From: Nicholas Piggin <npiggin@gmail.com>
To: linuxppc-dev@lists.ozlabs.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 11/15] tty: hvc: hvc_poll break hv read loop
Date: Tue, 1 May 2018 00:55:54 +1000 [thread overview]
Message-ID: <20180430145558.4308-12-npiggin@gmail.com> (raw)
In-Reply-To: <20180430145558.4308-1-npiggin@gmail.com>
Avoid looping with the spinlock held while there is read data
being returned from the hv driver. Instead note if the entire
size returned by tty_buffer_request_room was read, and request
another read poll.
This limits the critical section lengths, and provides more
even service to other consoles in case there is a pathological
condition.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
drivers/tty/hvc/hvc_console.c | 88 ++++++++++++++++++-----------------
1 file changed, 45 insertions(+), 43 deletions(-)
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index fddb63322c67..745ac220fce8 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -592,7 +592,7 @@ static u32 timeout = MIN_TIMEOUT;
int hvc_poll(struct hvc_struct *hp)
{
struct tty_struct *tty;
- int i, n, poll_mask = 0;
+ int i, n, count, poll_mask = 0;
char buf[N_INBUF] __ALIGNED__;
unsigned long flags;
int read_total = 0;
@@ -618,7 +618,7 @@ int hvc_poll(struct hvc_struct *hp)
/* Now check if we can get data (are we throttled ?) */
if (tty_throttled(tty))
- goto throttled;
+ goto out;
/* If we aren't notifier driven and aren't throttled, we always
* request a reschedule
@@ -627,56 +627,58 @@ int hvc_poll(struct hvc_struct *hp)
poll_mask |= HVC_POLL_READ;
/* Read data if any */
- for (;;) {
- int count = tty_buffer_request_room(&hp->port, N_INBUF);
- /* If flip is full, just reschedule a later read */
- if (count == 0) {
+ count = tty_buffer_request_room(&hp->port, N_INBUF);
+
+ /* If flip is full, just reschedule a later read */
+ if (count == 0) {
+ poll_mask |= HVC_POLL_READ;
+ goto out;
+ }
+
+ n = hp->ops->get_chars(hp->vtermno, buf, count);
+ if (n <= 0) {
+ /* Hangup the tty when disconnected from host */
+ if (n == -EPIPE) {
+ spin_unlock_irqrestore(&hp->lock, flags);
+ tty_hangup(tty);
+ spin_lock_irqsave(&hp->lock, flags);
+ } else if ( n == -EAGAIN ) {
+ /*
+ * Some back-ends can only ensure a certain min
+ * num of bytes read, which may be > 'count'.
+ * Let the tty clear the flip buff to make room.
+ */
poll_mask |= HVC_POLL_READ;
- break;
}
+ goto out;
+ }
- n = hp->ops->get_chars(hp->vtermno, buf, count);
- if (n <= 0) {
- /* Hangup the tty when disconnected from host */
- if (n == -EPIPE) {
- spin_unlock_irqrestore(&hp->lock, flags);
- tty_hangup(tty);
- spin_lock_irqsave(&hp->lock, flags);
- } else if ( n == -EAGAIN ) {
- /*
- * Some back-ends can only ensure a certain min
- * num of bytes read, which may be > 'count'.
- * Let the tty clear the flip buff to make room.
