From: Nicolas Porcel <nicolasporcel06@gmail.com>
To: linux-btrfs@vger.kernel.org
Subject: send ioctl failed with -2
Date: Tue, 8 May 2018 19:44:12 +0200 [thread overview]
Message-ID: <20180508174412.GA3058@nicolas-desktop> (raw)
[-- Attachment #1: Type: text/plain, Size: 1845 bytes --]
Hello,
When I do a btrfs send, I get the following error code:
# btrfs send mysnapshot > /dev/null
ERROR: send ioctl failed with -2: No such file or directory
I get it after 70-100% of the bytes are sent.
$ uname -a
Linux nicolas-desktop 4.17.0-rc2_3+ #1 SMP PREEMPT Tue May 8 01:14:47 CEST 2018 x86_64 GNU/Linux
$ btrfs --version
btrfs-progs v4.16.1
# btrfs fi show
Label: 'ssd' uuid: 135e8b6e-c5e5-4d2c-8c1a-62093b41ed1c
Total devices 1 FS bytes used 178.72GiB
devid 1 size 238.47GiB used 238.47GiB path /dev/sdb1
# btrfs fi df /home
Data, single: total=226.44GiB, used=173.10GiB
System, single: total=32.00MiB, used=48.00KiB
Metadata, single: total=12.00GiB, used=5.62GiB
GlobalReserve, single: total=512.00MiB, used=0.00B
# sudo btrfs scrub status /home
scrub status for 135e8b6e-c5e5-4d2c-8c1a-62093b41ed1c
scrub started at Mon May 7 02:07:52 2018 and finished after 00:07:23
total bytes scrubbed: 162.16GiB with 0 errors
For the kernel version, I had the same problem with v4.16.1 so this is
not a regression of the rc.
I use btrbk to automate my snapshots and backups. I only have the
problem with one of my subvolumes while I do the automatic snapshots
with many subvolumes on this drive. Also, all the snapshots of this
subvolume seem affected.
Did anyone encounter a similar issue or can help me investigate it?
I started looking at the kernel code for the send ioctl but was too lazy
to go through the call hierarchy after 3 function calls. I also found a
page on the btrfs wiki how to debug btrfs using user mode linux but I do
not know if it still works considering it is using 2.6.
Thank you.
--
Nicolas Porcel
[-- Attachment #2: dmesg.log --]
[-- Type: text/plain, Size: 71101 bytes --]
[ 0.000000] Linux version 4.17.0-rc2_3+ (nicolas@nicolas-desktop) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Tue May 8 01:14:47 CEST 2018
[ 0.000000] Command line: BOOT_IMAGE=/void/boot/vmlinuz-4.17.0-rc2_3+ root=UUID=135e8b6e-c5e5-4d2c-8c1a-62093b41ed1c ro rootflags=subvol=void loglevel=4 slub_debug=P page_poison=1 crashkernel=168M
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x00000000dd27ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd280000-0x00000000dd3c0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dd3c1000-0x00000000dd4bbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd4bc000-0x00000000dd88efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000dd88f000-0x00000000de3e8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000de3e9000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fdf00000-0x00000000fdffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7A34/B350 TOMAHAWK (MS-7A34), BIOS 1.90 09/19/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41f380 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 0000DF000000 mask FFFFFF000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000420000000 aka 16896M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1a96b2000, 0x1a96b2fff] PGTABLE
[ 0.000000] BRK [0x1a96b3000, 0x1a96b3fff] PGTABLE
[ 0.000000] BRK [0x1a96b4000, 0x1a96b4fff] PGTABLE
[ 0.000000] BRK [0x1a96b5000, 0x1a96b5fff] PGTABLE
[ 0.000000] BRK [0x1a96b6000, 0x1a96b6fff] PGTABLE
[ 0.000000] BRK [0x1a96b7000, 0x1a96b7fff] PGTABLE
[ 0.000000] BRK [0x1a96b8000, 0x1a96b8fff] PGTABLE
[ 0.000000] BRK [0x1a96b9000, 0x1a96b9fff] PGTABLE
[ 0.000000] BRK [0x1a96ba000, 0x1a96bafff] PGTABLE
[ 0.000000] BRK [0x1a96bb000, 0x1a96bbfff] PGTABLE
[ 0.000000] BRK [0x1a96bc000, 0x1a96bcfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35ce7000-0x36e6afff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD4BC090 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD4C1FA0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20180313/tbfadt-624)
[ 0.000000] ACPI: DSDT 0x00000000DD4BC1C0 005DDA (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DD878E00 000040
[ 0.000000] ACPI: APIC 0x00000000DD4C20B8 0000DE (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD4C2198 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000DD4C21E0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000DD4C2280 008C4C (v02 AMD AMD ALIB 00000002 MSFT 04000000)
[ 0.000000] ACPI: CRAT 0x00000000DD4CAED0 000F50 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000DD4CBE20 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000DD4CBE50 0017B7 (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000DD4CD608 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000DD4CD648 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD4CD680 000024 (v01 AMDFCH FCHZP 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000DD4CD6A8 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: IVRS 0x00000000DD4CD6F0 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000DD4CD7C0 0000F8 (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000DD4CD8B8 001664 (v01 AMD CPMCMN 00000001 INTL 20120913)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] Setting APIC routing to physical flat.
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41f37b000-0x41f37ffff]
[ 0.000000] Reserving 168MB of memory at 688MB for crashkernel (System RAM: 16336MB)
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: Using PIT calibration value
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x00000000dd27ffff]
[ 0.000000] node 0: [mem 0x00000000dd3c1000-0x00000000dd4bbfff]
[ 0.000000] node 0: [mem 0x00000000de3e9000-0x00000000deffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041f37ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
[ 0.000000] On node 0 totalpages: 4182062
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14133 pages used for memmap
[ 0.000000] DMA32 zone: 904466 pages, LIFO batch:31
[ 0.000000] Normal zone: 51150 pages used for memmap
[ 0.000000] Normal zone: 3273600 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 100 pages
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] system APIC only can use physical flat
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 16 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd280000-0xdd3c0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd4bc000-0xdd88efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd88f000-0xde3e8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfdf00000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea00000-0xfea0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfea10000-0xfeb7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec2ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec30000-0xfec30fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec31000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedcffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd0000-0xfedd3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd4000-0xfedd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfedd6000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0xc5/0x750 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1
[ 0.000000] percpu: Embedded 44 pages/cpu @ (ptrval) s141848 r8192 d30184 u262144
[ 0.000000] pcpu-alloc: s141848 r8192 d30184 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4116694
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/void/boot/vmlinuz-4.17.0-rc2_3+ root=UUID=135e8b6e-c5e5-4d2c-8c1a-62093b41ed1c ro rootflags=subvol=void loglevel=4 slub_debug=P page_poison=1 crashkernel=168M
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16183896K/16728248K available (10252K kernel code, 1121K rwdata, 2340K rodata, 1856K init, 916K bss, 544352K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[ 0.000000] ftrace: allocating 31432 entries in 123 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1096, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20180313
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.002000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.007000] tsc: Fast TSC calibration failed
[ 0.009000] tsc: PIT calibration matches HPET. 1 loops
[ 0.009000] tsc: Detected 3399.618 MHz processor
[ 0.009000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3100e592838, max_idle_ns: 440795256374 ns
[ 0.009000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6799.23 BogoMIPS (lpj=3399618)
[ 0.009000] pid_max: default: 32768 minimum: 301
[ 0.009000] Security Framework initialized
[ 0.009000] Yama: becoming mindful.
