[PATCH 04/27] drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc: correct spaces around operators

[John Whitmore <johnfwhitmore@gmail.com>]

Coding style edit to clear the checkpatch.pl errors of the type:
ERROR: spaces required around that...

Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
 .../staging/rtl8192u/ieee80211/rtl819x_HTProc.c    | 122 ++++++++++-----------
 1 file changed, 61 insertions(+), 61 deletions(-)

diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index d4ab8481ee30..f66f181e24f2 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -60,8 +60,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
 	//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p,  offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
 	//printk("===>ieee:%p,\n", ieee);
 	// ShortGI support
-	pHTInfo->bRegShortGI20MHz= 1;
-	pHTInfo->bRegShortGI40MHz= 1;
+	pHTInfo->bRegShortGI20MHz = 1;
+	pHTInfo->bRegShortGI40MHz = 1;
 
 	// 40MHz channel support
 	pHTInfo->bRegBW40MHz = 1;
@@ -137,12 +137,12 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString)
 
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString);
 
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz)?"YES": "NO");
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC)?"YES": "NO");
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize)?"3839": "7935");
-	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk)?"YES": "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth) ? "20MHz" : "20/40MHz");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz) ? "YES" : "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz) ? "YES" : "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC) ? "YES" : "NO");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize) ? "3839" : "7935");
+	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk) ? "YES" : "NO");
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMax AMPDU Factor = %d\n", pCapELE->MaxRxAMPDUFactor);
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
 	IEEE80211_DEBUG(IEEE80211_DL_HT,  "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
@@ -190,7 +190,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
 			IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
 			break;
 	}
-	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
+	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth) ? "20Mhz" : "40Mhz");
 
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
 	switch (pHTInfoEle->OptMode) {
@@ -266,8 +266,8 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee,	u8	nMcsRate)
 	u8	is40MHz;
 	u8	isShortGI;
 
-	is40MHz  =  (IsHTHalfNmode40Bandwidth(ieee))?1:0;
-	isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz))? 1:0;
+	is40MHz  =  (IsHTHalfNmode40Bandwidth(ieee)) ? 1 : 0;
+	isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz)) ? 1 : 0;
 
 	return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
 }
@@ -277,10 +277,10 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
 {
 	PRT_HIGH_THROUGHPUT	pHTInfo = ieee->pHTInfo;
 
-	u8	is40MHz = (pHTInfo->bCurBW40MHz)?1:0;
-	u8	isShortGI = (pHTInfo->bCurBW40MHz)?
-						((pHTInfo->bCurShortGI40MHz)?1:0):
-						((pHTInfo->bCurShortGI20MHz)?1:0);
+	u8	is40MHz = (pHTInfo->bCurBW40MHz) ? 1 : 0;
+	u8	isShortGI = (pHTInfo->bCurBW40MHz) ?
+						((pHTInfo->bCurShortGI40MHz) ? 1 : 0) :
+						((pHTInfo->bCurShortGI20MHz) ? 1 : 0);
 	return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
 }
 
@@ -308,7 +308,7 @@ u16  TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
 			isShortGI = 0;
 
 		      // nDataRate = nDataRate - 12;
-		} else if(nDataRate >=0x20  && nDataRate <= 0x2f) { //(27, 44)
+		} else if(nDataRate >= 0x20  && nDataRate <= 0x2f) { //(27, 44)
 			is40MHz = 1;
 			isShortGI = 0;
 
