From: Yann E. MORIN <yann.morin.1998@free.fr>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 2/2] clamav: add patch to fix build failure caused by lack of libcurl
Date: Sun, 13 May 2018 22:48:59 +0200 [thread overview]
Message-ID: <20180513204859.GO22130@scaer> (raw)
In-Reply-To: <20180507212031.31337-2-thomas.petazzoni@bootlin.com>
Thomas, All,
On 2018-05-07 23:20 +0200, Thomas Petazzoni spake thusly:
> When json-c is enabled but libcurl is disabled, clamav tries to build
> the clamsubmit program, which fails with:
>
> CC clamsubmit.o
> clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
> #include <curl/curl.h>
>
> This is due to an incorrect curl-config detection logic, leading to
> /bin/curl-config being present making the configure script believe
> that curl is available, even when --without-libcurl is explicitly
> passed.
>
> This commit adds a patch, submitted upstream, which fixes this
> problem.
>
> Fixes:
>
> http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I had a bit of a trouble understanding what was going on, but now I see
and the fix indeed does make sense.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Regards,
Yann E. MORIN.
> ---
> ...zation-libs-curl.m4-fix-curl-config-detec.patch | 75 ++++++++++++++++++++++
> package/clamav/clamav.mk | 2 +
> 2 files changed, 77 insertions(+)
> create mode 100644 package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
>
> diff --git a/package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch b/package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
> new file mode 100644
> index 0000000000..1d26b099b9
> --- /dev/null
> +++ b/package/clamav/0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
> @@ -0,0 +1,75 @@
> +From 6b6ff53b5931c162be13504a1efc53fc5212f9d1 Mon Sep 17 00:00:00 2001
> +From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> +Date: Mon, 7 May 2018 22:57:34 +0200
> +Subject: [PATCH] m4/reorganization/libs/curl.m4: fix curl-config detection
> + logic
> +
> +The current logic in curl.m4 doesn't behave properly when
> +--without-libcurl is passed to the ./configure script.
> +
> +Indeed, in this case what happens is that:
> +
> + (1) Since --without-libcurl is passed, LIBCURL_HOME is set to nothing
> +
> + (2) find_curl is set to "no"
> +
> + (3) Due to find_curl being "no", LIBCURL_HOME is not set to
> + /usr/local and remains empty
> +
> + (4) We test if $LIBCURL_HOME/bin/curl_config exists, which is
> + equivalent to testing if /bin/curl-config exists. So curl.m4 is
> + looking at /bin/curl-config, which is irrelevant in a
> + cross-compilation context: it is not because the build machine
> + has libcurl installed that it is available for the target.
> +
> + Due to this mistake, it sets have_curl="yes"
> +
> +Due to this, the ./configure script assumes it can build the
> +clamsubmit program, which fails at build time because curl/curl.h
> +doesn't exist.
> +
> +To fix this, this commit rewrites the curl-config detection logic with
> +a simpler loop. If find_curl=yes, it means we have to find libcurl
> +ourselves, so we iterate over /usr/local and /usr, and check if a
> +bin/curl-config binary is available there. If so, we use this path as
> +LIBCURL_HOME and set have_curl="yes".
> +
> +This preserves the existing behavior, while fixing the situation where
> +--without-libcurl is passed, but /bin/curl-config exists.
> +
> +Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
> +Upstream-status: https://github.com/Cisco-Talos/clamav-devel/pull/87
> +---
> + m4/reorganization/libs/curl.m4 | 15 +++++----------
> + 1 file changed, 5 insertions(+), 10 deletions(-)
> +
> +diff --git a/m4/reorganization/libs/curl.m4 b/m4/reorganization/libs/curl.m4
> +index 2a5966ee7..b6a9c2137 100644
> +--- a/m4/reorganization/libs/curl.m4
> ++++ b/m4/reorganization/libs/curl.m4
> +@@ -19,17 +19,12 @@ fi
> + [find_curl="yes"])
> +
> + if test "X$find_curl" = "Xyes"; then
> +- LIBCURL_HOME=/usr/local
> +-fi
> +-if test -f "$LIBCURL_HOME/bin/curl-config"; then
> +- have_curl="yes"
> +-else
> +- if test "X$find_curl" = "Xyes"; then
> +- LIBCURL_HOME=/usr
> +- if test -f "$LIBCURL_HOME/bin/curl-config"; then
> +- have_curl="yes"
> ++ for p in /usr/local /usr ; do
> ++ if test -f "${p}/bin/curl-config"; then
> ++ LIBCURL_HOME=$p
> ++ have_curl="yes"
> + fi
> +- fi
> ++ done
> + fi
> +
> + if test "X$have_curl" = "Xyes"; then
> +--
> +2.14.3
> +
> diff --git a/package/clamav/clamav.mk b/package/clamav/clamav.mk
> index 2711ca2a86..c0138a8944 100644
> --- a/package/clamav/clamav.mk
> +++ b/package/clamav/clamav.mk
> @@ -16,6 +16,8 @@ CLAMAV_DEPENDENCIES = \
> openssl \
> zlib \
> $(TARGET_NLS_DEPENDENCIES)
> +# 0003-m4-reorganization-libs-curl.m4-fix-curl-config-detec.patch
> +CLAMAV_AUTORECONF = YES
>
> # mmap cannot be detected when cross-compiling, needed for mempool support
> CLAMAV_CONF_ENV = \
> --
> 2.14.3
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
next prev parent reply other threads:[~2018-05-13 20:48 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-07 21:20 [Buildroot] [PATCH 1/2] clamav: reformat patches as Git-formatted patches Thomas Petazzoni
2018-05-07 21:20 ` [Buildroot] [PATCH 2/2] clamav: add patch to fix build failure caused by lack of libcurl Thomas Petazzoni
2018-05-13 20:48 ` Yann E. MORIN [this message]
2018-05-13 20:44 ` [Buildroot] [PATCH 1/2] clamav: reformat patches as Git-formatted patches Yann E. MORIN
2018-05-13 21:00 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180513204859.GO22130@scaer \
--to=yann.morin.1998@free.fr \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.