[ 0.010054] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010216] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.010229] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010235] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.010444] CPU: Physical Processor ID: 0
[ 0.010444] CPU: Processor Core ID: 0
[ 0.010450] mce: CPU supports 23 MCE banks
[ 0.010466] LVT offset 1 assigned for vector 0xf9
[ 0.010578] LVT offset 2 assigned for vector 0xf4
[ 0.010588] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.010589] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.010590] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.015087] Freeing SMP alternatives memory: 24K
[ 0.017000] smpboot: CPU0: AMD Ryzen 7 1700X Eight-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 0.021010] Performance Events: Fam17h core perfctr, AMD PMU driver.
[ 0.021013] ... version: 0
[ 0.021014] ... bit width: 48
[ 0.021014] ... generic registers: 6
[ 0.021015] ... value mask: 0000ffffffffffff
[ 0.021015] ... max period: 00007fffffffffff
[ 0.021016] ... fixed-purpose events: 0
[ 0.021016] ... event mask: 000000000000003f
[ 0.023005] Hierarchical SRCU implementation.
[ 0.027217] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.029004] smp: Bringing up secondary CPUs ...
[ 0.037014] x86: Booting SMP configuration:
[ 0.037016] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
[ 0.164025] smp: Brought up 1 node, 16 CPUs
[ 0.164025] smpboot: Max logical packages: 1
[ 0.164025] smpboot: Total of 16 processors activated (108787.77 BogoMIPS)
[ 0.166001] devtmpfs: initialized
[ 0.166073] x86/mm: Memory block size: 128MB
[ 0.168028] PM: Registering ACPI NVS region [mem 0xdd4bc000-0xdd88efff] (4009984 bytes)
[ 0.168519] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.168519] futex hash table entries: 4096 (order: 6, 262144 bytes)
[ 0.168519] pinctrl core: initialized pinctrl subsystem
[ 0.168519] NET: Registered protocol family 16
[ 0.169080] audit: initializing netlink subsys (disabled)
[ 0.169090] audit: type=2000 audit(1525777007.169:1): state=initialized audit_enabled=0 res=1
[ 0.170006] cpuidle: using governor ladder
[ 0.170021] cpuidle: using governor menu
[ 0.170049] ACPI: bus type PCI registered
[ 0.170050] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.170179] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.170182] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.170191] PCI: Using configuration type 1 for base access
[ 0.171553] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.171553] mtrr: probably your BIOS does not setup all CPUs.
[ 0.171553] mtrr: corrected configuration.
[ 0.172546] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.172546] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.173103] ACPI: Added _OSI(Module Device)
[ 0.173104] ACPI: Added _OSI(Processor Device)
[ 0.173104] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.173105] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.173107] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.179631] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.206369] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.217853] ACPI: Interpreter enabled
[ 0.217872] ACPI: (supports S0 S3 S4 S5)
[ 0.217873] ACPI: Using IOAPIC for interrupt routing
[ 0.218143] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.218831] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.238890] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.238896] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.239645] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.239669] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.240864] PCI host bridge to bus 0000:00
[ 0.240867] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.240869] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.240871] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.240873] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.240875] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.240877] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.240879] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[ 0.240881] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[ 0.240883] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.240890] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[ 0.241085] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[ 0.241294] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.241472] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[ 0.241523] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 0.241711] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[ 0.241891] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[ 0.242059] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[ 0.242108] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 0.242301] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[ 0.242487] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[ 0.242653] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[ 0.242671] pci 0000:00:07.1: enabling Extended Tags
[ 0.242697] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 0.242882] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.243050] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[ 0.243069] pci 0000:00:08.1: enabling Extended Tags
[ 0.243101] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.243315] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.243647] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.243980] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[ 0.244137] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[ 0.244292] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[ 0.244451] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[ 0.244605] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[ 0.244759] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[ 0.244912] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[ 0.245068] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[ 0.245325] pci 0000:03:00.0: [1022:43bb] type 00 class 0x0c0330
[ 0.245346] pci 0000:03:00.0: reg 0x10: [mem 0xfe8a0000-0xfe8a7fff 64bit]
[ 0.245428] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.245512] pci 0000:03:00.1: [1022:43b7] type 00 class 0x010601
[ 0.245555] pci 0000:03:00.1: reg 0x24: [mem 0xfe880000-0xfe89ffff]
[ 0.245562] pci 0000:03:00.1: reg 0x30: [mem 0xfe800000-0xfe87ffff pref]
[ 0.245608] pci 0000:03:00.1: PME# supported from D3hot D3cold
[ 0.245673] pci 0000:03:00.2: [1022:43b2] type 01 class 0x060400
[ 0.245751] pci 0000:03:00.2: PME# supported from D3hot D3cold
[ 0.245851] pci 0000:00:01.3: PCI bridge to [bus 03-22]
[ 0.245853] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
[ 0.245855] pci 0000:00:01.3: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.245962] pci 0000:04:00.0: [1022:43b4] type 01 class 0x060400
[ 0.246059] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.246141] pci 0000:04:01.0: [1022:43b4] type 01 class 0x060400
[ 0.246239] pci 0000:04:01.0: PME# supported from D3hot D3cold
[ 0.246321] pci 0000:04:04.0: [1022:43b4] type 01 class 0x060400
[ 0.246417] pci 0000:04:04.0: PME# supported from D3hot D3cold
[ 0.246506] pci 0000:03:00.2: PCI bridge to [bus 04-22]
[ 0.246510] pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
[ 0.246512] pci 0000:03:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.246578] pci 0000:1f:00.0: [1b21:1080] type 01 class 0x060400
[ 0.246775] pci 0000:1f:00.0: supports D1 D2
