10k_pci 0002:01:00.0: [10]: 0x0004c800 0 0 0 0
ath10k_pci 0002:01:00.0: [11]: 0x0004cc00 0 0 0 0
ath10k_pci 0002:01:00.0: CE[1] write_index 212 sw_index 213 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: CE[2] write_index 20 sw_index 21 hw_index 0 nentries_mask 0x0000007f
ath10k_pci 0002:01:00.0: CE[5] write_index 155 sw_index 156 hw_index 0 nentries_mask 0x000001ff
ath10k_pci 0002:01:00.0: DMA addr: nbytes: meta data: byte swap: gather:
ath10k_pci 0002:01:00.0: [455]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [456]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [457]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [458]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [459]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [460]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [461]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [462]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [463]: 0x580c0c42 0 0 0 0
ath10k_pci 0002:01:00.0: [464]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [465]: 0x580c0a42 0 0 0 0
ath10k_pci 0002:01:00.0: [466]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [467]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [468]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [469]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [470]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [471]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [472]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [473]: 0x580c1c42 0 0 0 0
ath10k_pci 0002:01:00.0: [474]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [475]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [476]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [477]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [478]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [479]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [480]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [481]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [482]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [483]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [484]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [485]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [486]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [487]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [488]: 0x594a0038 0 0 0 1
ath10k_pci 0002:01:00.0: [489]: 0x580c0842 0 0 0 0
ath10k_pci 0002:01:00.0: [490]: 0x594a0060 0 0 0 1
ath10k_pci 0002:01:00.0: [491]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [492]: 0x58174040 0 1 0 0
ath10k_pci 0002:01:00.0: [493]: 0x5a946040 0 1 0 0
ath10k_pci 0002:01:00.0: [494]: 0x59909040 0 1 0 0
ath10k_pci 0002:01:00.0: [495]: 0x5ae5a040 0 1 0 0
ath10k_pci 0002:01:00.0: [496]: 0x58096040 0 1 0 0
ath10k_pci 0002:01:00.0: [497]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [498]: 0x580c0642 0 0 0 0
ath10k_pci 0002:01:00.0: [499]: 0x5c1e0040 0 1 0 0
ath10k_pci 0002:01:00.0: [500]: 0x58153040 0 1 0 0
ath10k_pci 0002:01:00.0: [501]: 0x58129040 0 1 0 0
ath10k_pci 0002:01:00.0: [502]: 0x5952f040 0 1 0 0
ath10k_pci 0002:01:00.0: [503]: 0x59535040 0 1 0 0
ath10k_pci 0002:01:00.0: [504]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [505]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [506]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [507]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [508]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [509]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [510]: 0x594a0010 0 0 0 1
ath10k_pci 0002:01:00.0: [511]: 0x580c0042 0 0 0 0
ath10k_pci 0002:01:00.0: [512]: 0x5adcc040 0 1 0 0
ath10k_pci 0002:01:00.0: [513]: 0x5cf3d040 0 1 0 0
ath10k_pci 0002:01:00.0: [514]: 0x5c1e9040 64 1 0 0
ath10k_pci 0002:01:00.0: [515]: 0x00000000 0 0 0 0
Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/wireless/ath/ath10k/mac.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -5955,9 +5955,8 @@ static void ath10k_sta_rc_update_wk(stru
sta->addr, smps, err);
}
- if (changed & IEEE80211_RC_SUPP_RATES_CHANGED ||
- changed & IEEE80211_RC_NSS_CHANGED) {
- ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates/nss\n",
+ if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) {
+ ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates\n",
sta->addr);
err = ath10k_station_assoc(ar, arvif->vif, sta, true);
next prev parent reply other threads:[~2018-04-27 14:07 UTC|newest]
Thread overview: 90+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-27 13:57 [PATCH 4.14 00/80] 4.14.38-stable review Greg Kroah-Hartman
2018-04-27 13:57 ` [PATCH 4.14 01/80] Revert "pinctrl: intel: Initialize GPIO properly when used through irqchip" Greg Kroah-Hartman
2018-04-27 13:57 ` [PATCH 4.14 02/80] drm: bridge: dw-hdmi: Fix overflow workaround for Amlogic Meson GX SoCs Greg Kroah-Hartman
2018-04-27 13:57 ` [PATCH 4.14 03/80] i40e: Fix attach VF to VM issue Greg Kroah-Hartman
2018-04-27 13:57 ` [PATCH 4.14 04/80] tpm: cmd_ready command can be issued only after granting locality Greg Kroah-Hartman
2018-04-27 13:57 ` [PATCH 4.14 05/80] tpm: tpm-interface: fix tpm_transmit/_cmd kdoc Greg Kroah-Hartman
2018-04-27 13:57 ` [PATCH 4.14 06/80] tpm: add retry logic Greg Kroah-Hartman
2018-04-27 13:58 ` Greg Kroah-Hartman [this message]
2018-04-27 13:58 ` [PATCH 4.14 08/80] bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslave Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 09/80] ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policy Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 10/80] ipv6: sr: fix NULL pointer dereference in seg6_do_srh_encap()- v4 pkts Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 11/80] KEYS: DNS: limit the length of option strings Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 12/80] l2tp: check sockaddr length in pppol2tp_connect() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 13/80] net: validate attribute sizes in neigh_dump_table() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 14/80] llc: delete timers synchronously in llc_sk_free() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 15/80] tcp: dont read out-of-bounds opsize Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 16/80] net: af_packet: fix race in PACKET_{R|T}X_RING Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 17/80] tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 18/80] net: fix deadlock while clearing neighbor proxy table Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 19/80] team: avoid adding twice the same option to the event list Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 20/80] net/smc: fix shutdown in state SMC_LISTEN Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 21/80] team: fix netconsole setup over team Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 22/80] packet: fix bitfield update race Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 23/80] tipc: add policy for TIPC_NLA_NET_ADDR Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 24/80] pppoe: check sockaddr length in pppoe_connect() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 25/80] vlan: Fix reading memory beyond skb->tail in skb_vlan_tagged_multi Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 26/80] amd-xgbe: Add pre/post auto-negotiation phy hooks Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 27/80] sctp: do not check port in sctp_inet6_cmp_addr Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 28/80] amd-xgbe: Improve KR auto-negotiation and training Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 29/80] strparser: Do not call mod_delayed_work with a timeout of LONG_MAX Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 30/80] amd-xgbe: Only use the SFP supported transceiver signals Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 31/80] strparser: Fix incorrect strp->need_bytes value Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 32/80] net: sched: ife: signal not finding metaid Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 33/80] tcp: clear tp->packets_out when purging write queue Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 34/80] net: sched: ife: handle malformed tlv length Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 35/80] net: sched: ife: check on metadata length Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 36/80] llc: hold llc_sap before release_sock() Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 37/80] llc: fix NULL pointer deref for SOCK_ZAPPED Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 38/80] net: ethernet: ti: cpsw: fix tx vlan priority mapping Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 39/80] virtio_net: split out ctrl buffer Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 40/80] virtio_net: fix adding vids on big-endian Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 41/80] Revert "microblaze: fix endian handling" Greg Kroah-Hartman
2018-04-27 15:43 ` Guenter Roeck
2018-04-27 16:25 ` Guenter Roeck
2018-04-28 5:50 ` Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 42/80] s390: introduce CPU alternatives Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 43/80] s390: enable CPU alternatives unconditionally Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 44/80] KVM: s390: wire up bpb feature Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 45/80] s390: scrub registers on kernel entry and KVM exit Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 46/80] s390: add optimized array_index_mask_nospec Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 47/80] s390/alternative: use a copy of the facility bit mask Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 48/80] s390: add options to change branch prediction behaviour for the kernel Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 49/80] s390: run user space and KVM guests with modified branch prediction Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 50/80] s390: introduce execute-trampolines for branches Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 51/80] KVM: s390: force bp isolation for VSIE Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 52/80] s390: Replace IS_ENABLED(EXPOLINE_*) with IS_ENABLED(CONFIG_EXPOLINE_*) Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 53/80] s390: do not bypass BPENTER for interrupt system calls Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 54/80] s390/entry.S: fix spurious zeroing of r0 Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 55/80] s390: move nobp parameter functions to nospec-branch.c Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 56/80] s390: add automatic detection of the spectre defense Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 57/80] s390: report spectre mitigation via syslog Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 58/80] s390: add sysfs attributes for spectre Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 59/80] s390: correct nospec auto detection init order Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 60/80] s390: correct module section names for expoline code revert Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 61/80] microblaze: Setup dependencies for ASM optimized lib functions Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 62/80] arm64: dts: rockchip: remove vdd_log from rk3399-puma Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 63/80] Revert "mm/hmm: fix header file if/else/endif maze" Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 64/80] commoncap: Handle memory allocation failure Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 65/80] scsi: mptsas: Disable WRITE SAME Greg Kroah-Hartman
2018-04-27 13:58 ` [PATCH 4.14 66/80] cdrom: information leak in cdrom_ioctl_media_changed() Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 67/80] fsnotify: Fix fsnotify_mark_connector race Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 68/80] m68k/mac: Dont remap SWIM MMIO region Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 69/80] block/swim: Check drive type Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 70/80] block/swim: Dont log an error message for an invalid ioctl Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 71/80] block/swim: Remove extra put_disk() call from error path Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 72/80] block/swim: Rename macros to avoid inconsistent inverted logic Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 73/80] block/swim: Select appropriate drive on device open Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 74/80] block/swim: Fix array bounds check Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 75/80] block/swim: Fix IO error at end of medium Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 76/80] tracing: Fix missing tab for hwlat_detector print format Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 77/80] s390/cio: update chpid descriptor after resource accessibility event Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 78/80] s390/dasd: fix IO error for newly defined devices Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 79/80] s390/uprobes: implement arch_uretprobe_is_alive() Greg Kroah-Hartman
2018-04-27 13:59 ` [PATCH 4.14 80/80] ACPI / video: Only default only_lcd to true on Win8-ready _desktops_ Greg Kroah-Hartman
2018-04-27 18:14 ` [PATCH 4.14 00/80] 4.14.38-stable review Shuah Khan
2018-04-27 19:24 ` kernelci.org bot
2018-04-27 19:33 ` Nathan Chancellor
2018-04-28 5:06 ` Greg Kroah-Hartman
2018-04-27 20:37 ` Dan Rue
2018-04-28 14:28 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180427135733.314628324@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=periyasa@codeaurora.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.