- */
- poll_mask |= HVC_POLL_READ;
- }
- break;
- }
- for (i = 0; i < n; ++i) {
+ for (i = 0; i < n; ++i) {
#ifdef CONFIG_MAGIC_SYSRQ
- if (hp->index == hvc_console.index) {
- /* Handle the SysRq Hack */
- /* XXX should support a sequence */
- if (buf[i] == '\x0f') { /* ^O */
- /* if ^O is pressed again, reset
- * sysrq_pressed and flip ^O char */
- sysrq_pressed = !sysrq_pressed;
- if (sysrq_pressed)
- continue;
- } else if (sysrq_pressed) {
- handle_sysrq(buf[i]);
- sysrq_pressed = 0;
+ if (hp->index == hvc_console.index) {
+ /* Handle the SysRq Hack */
+ /* XXX should support a sequence */
+ if (buf[i] == '\x0f') { /* ^O */
+ /* if ^O is pressed again, reset
+ * sysrq_pressed and flip ^O char */
+ sysrq_pressed = !sysrq_pressed;
+ if (sysrq_pressed)
continue;
- }
+ } else if (sysrq_pressed) {
+ handle_sysrq(buf[i]);
+ sysrq_pressed = 0;
+ continue;
}
-#endif /* CONFIG_MAGIC_SYSRQ */
- tty_insert_flip_char(&hp->port, buf[i], 0);
}
-
- read_total += n;
+#endif /* CONFIG_MAGIC_SYSRQ */
+ tty_insert_flip_char(&hp->port, buf[i], 0);
}
- throttled:
+ if (n == count)
+ poll_mask |= HVC_POLL_READ;
+ read_total = n;
+
+ out:
/* Wakeup write queue if necessary */
if (hp->do_wakeup) {
hp->do_wakeup = 0;
--
2.17.0
next prev parent reply other threads:[~2018-04-30 14:56 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-30 14:55 [PATCH 00/15] hvc and powerpc opal console latency reduction Nicholas Piggin
2018-04-30 14:55 ` [PATCH 01/15] powerpc/powernv: opal_put_chars partial write fix Nicholas Piggin
2018-07-24 13:59 ` [01/15] " Michael Ellerman
2018-04-30 14:55 ` [PATCH 02/15] powerpc/powernv: Fix OPAL console driver OPAL_BUSY loops Nicholas Piggin
2018-04-30 14:55 ` [PATCH 03/15] powerpc/powernv: opal-kmsg standardise OPAL_BUSY handling Nicholas Piggin
2018-04-30 14:55 ` [PATCH 04/15] powerpc/powernv: opal-kmsg use flush fallback from console code Nicholas Piggin
2018-05-04 5:16 ` Michael Ellerman
2018-05-04 5:37 ` Nicholas Piggin
2018-05-07 10:36 ` Michael Ellerman
2018-05-08 3:40 ` Nicholas Piggin
2018-04-30 14:55 ` [PATCH 05/15] powerpc/powernv: Implement and use opal_flush_console Nicholas Piggin
2018-04-30 14:55 ` [PATCH 06/15] powerpc/powernv: Remove OPALv1 support from opal console driver Nicholas Piggin
2018-04-30 14:55 ` [PATCH 07/15] powerpc/powernv: move opal console flushing to udbg Nicholas Piggin
2018-04-30 14:55 ` [PATCH 08/15] powerpc/powernv: implement opal_put_chars_atomic Nicholas Piggin
2018-05-01 9:48 ` Benjamin Herrenschmidt
2018-05-01 10:37 ` Nicholas Piggin
2018-05-07 10:35 ` Michael Ellerman
2018-05-08 3:36 ` Nicholas Piggin
2018-04-30 14:55 ` [PATCH 09/15] tty: hvc: remove unexplained "just in case" spin delay Nicholas Piggin
2018-04-30 14:55 ` [PATCH 10/15] tty: hvc: use mutex instead of spinlock for hvc_structs lock Nicholas Piggin
2018-08-13 11:22 ` [10/15] " Michael Ellerman
2018-04-30 14:55 ` Nicholas Piggin [this message]
2018-08-13 11:23 ` [11/15] tty: hvc: hvc_poll break hv read loop Michael Ellerman
2018-04-30 14:55 ` [PATCH 12/15] tty: hvc: hvc_poll may sleep Nicholas Piggin
2018-08-13 11:23 ` [12/15] " Michael Ellerman
2018-04-30 14:55 ` [PATCH 13/15] tty: hvc: hvc_write " Nicholas Piggin
2018-08-13 11:23 ` [13/15] " Michael Ellerman
2018-04-30 14:55 ` [PATCH 14/15] tty: hvc: introduce the hv_ops.flush operation for hvc drivers Nicholas Piggin
2018-08-13 11:23 ` [14/15] " Michael Ellerman
2018-04-30 14:55 ` [PATCH 15/15] powerpc/powernv: provide a console flush operation for opal hvc driver Nicholas Piggin
2018-08-21 10:35 ` [15/15] " Michael Ellerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180430145558.4308-12-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=benh@kernel.crashing.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.