[ 0.246776] pci 0000:1f:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249019] pci 0000:04:00.0: PCI bridge to [bus 1f-20]
[ 0.249171] pci 0000:1f:00.0: PCI bridge to [bus 20]
[ 0.249264] pci 0000:21:00.0: [10ec:8168] type 00 class 0x020000
[ 0.249305] pci 0000:21:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.249339] pci 0000:21:00.0: reg 0x18: [mem 0xfe704000-0xfe704fff 64bit]
[ 0.249361] pci 0000:21:00.0: reg 0x20: [mem 0xfe700000-0xfe703fff 64bit]
[ 0.249505] pci 0000:21:00.0: supports D1 D2
[ 0.249506] pci 0000:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.249661] pci 0000:04:01.0: PCI bridge to [bus 21]
[ 0.249665] pci 0000:04:01.0: bridge window [io 0xf000-0xffff]
[ 0.249668] pci 0000:04:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.249712] pci 0000:04:04.0: PCI bridge to [bus 22]
[ 0.249805] pci 0000:23:00.0: [1022:1470] type 01 class 0x060400
[ 0.249823] pci 0000:23:00.0: reg 0x10: [mem 0xfe600000-0xfe603fff]
[ 0.249894] pci 0000:23:00.0: PME# supported from D0 D3hot D3cold
[ 0.249987] pci 0000:00:03.1: PCI bridge to [bus 23-25]
[ 0.249990] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.249991] pci 0000:00:03.1: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.249994] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.250043] pci 0000:24:00.0: [1022:1471] type 01 class 0x060400
[ 0.250124] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[ 0.250200] pci 0000:23:00.0: PCI bridge to [bus 24-25]
[ 0.250204] pci 0000:23:00.0: bridge window [io 0xe000-0xefff]
[ 0.250206] pci 0000:23:00.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.250210] pci 0000:23:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.250253] pci 0000:25:00.0: [1002:687f] type 00 class 0x030000
[ 0.250276] pci 0000:25:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.250285] pci 0000:25:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.250291] pci 0000:25:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.250298] pci 0000:25:00.0: reg 0x24: [mem 0xfe500000-0xfe57ffff]
[ 0.250304] pci 0000:25:00.0: reg 0x30: [mem 0xfe580000-0xfe59ffff pref]
[ 0.250368] pci 0000:25:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.250439] pci 0000:25:00.1: [1002:aaf8] type 00 class 0x040300
[ 0.250455] pci 0000:25:00.1: reg 0x10: [mem 0xfe5a0000-0xfe5a3fff]
[ 0.250536] pci 0000:25:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.250622] pci 0000:24:00.0: PCI bridge to [bus 25]
[ 0.250626] pci 0000:24:00.0: bridge window [io 0xe000-0xefff]
[ 0.250628] pci 0000:24:00.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.250632] pci 0000:24:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.250725] pci 0000:26:00.0: [1022:145a] type 00 class 0x130000
[ 0.250754] pci 0000:26:00.0: enabling Extended Tags
[ 0.250833] pci 0000:26:00.2: [1022:1456] type 00 class 0x108000
[ 0.250848] pci 0000:26:00.2: reg 0x18: [mem 0xfe300000-0xfe3fffff]
[ 0.250858] pci 0000:26:00.2: reg 0x24: [mem 0xfe400000-0xfe401fff]
[ 0.250864] pci 0000:26:00.2: enabling Extended Tags
[ 0.250963] pci 0000:26:00.3: [1022:145c] type 00 class 0x0c0330
[ 0.250974] pci 0000:26:00.3: reg 0x10: [mem 0xfe200000-0xfe2fffff 64bit]
[ 0.250992] pci 0000:26:00.3: enabling Extended Tags
[ 0.251025] pci 0000:26:00.3: PME# supported from D0 D3hot D3cold
[ 0.251101] pci 0000:00:07.1: PCI bridge to [bus 26]
[ 0.251104] pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
[ 0.251206] pci 0000:27:00.0: [1022:1455] type 00 class 0x130000
[ 0.251238] pci 0000:27:00.0: enabling Extended Tags
[ 0.251328] pci 0000:27:00.2: [1022:7901] type 00 class 0x010601
[ 0.251354] pci 0000:27:00.2: reg 0x24: [mem 0xfe908000-0xfe908fff]
[ 0.251361] pci 0000:27:00.2: enabling Extended Tags
[ 0.251396] pci 0000:27:00.2: PME# supported from D3hot D3cold
[ 0.251475] pci 0000:27:00.3: [1022:1457] type 00 class 0x040300
[ 0.251485] pci 0000:27:00.3: reg 0x10: [mem 0xfe900000-0xfe907fff]
[ 0.251507] pci 0000:27:00.3: enabling Extended Tags
[ 0.251541] pci 0000:27:00.3: PME# supported from D0 D3hot D3cold
[ 0.251621] pci 0000:00:08.1: PCI bridge to [bus 27]
[ 0.251624] pci 0000:00:08.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.252789] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.252931] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.253065] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.253216] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.253356] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.253479] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.253598] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.253717] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.254865] pci 0000:25:00.0: vgaarb: setting as boot VGA device
[ 0.254865] pci 0000:25:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.254865] pci 0000:25:00.0: vgaarb: bridge control possible
[ 0.254865] vgaarb: loaded
[ 0.254865] pps_core: LinuxPPS API ver. 1 registered
[ 0.254865] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.254865] PTP clock support registered
[ 0.254865] EDAC MC: Ver: 3.0.0
[ 0.255031] PCI: Using ACPI for IRQ routing
[ 0.257643] PCI: pci_cache_line_size set to 64 bytes
[ 0.257701] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[ 0.257703] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[ 0.257704] e820: reserve RAM buffer [mem 0xdd280000-0xdfffffff]
[ 0.257705] e820: reserve RAM buffer [mem 0xdd4bc000-0xdfffffff]
[ 0.257706] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 0.257707] e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
[ 0.258037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.258039] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.260031] clocksource: Switched to clocksource tsc-early
[ 0.267281] VFS: Disk quotas dquot_6.6.0
[ 0.267296] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.267367] pnp: PnP ACPI init
[ 0.267522] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.267526] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.267655] system 00:01: [mem 0xfeb80000-0xfebfffff] could not be reserved
[ 0.267659] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.267931] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.268360] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.268364] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.268367] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.268371] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.268375] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.269014] pnp 00:04: [dma 0 disabled]
[ 0.269206] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.269741] pnp 00:05: [dma 0 disabled]
[ 0.269789] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.270288] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.270292] system 00:06: [io 0x040b] has been reserved
[ 0.270295] system 00:06: [io 0x04d6] has been reserved
[ 0.270298] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.270302] system 00:06: [io 0x0c14] has been reserved
[ 0.270305] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.270308] system 00:06: [io 0x0c52] has been reserved
[ 0.270311] system 00:06: [io 0x0c6c] has been reserved
[ 0.270314] system 00:06: [io 0x0c6f] has been reserved
[ 0.270317] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.270320] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.270324] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.270327] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.270330] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.270333] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.270336] system 00:06: [io 0x0b00-0x0b0f] has been reserved
[ 0.270339] system 00:06: [io 0x0b20-0x0b3f] has been reserved
[ 0.270342] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.270345] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.270348] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.270351] system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.270354] system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.270357] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.270360] system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.270363] system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.270366] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.270370] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.271374] pnp: PnP ACPI: found 7 devices
[ 0.277701] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.277765] pci 0000:1f:00.0: PCI bridge to [bus 20]
[ 0.277785] pci 0000:04:00.0: PCI bridge to [bus 1f-20]
[ 0.277794] pci 0000:04:01.0: PCI bridge to [bus 21]
[ 0.277796] pci 0000:04:01.0: bridge window [io 0xf000-0xffff]
[ 0.277800] pci 0000:04:01.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.277806] pci 0000:04:04.0: PCI bridge to [bus 22]
[ 0.277814] pci 0000:03:00.2: PCI bridge to [bus 04-22]
[ 0.277816] pci 0000:03:00.2: bridge window [io 0xf000-0xffff]
[ 0.277819] pci 0000:03:00.2: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.277825] pci 0000:00:01.3: PCI bridge to [bus 03-22]
[ 0.277826] pci 0000:00:01.3: bridge window [io 0xf000-0xffff]
[ 0.277828] pci 0000:00:01.3: bridge window [mem 0xfe700000-0xfe8fffff]
[ 0.277832] pci 0000:24:00.0: PCI bridge to [bus 25]
[ 0.277834] pci 0000:24:00.0: bridge window [io 0xe000-0xefff]
[ 0.277837] pci 0000:24:00.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.277839] pci 0000:24:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.277843] pci 0000:23:00.0: PCI bridge to [bus 24-25]
[ 0.277844] pci 0000:23:00.0: bridge window [io 0xe000-0xefff]
[ 0.277848] pci 0000:23:00.0: bridge window [mem 0xfe500000-0xfe5fffff]
[ 0.277850] pci 0000:23:00.0: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.277854] pci 0000:00:03.1: PCI bridge to [bus 23-25]
[ 0.277855] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
[ 0.277857] pci 0000:00:03.1: bridge window [mem 0xfe500000-0xfe6fffff]
[ 0.277858] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.277861] pci 0000:00:07.1: PCI bridge to [bus 26]
[ 0.277863] pci 0000:00:07.1: bridge window [mem 0xfe200000-0xfe4fffff]
[ 0.277867] pci 0000:00:08.1: PCI bridge to [bus 27]
[ 0.277869] pci 0000:00:08.1: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.277873] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.277874] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.277875] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.277876] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.277877] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.277878] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.277879] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[ 0.277879] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[ 0.277880] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
[ 0.277881] pci_bus 0000:03: resource 1 [mem 0xfe700000-0xfe8fffff]
[ 0.277882] pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
[ 0.277883] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.277884] pci_bus 0000:21: resource 0 [io 0xf000-0xffff]
[ 0.277885] pci_bus 0000:21: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.277886] pci_bus 0000:23: resource 0 [io 0xe000-0xefff]
[ 0.277887] pci_bus 0000:23: resource 1 [mem 0xfe500000-0xfe6fffff]
[ 0.277888] pci_bus 0000:23: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.277889] pci_bus 0000:24: resource 0 [io 0xe000-0xefff]
[ 0.277889] pci_bus 0000:24: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.277890] pci_bus 0000:24: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.277891] pci_bus 0000:25: resource 0 [io 0xe000-0xefff]
[ 0.277892] pci_bus 0000:25: resource 1 [mem 0xfe500000-0xfe5fffff]
[ 0.277893] pci_bus 0000:25: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 0.277894] pci_bus 0000:26: resource 1 [mem 0xfe200000-0xfe4fffff]
[ 0.277895] pci_bus 0000:27: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.278082] NET: Registered protocol family 2
[ 0.278243] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.278282] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.278426] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.278535] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.278582] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.278618] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.278721] NET: Registered protocol family 1
[ 0.278921] pci 0000:25:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.278927] pci 0000:25:00.1: Linked as a consumer to 0000:25:00.0
[ 0.279184] PCI: CLS 64 bytes, default 64
[ 0.279225] Unpacking initramfs...
[ 0.513388] Freeing initrd memory: 17936K
[ 0.513403] AMD-Vi: IOMMU performance counters supported
[ 0.513560] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.513561] pci 0000:00:00.2: PCI INT A: not connected
[ 0.513961] iommu: Adding device 0000:00:01.0 to group 0
[ 0.514185] iommu: Adding device 0000:00:01.3 to group 1
[ 0.514344] iommu: Adding device 0000:00:02.0 to group 2
[ 0.514515] iommu: Adding device 0000:00:03.0 to group 3
[ 0.514676] iommu: Adding device 0000:00:03.1 to group 4
[ 0.514846] iommu: Adding device 0000:00:04.0 to group 5
[ 0.515010] iommu: Adding device 0000:00:07.0 to group 6
[ 0.515031] iommu: Adding device 0000:00:07.1 to group 6
[ 0.515203] iommu: Adding device 0000:00:08.0 to group 7
[ 0.515226] iommu: Adding device 0000:00:08.1 to group 7
[ 0.515391] iommu: Adding device 0000:00:14.0 to group 8
[ 0.515412] iommu: Adding device 0000:00:14.3 to group 8
[ 0.515605] iommu: Adding device 0000:00:18.0 to group 9
[ 0.515623] iommu: Adding device 0000:00:18.1 to group 9
[ 0.515641] iommu: Adding device 0000:00:18.2 to group 9
[ 0.515662] iommu: Adding device 0000:00:18.3 to group 9
[ 0.515680] iommu: Adding device 0000:00:18.4 to group 9
[ 0.515698] iommu: Adding device 0000:00:18.5 to group 9
[ 0.515719] iommu: Adding device 0000:00:18.6 to group 9
[ 0.515737] iommu: Adding device 0000:00:18.7 to group 9
[ 0.515910] iommu: Adding device 0000:03:00.0 to group 10
[ 0.515936] iommu: Adding device 0000:03:00.1 to group 10
[ 0.515962] iommu: Adding device 0000:03:00.2 to group 10
[ 0.515981] iommu: Adding device 0000:04:00.0 to group 10
[ 0.515998] iommu: Adding device 0000:04:01.0 to group 10
[ 0.516014] iommu: Adding device 0000:04:04.0 to group 10
[ 0.516032] iommu: Adding device 0000:1f:00.0 to group 10
[ 0.516057] iommu: Adding device 0000:21:00.0 to group 10
[ 0.516300] iommu: Adding device 0000:23:00.0 to group 11
[ 0.516452] iommu: Adding device 0000:24:00.0 to group 12
[ 0.516668] iommu: Adding device 0000:25:00.0 to group 13
[ 0.516751] iommu: Using direct mapping for device 0000:25:00.0
[ 0.516879] iommu: Adding device 0000:25:00.1 to group 14
[ 0.516893] iommu: Adding device 0000:26:00.0 to group 6
[ 0.516906] iommu: Adding device 0000:26:00.2 to group 6
[ 0.516922] iommu: Adding device 0000:26:00.3 to group 6
[ 0.516937] iommu: Adding device 0000:27:00.0 to group 7
[ 0.516949] iommu: Adding device 0000:27:00.2 to group 7
[ 0.516962] iommu: Adding device 0000:27:00.3 to group 7
[ 0.517187] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 0.517187] AMD-Vi: Extended features (0xf77ef22294ada):
[ 0.517188] PPR NX GT IA GA PC GA_vAPIC
[ 0.517191] AMD-Vi: Interrupt remapping enabled
[ 0.517191] AMD-Vi: virtual APIC enabled
[ 0.517302] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.524348] amd_uncore: AMD NB counters detected
[ 0.524352] amd_uncore: AMD LLC counters detected
[ 0.524585] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 0.524648] Scanning for low memory corruption every 60 seconds
[ 0.525471] Initialise system trusted keyrings
[ 0.525539] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.527548] zbud: loaded
[ 0.527964] pstore: using deflate compression
[ 0.528439] Key type asymmetric registered
[ 0.528440] Asymmetric key parser 'x509' registered
[ 0.528471] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.528510] io scheduler noop registered
[ 0.528511] io scheduler deadline registered
[ 0.528560] io scheduler cfq registered (default)
[ 0.528561] io scheduler mq-deadline registered
[ 0.528562] io scheduler kyber registered
[ 0.530479] pcieport 0000:00:01.3: AER enabled with IRQ 26
[ 0.530503] pcieport 0000:00:03.1: AER enabled with IRQ 27
[ 0.530518] pcieport 0000:00:01.3: Signaling PME with IRQ 26
[ 0.530528] pcieport 0000:00:03.1: Signaling PME with IRQ 27
[ 0.530538] iommu ivhd0: AMD-Vi: Event logged [
[ 0.530544] iommu ivhd0: INVALID_DEVICE_REQUEST device=00:00.0 address=0xfffffffdf8000000 flags=0x0a00]
[ 0.530545] pcieport 0000:00:07.1: Signaling PME with IRQ 28
[ 0.530577] pcieport 0000:00:08.1: Signaling PME with IRQ 30
[ 0.530608] vesafb: mode is 3840x2160x16, linelength=7680, pages=0
[ 0.530608] vesafb: scrolling: redraw
[ 0.530609] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.530618] vesafb: framebuffer at 0xe0000000, mapped to 0x (ptrval), using 16256k, total 16256k
[ 0.568702] Console: switching to colour frame buffer device 480x135
[ 0.606656] fb0: VESA VGA frame buffer device
[ 0.615069] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.636150] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.638141] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 0.638158] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.638159] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.638173] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.638174] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.638189] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 0.638189] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.638225] i8042: PNP: No PS/2 controller found.
[ 0.638279] mousedev: PS/2 mouse device common for all mice
[ 0.638332] rtc_cmos 00:02: RTC can wake from S4
[ 0.638577] rtc_cmos 00:02: registered as rtc0
[ 0.638593] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.638719] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.639031] NET: Registered protocol family 10
[ 0.641526] Segment Routing with IPv6
[ 0.641541] NET: Registered protocol family 17
[ 0.641578] Key type dns_resolver registered
[ 0.643930] microcode: CPU0: patch_level=0x08001129
[ 0.643933] microcode: CPU1: patch_level=0x08001129
[ 0.643936] microcode: CPU2: patch_level=0x08001129
[ 0.643939] microcode: CPU3: patch_level=0x08001129
[ 0.643943] microcode: CPU4: patch_level=0x08001129
[ 0.643947] microcode: CPU5: patch_level=0x08001129
[ 0.643951] microcode: CPU6: patch_level=0x08001129
[ 0.643955] microcode: CPU7: patch_level=0x08001129
[ 0.643960] microcode: CPU8: patch_level=0x08001129
[ 0.643965] microcode: CPU9: patch_level=0x08001129
[ 0.643970] microcode: CPU10: patch_level=0x08001129
[ 0.643975] microcode: CPU11: patch_level=0x08001129
[ 0.643979] microcode: CPU12: patch_level=0x08001129
[ 0.643984] microcode: CPU13: patch_level=0x08001129
[ 0.643988] microcode: CPU14: patch_level=0x08001129
[ 0.643993] microcode: CPU15: patch_level=0x08001129
[ 0.644026] microcode: Microcode Update Driver: v2.2.
[ 0.644036] sched_clock: Marking stable (644021604, 0)->(828686166, -184664562)
[ 0.644133] registered taskstats version 1
[ 0.644134] Loading compiled-in X.509 certificates
[ 0.644193] zswap: loaded using pool lzo/zbud
[ 0.644971] rtc_cmos 00:02: setting system clock to 2018-05-08 10:56:48 UTC (1525777008)
[ 1.029153] Freeing unused kernel memory: 1856K
[ 1.029154] Write protecting the kernel read-only data: 16384k
[ 1.030486] Freeing unused kernel memory: 2024K
[ 1.033355] Freeing unused kernel memory: 1756K
[ 1.033486] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.070959] dracut: dracut-047
[ 1.122779] systemd-udevd[306]: starting version 3.2.5
[ 1.122880] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.122899] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.122913] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.123492] udevd[307]: starting eudev-3.2.5
[ 1.128225] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.136935] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.139369] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.147112] ACPI: bus type USB registered
[ 1.147160] usbcore: registered new interface driver usbfs
[ 1.147177] usbcore: registered new interface driver hub
[ 1.147247] usbcore: registered new device driver usb
[ 1.148132] Linux agpgart interface v0.103
[ 1.148430] SCSI subsystem initialized
[ 1.154020] QUIRK: Enable AMD PLL fix
[ 1.154042] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.154048] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[ 1.154061] libata version 3.00 loaded.
[ 1.186903] [drm] amdgpu kernel modesetting enabled.
[ 1.187550] checking generic (e0000000 fe0000) vs hw (e0000000 10000000)
[ 1.187551] fb: switching to amdgpudrmfb from VESA VGA
[ 1.187582] Console: switching to colour dummy device 80x25
[ 1.187895] [drm] initializing kernel modesetting (VEGA10 0x1002:0x687F 0x1002:0x0B36 0xC3).
[ 1.187903] [drm] register mmio base: 0xFE500000
[ 1.187904] [drm] register mmio size: 524288
[ 1.187911] [drm] probing gen 2 caps for device 1022:1471 = 700d03/e
[ 1.187913] [drm] probing mlw for device 1022:1471 = 700d03
[ 1.187915] [drm] add ip block number 0 <soc15_common>
[ 1.187915] [drm] add ip block number 1 <gmc_v9_0>
[ 1.187916] [drm] add ip block number 2 <vega10_ih>
[ 1.187917] [drm] add ip block number 3 <psp>
[ 1.187917] [drm] add ip block number 4 <powerplay>
[ 1.187918] [drm] add ip block number 5 <dm>
[ 1.187919] [drm] add ip block number 6 <gfx_v9_0>
[ 1.187919] [drm] add ip block number 7 <sdma_v4_0>
[ 1.187920] [drm] add ip block number 8 <uvd_v7_0>
[ 1.187921] [drm] add ip block number 9 <vce_v4_0>
[ 1.187955] [drm] UVD is enabled in VM mode
[ 1.187955] [drm] UVD ENC is enabled in VM mode
[ 1.187955] [drm] VCE enabled in VM mode
[ 1.187967] amdgpu 0000:25:00.0: Invalid PCI ROM header signature: expecting 0xaa55, got 0xffff
[ 1.187981] ATOM BIOS: 113-D0500300-102
[ 1.188025] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 1.188036] amdgpu 0000:25:00.0: VRAM: 8176M 0x000000F400000000 - 0x000000F5FEFFFFFF (8176M used)
[ 1.188037] amdgpu 0000:25:00.0: GTT: 512M 0x000000F600000000 - 0x000000F61FFFFFFF
[ 1.188040] [drm] Detected VRAM RAM=8176M, BAR=256M
[ 1.188041] [drm] RAM width 2048bits HBM
[ 1.188119] [TTM] Zone kernel: Available graphics memory: 8136722 kiB
[ 1.188119] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.188120] [TTM] Initializing pool allocator
[ 1.188134] [TTM] Initializing DMA pool allocator
[ 1.188172] [drm] amdgpu: 8176M of VRAM memory ready
[ 1.188173] [drm] amdgpu: 8176M of GTT memory ready.
[ 1.188187] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 1.188292] [drm] PCIE GART of 512M enabled (table at 0x000000F400800000).
[ 1.189394] [drm] use_doorbell being set to: [true]
[ 1.189435] [drm] use_doorbell being set to: [true]
[ 1.189531] [drm] Found UVD firmware Version: 1.87 Family ID: 17
[ 1.189534] [drm] PSP loading UVD firmware
[ 1.189996] [drm] Found VCE firmware Version: 53.45 Binary ID: 4
[ 1.190005] [drm] PSP loading VCE firmware
[ 1.209421] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x48000418
[ 1.209811] hub 1-0:1.0: USB hub found
[ 1.209831] hub 1-0:1.0: 10 ports detected
[ 1.210314] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.210319] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 1.210324] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 1.210360] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.210536] hub 2-0:1.0: USB hub found
[ 1.210548] hub 2-0:1.0: 4 ports detected
[ 1.210797] ahci 0000:03:00.1: version 3.0
[ 1.210945] xhci_hcd 0000:26:00.3: xHCI Host Controller
[ 1.210951] xhci_hcd 0000:26:00.3: new USB bus registered, assigned bus number 3
[ 1.210990] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[ 1.211030] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 1.211033] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 1.211076] xhci_hcd 0000:26:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x00000418
[ 1.211433] hub 3-0:1.0: USB hub found
[ 1.211456] hub 3-0:1.0: 4 ports detected
[ 1.211800] xhci_hcd 0000:26:00.3: xHCI Host Controller
[ 1.211804] xhci_hcd 0000:26:00.3: new USB bus registered, assigned bus number 4
[ 1.211809] xhci_hcd 0000:26:00.3: Host supports USB 3.0 SuperSpeed
[ 1.211846] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.212131] hub 4-0:1.0: USB hub found
[ 1.212150] hub 4-0:1.0: 4 ports detected
[ 1.212426] scsi host0: ahci
[ 1.212626] scsi host1: ahci
[ 1.212790] scsi host2: ahci
[ 1.213032] scsi host3: ahci
[ 1.213176] scsi host4: ahci
[ 1.213329] scsi host5: ahci
[ 1.213497] scsi host6: ahci
[ 1.213676] scsi host7: ahci
[ 1.213763] ata1: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880100 irq 44
[ 1.213765] ata2: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880180 irq 44
[ 1.213765] ata3: DUMMY
[ 1.213766] ata4: DUMMY
[ 1.213767] ata5: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880300 irq 44
[ 1.213768] ata6: SATA max UDMA/133 abar m131072@0xfe880000 port 0xfe880380 irq 44
[ 1.213769] ata7: DUMMY
[ 1.213769] ata8: DUMMY
[ 1.213962] ahci 0000:27:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 1.213964] ahci 0000:27:00.2: flags: 64bit ncq sntf ilck led clo only pmp fbs pio
[ 1.214169] scsi host8: ahci
[ 1.214243] ata9: SATA max UDMA/133 abar m4096@0xfe908000 port 0xfe908100 irq 47
[ 1.525462] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.530025] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 1.565433] [drm] Display Core initialized with v3.1.38!
[ 1.568160] tsc: Refined TSC clocksource calibration: 3400.001 MHz
[ 1.568170] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x31024f56bf0, max_idle_ns: 440795227444 ns
[ 1.568198] clocksource: Switched to clocksource tsc
[ 1.590865] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.590866] [drm] Driver supports precise vblank timestamp query.
[ 1.592021] usb 1-9: new low-speed USB device number 2 using xhci_hcd
[ 1.614030] [drm] UVD and UVD ENC initialized successfully.
[ 1.672024] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.672590] ata1.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133
[ 1.672592] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.673034] ata1.00: configured for UDMA/133
[ 1.673191] scsi 0:0:0:0: Direct-Access ATA WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5
[ 1.714438] [drm] VCE initialized successfully.
[ 1.717635] [drm] fb mappable at 0xE0F00000
[ 1.717636] [drm] vram apper at 0xE0000000
[ 1.717636] [drm] size 33177600
[ 1.717636] [drm] fb depth is 24
[ 1.717637] [drm] pitch is 15360
[ 1.717793] fbcon: amdgpudrmfb (fb0) is primary device
[ 1.769422] Console: switching to colour frame buffer device 480x135
[ 1.795816] amdgpu 0000:25:00.0: fb0: amdgpudrmfb frame buffer device
[ 1.801157] amdgpu 0000:25:00.0: ring 0(gfx) uses VM inv eng 4 on hub 0
[ 1.801159] amdgpu 0000:25:00.0: ring 1(comp_1.0.0) uses VM inv eng 5 on hub 0
[ 1.801160] amdgpu 0000:25:00.0: ring 2(comp_1.1.0) uses VM inv eng 6 on hub 0
[ 1.801161] amdgpu 0000:25:00.0: ring 3(comp_1.2.0) uses VM inv eng 7 on hub 0
[ 1.801162] amdgpu 0000:25:00.0: ring 4(comp_1.3.0) uses VM inv eng 8 on hub 0
[ 1.801164] amdgpu 0000:25:00.0: ring 5(comp_1.0.1) uses VM inv eng 9 on hub 0
[ 1.801165] amdgpu 0000:25:00.0: ring 6(comp_1.1.1) uses VM inv eng 10 on hub 0
[ 1.801166] amdgpu 0000:25:00.0: ring 7(comp_1.2.1) uses VM inv eng 11 on hub 0
[ 1.801167] amdgpu 0000:25:00.0: ring 8(comp_1.3.1) uses VM inv eng 12 on hub 0
[ 1.801168] amdgpu 0000:25:00.0: ring 9(kiq_2.1.0) uses VM inv eng 13 on hub 0
[ 1.801170] amdgpu 0000:25:00.0: ring 10(sdma0) uses VM inv eng 4 on hub 1
[ 1.801171] amdgpu 0000:25:00.0: ring 11(sdma1) uses VM inv eng 5 on hub 1
[ 1.801172] amdgpu 0000:25:00.0: ring 12(uvd) uses VM inv eng 6 on hub 1
[ 1.801173] amdgpu 0000:25:00.0: ring 13(uvd_enc0) uses VM inv eng 7 on hub 1
[ 1.801174] amdgpu 0000:25:00.0: ring 14(uvd_enc1) uses VM inv eng 8 on hub 1
[ 1.801176] amdgpu 0000:25:00.0: ring 15(vce0) uses VM inv eng 9 on hub 1
[ 1.801177] amdgpu 0000:25:00.0: ring 16(vce1) uses VM inv eng 10 on hub 1
[ 1.801178] amdgpu 0000:25:00.0: ring 17(vce2) uses VM inv eng 11 on hub 1
[ 1.801220] [drm] ECC is not present.
[ 1.801918] [drm] Initialized amdgpu 3.25.0 20150101 for 0000:25:00.0 on minor 0
[ 1.803889] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.808410] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 1.808413] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.808429] sd 0:0:0:0: [sda] Write Protect is off
[ 1.808431] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.808453] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.898793] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.909531] usbcore: registered new interface driver usbhid
[ 1.909532] usbhid: USB HID core driver
[ 1.909933] usbcore: registered new interface driver usbmouse
[ 1.910622] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-9/1-9:1.0/0003:046D:C05A.0001/input/input0
[ 1.910710] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:03:00.0-9/input0
[ 1.966038] usb 3-4: new full-speed USB device number 3 using xhci_hcd
[ 1.984131] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.172965] hub 3-4:1.0: USB hub found
[ 2.176898] hub 3-4:1.0: 3 ports detected
[ 2.369574] sda: sda1 sda2 sda3
[ 2.370111] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.456053] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.456459] ata5.00: supports DRM functions and may not be fully accessible
[ 2.464602] ata5.00: disabling queued TRIM support
[ 2.464605] ata5.00: ATA-9: Crucial_CT256MX100SSD1, MU01, max UDMA/133
[ 2.464606] ata5.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.478019] usb 3-4.1: new full-speed USB device number 4 using xhci_hcd
[ 2.481997] ata5.00: supports DRM functions and may not be fully accessible
[ 2.490183] ata5.00: disabling queued TRIM support
[ 2.507142] ata5.00: configured for UDMA/133
[ 2.507517] scsi 4:0:0:0: Direct-Access ATA Crucial_CT256MX1 MU01 PQ: 0 ANSI: 5
[ 2.507732] ata5.00: Enabling discard_zeroes_data
[ 2.507819] sd 4:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.507820] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 2.507834] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.507836] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.507859] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.508024] ata5.00: Enabling discard_zeroes_data
[ 2.508330] sdb: sdb1
[ 2.508461] ata5.00: Enabling discard_zeroes_data
[ 2.508584] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.512941] random: fast init done
[ 2.536002] raid6: sse2x1 gen() 7687 MB/s
[ 2.553004] raid6: sse2x1 xor() 8083 MB/s
[ 2.570002] raid6: sse2x2 gen() 16972 MB/s
[ 2.587005] raid6: sse2x2 xor() 10910 MB/s
[ 2.604003] raid6: sse2x4 gen() 16875 MB/s
[ 2.621001] raid6: sse2x4 xor() 10052 MB/s
[ 2.638002] raid6: avx2x1 gen() 19050 MB/s
[ 2.655002] raid6: avx2x1 xor() 14527 MB/s
[ 2.672003] raid6: avx2x2 gen() 24136 MB/s
[ 2.689002] raid6: avx2x2 xor() 15613 MB/s
[ 2.706001] raid6: avx2x4 gen() 25160 MB/s
[ 2.723006] raid6: avx2x4 xor() 14253 MB/s
[ 2.723006] raid6: using algorithm avx2x4 gen() 25160 MB/s
[ 2.723007] raid6: .... xor() 14253 MB/s, rmw enabled
[ 2.723007] raid6: using avx2x2 recovery algorithm
[ 2.725293] xor: automatically using best checksumming function avx
[ 2.741807] Btrfs loaded, crc32c=crc32c-intel
[ 2.742163] BTRFS: device label ssd devid 1 transid 986115 /dev/sdb1
[ 2.816114] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.904633] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:26:00.3/usb3/3-4/3-4.1/3-4.1:1.0/0003:413C:2010.0002/input/input1
[ 2.956570] hid-generic 0003:413C:2010.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:26:00.3-4.1/input0
[ 2.984737] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:07.1/0000:26:00.3/usb3/3-4/3-4.1/3-4.1:1.1/0003:413C:2010.0003/input/input2
[ 3.036110] hid-generic 0003:413C:2010.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:26:00.3-4.1/input1
[ 3.036831] usbcore: registered new interface driver usbkbd
[ 3.037996] BTRFS: device label backup devid 1 transid 24289 /dev/sda2
[ 3.051192] BTRFS info (device sdb1): disk space caching is enabled
[ 3.051193] BTRFS info (device sdb1): has skinny extents
[ 3.120094] BTRFS info (device sdb1): enabling ssd optimizations
[ 3.158413] dracut: Mounted root filesystem /dev/sdb1
[ 3.186012] dracut: Switching root
[ 3.297219] fuse init (API version 7.26)
[ 3.307324] loop: module loaded
[ 3.311568] tun: Universal TUN/TAP device driver, 1.6
[ 3.316619] PPP generic driver version 2.4.2
[ 3.331462] device-mapper: uevent: version 1.0.3
[ 3.331559] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[ 3.334977] VFIO - User Level meta-driver version: 0.3
[ 3.364624] Bluetooth: Core ver 2.22
[ 3.364662] NET: Registered protocol family 31
[ 3.364662] Bluetooth: HCI device and connection manager initialized
[ 3.364667] Bluetooth: HCI socket layer initialized
[ 3.364672] Bluetooth: L2CAP socket layer initialized
[ 3.364678] Bluetooth: SCO socket layer initialized
[ 3.385882] NET: Registered protocol family 40
[ 3.421098] nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
[ 3.427434] udevd[648]: starting version 3.2.5
[ 3.431499] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.431545] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.431552] random: udevd: uninitialized urandom read (16 bytes read)
[ 3.446974] udevd[649]: starting eudev-3.2.5
[ 3.469517] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.470960] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 3.470975] ACPI: Power Button [PWRB]
[ 3.471071] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 3.471091] ACPI: Power Button [PWRF]
[ 3.500381] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.505533] r8169 0000:21:00.0 eth0: RTL8168h/8111h at 0x (ptrval), 30:9c:23:1e:4c:31, XID 14100800 IRQ 48
[ 3.505536] r8169 0000:21:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.512489] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 3.513202] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.513205] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 3.514473] parport_pc 00:04: reported by Plug and Play ACPI
[ 3.514602] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 3.518070] ccp 0000:26:00.2: ccp enabled
[ 3.518098] ccp 0000:26:00.2: psp initialization failed
[ 3.518099] ccp 0000:26:00.2: enabled
[ 3.521936] cryptd: max_cpu_qlen set to 1000
[ 3.523147] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[ 3.523328] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[ 3.523339] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[ 3.524487] r8169 0000:21:00.0 enp33s0: renamed from eth0
[ 3.524789] media: Linux media interface: v0.10
[ 3.535785] ppdev: user-space parallel port driver
[ 3.541550] AVX2 version of gcm_enc/dec engaged.
[ 3.541551] AES CTR mode by8 optimization enabled
[ 3.543077] Linux video capture interface: v2.00
[ 3.553760] snd_hda_intel 0000:25:00.1: Handle vga_switcheroo audio client
[ 3.566646] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:23:00.0/0000:24:00.0/0000:25:00.1/sound/card1/input6
[ 3.566958] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:23:00.0/0000:24:00.0/0000:25:00.1/sound/card1/input7
[ 3.567348] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:23:00.0/0000:24:00.0/0000:25:00.1/sound/card1/input8
[ 3.567738] input: HD-Audio Generic HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:23:00.0/0000:24:00.0/0000:25:00.1/sound/card1/input9
[ 3.568077] input: HD-Audio Generic HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:23:00.0/0000:24:00.0/0000:25:00.1/sound/card1/input10
[ 3.568291] input: HD-Audio Generic HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:23:00.0/0000:24:00.0/0000:25:00.1/sound/card1/input11
[ 3.586977] random: crng init done
[ 3.589005] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.589022] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.589023] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.589026] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 3.589027] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 3.589030] snd_hda_codec_realtek hdaudioC2D0: Front Mic=0x19
[ 3.589031] snd_hda_codec_realtek hdaudioC2D0: Rear Mic=0x18
[ 3.589032] snd_hda_codec_realtek hdaudioC2D0: Line=0x1a
[ 3.606796] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input12
[ 3.606985] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input13
[ 3.607178] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input14
[ 3.607331] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input15
[ 3.607508] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input16
[ 3.607673] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input17
[ 3.607806] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input18
[ 3.608037] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:27:00.3/sound/card2/input19
[ 3.623167] kvm: Nested Virtualization enabled
[ 3.623182] kvm: Nested Paging enabled
[ 3.623182] SVM: Virtual VMLOAD VMSAVE supported
[ 3.623182] SVM: Virtual GIF supported
[ 3.627097] MCE: In-kernel MCE decoding enabled.
[ 3.631193] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.631195] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.649958] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.649960] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.676814] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.676815] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.704819] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.704820] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.729752] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.729753] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.758598] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.758599] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 3.765256] usb 3-1: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
[ 3.765258] usb 3-1: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
[ 3.765466] usbcore: registered new interface driver snd-usb-audio
[ 3.765488] uvcvideo: Found UVC 1.00 device <unnamed> (046d:08c5)
[ 3.864998] uvcvideo 3-1:1.0: Entity type for entity Extension 4 was not initialized!
[ 3.865007] uvcvideo 3-1:1.0: Entity type for entity Extension 8 was not initialized!
[ 3.865008] uvcvideo 3-1:1.0: Entity type for entity Extension 10 was not initialized!
[ 3.865010] uvcvideo 3-1:1.0: Entity type for entity Extension 3 was not initialized!
[ 3.865011] uvcvideo 3-1:1.0: Entity type for entity Processing 2 was not initialized!
[ 3.865012] uvcvideo 3-1:1.0: Entity type for entity Camera 1 was not initialized!
[ 3.865089] input: UVC Camera (046d:08c5) as /devices/pci0000:00/0000:00:07.1/0000:26:00.3/usb3/3-1/3-1:1.0/input/input20
[ 3.865174] usbcore: registered new interface driver uvcvideo
[ 3.865175] USB Video Class driver (1.1.1)
[ 4.113877] BTRFS info (device sdb1): use lzo compression, level 0
[ 4.113879] BTRFS info (device sdb1): disk space caching is enabled
[ 4.317360] BTRFS info (device sdb1): disk space caching is enabled
[ 4.338887] BTRFS info (device sda2): use lzo compression, level 0
[ 4.338888] BTRFS info (device sda2): disk space caching is enabled
[ 4.338889] BTRFS info (device sda2): has skinny extents
[ 8.767957] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 8.859385] udevd[898]: starting version 3.2.5
[ 8.884671] 8021q: 802.1Q VLAN Support v1.8
[ 8.912523] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.914161] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.914836] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.914838] cfg80211: failed to load regulatory.db
[ 9.024845] r8169 0000:21:00.0 enp33s0: link down
[ 9.024847] r8169 0000:21:00.0 enp33s0: link down
[ 9.024938] IPv6: ADDRCONF(NETDEV_UP): enp33s0: link is not ready
[ 9.109614] udevd[898]: starting eudev-3.2.5
[ 12.196430] r8169 0000:21:00.0 enp33s0: link up
[ 12.196436] IPv6: ADDRCONF(NETDEV_CHANGE): enp33s0: link becomes ready
[11299.445768] usb 3-4: USB disconnect, device number 3
[11299.445770] usb 3-4.1: USB disconnect, device number 4
[11329.030660] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[11329.348400] hub 1-8:1.0: USB hub found
[11329.352367] hub 1-8:1.0: 3 ports detected
[11329.650598] usb 1-8.1: new full-speed USB device number 4 using xhci_hcd
[11329.877854] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:413C:2010.0004/input/input21
[11329.929831] hid-generic 0003:413C:2010.0004: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:03:00.0-8.1/input0
[11329.957825] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:413C:2010.0005/input/input22
[11330.009756] hid-generic 0003:413C:2010.0005: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:03:00.0-8.1/input1
[11568.252698] usb 1-8: USB disconnect, device number 3
[11568.252701] usb 1-8.1: USB disconnect, device number 4
[11599.278400] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[11599.595772] hub 1-8:1.0: USB hub found
[11599.599734] hub 1-8:1.0: 3 ports detected
[11599.899757] usb 1-8.1: new full-speed USB device number 6 using xhci_hcd
[11600.127575] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.0/0003:413C:2010.0006/input/input23
[11600.179637] hid-generic 0003:413C:2010.0006: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:03:00.0-8.1/input0
[11600.208457] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-8/1-8.1/1-8.1:1.1/0003:413C:2010.0007/input/input24
[11600.260545] hid-generic 0003:413C:2010.0007: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:03:00.0-8.1/input1
[12208.920342] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
[18473.718449] usb 3-1: reset high-speed USB device number 2 using xhci_hcd
next reply other threads:[~2018-05-08 17:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-08 17:44 Nicolas Porcel [this message]
2018-05-08 18:16 ` send ioctl failed with -2 Noah Massey
2018-05-08 19:40 ` Nicolas Porcel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180508174412.GA3058@nicolas-desktop \
--to=nicolasporcel06@gmail.com \
--cc=linux-btrfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.