@@ -334,17 +334,17 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
 {
 	bool			retValue = false;
 	struct ieee80211_network *net = &ieee->current_network;
-	if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
-		     (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
-		     (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
-		     (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
-		     (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+	if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
+		     (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+		     (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+		     (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+		     (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
 		     (net->ralink_cap_exist))
 		retValue = true;
-	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
-		    (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
-		    (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
-		    (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
+	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
+		    (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+		    (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+		    (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) ||
 		    (net->broadcom_cap_exist))
 		  retValue = true;
 	else if(net->bssht.bdRT2RTAggregation)
@@ -370,21 +370,21 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
 		pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
 	else if(net->broadcom_cap_exist)
 		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
-	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
-			(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
-			(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
-			(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0))
+	else if((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
+			(memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+			(memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+			(memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0))
 		pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
-	else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
-			(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
-			(memcmp(net->bssid, PCI_RALINK, 3)==0) ||
-			(memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
-			(memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+	else if((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
+			(memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+			(memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+			(memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+			(memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
 			 net->ralink_cap_exist)
 		pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
 	else if(net->atheros_cap_exist)
 		pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
-	else if(memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
+	else if(memcmp(net->bssid, CISCO_BROADCOM, 3) == 0)
 		pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
 	else
 		pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
@@ -423,7 +423,7 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
 
 #ifdef TODO
 	// Apply for 819u only
-#if (HAL_CODE_BASE==RTL8192)
+#if (HAL_CODE_BASE == RTL8192)
 
 #if (DEV_BUS_TYPE == USB_INTERFACE)
 	// Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
@@ -498,9 +498,9 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
 static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
 {
 	u8	retValue = 0;
-	if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
-	   (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
-	   (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
+	if((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
+	   (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+	   (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
 		retValue = 1;
 
 	return retValue;
@@ -550,7 +550,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	if(ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
 		pCapELE->ChlWidth = 0;
 	else
-		pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
+		pCapELE->ChlWidth = (pHT->bRegBW40MHz ? 1 : 0);
 
 //	pCapELE->ChlWidth		= (pHT->bRegBW40MHz?1:0);
 	pCapELE->MimoPwrSave		= pHT->SelfMimoPs;
@@ -562,8 +562,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	pCapELE->TxSTBC			= 1;
 	pCapELE->RxSTBC			= 0;
 	pCapELE->DelayBA		= 0;	// Do not support now!!
-	pCapELE->MaxAMSDUSize	= (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
-	pCapELE->DssCCk			= ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
+	pCapELE->MaxAMSDUSize	= (MAX_RECEIVE_BUFFER_SIZE >= 7935) ? 1 : 0;
+	pCapELE->DssCCk			= ((pHT->bRegBW40MHz) ? (pHT->bRegSuppCCK ? 1 : 0) : 0);
 	pCapELE->PSMP			= 0; // Do not support now!!
 	pCapELE->LSigTxopProtect	= 0; // Do not support now!!
 
@@ -595,7 +595,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
 	// For RTL819X, if pairwisekey = wep/tkip, ap is ralink, we support only MCS0~7.
 	if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)) {
 		int i;
-		for(i = 1; i< 16; i++)
+		for(i = 1; i < 16; i++)
 			pCapELE->MCS[i] = 0;
 	}
 
@@ -645,9 +645,9 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
 	memset(posHTInfo, 0, *len);
 	if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) { //ap mode is not currently supported
 		pHTInfoEle->ControlChl			= ieee->current_network.channel;
-		pHTInfoEle->ExtChlOffset			= ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
-											(ieee->current_network.channel<=6)?
-												HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
+		pHTInfoEle->ExtChlOffset			= ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
+											(ieee->current_network.channel <= 6) ?
+												HT_EXTCHNL_OFFSET_UPPER : HT_EXTCHNL_OFFSET_LOWER);
 		pHTInfoEle->RecommemdedTxWidth	= pHT->bRegBW40MHz;
 		pHTInfoEle->RIFS					= 0;
 		pHTInfoEle->PSMPAccessOnly		= 0;
@@ -770,7 +770,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
 			//legacy rate routine handled at selectedrate
 
 			//no MCS rate
-			for(i=0;i<=15;i++) {
+			for(i = 0; i <= 15; i++) {
 				pOperateMCS[i] = 0;
 			}
 			break;
@@ -782,9 +782,9 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
 
 			//HT part
 			// TODO: may be different if we have different number of antenna
-			pOperateMCS[0] &=RATE_ADPT_1SS_MASK;	//support MCS 0~7
-			pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
-			pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
+			pOperateMCS[0] &= RATE_ADPT_1SS_MASK;	//support MCS 0~7
+			pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
+			pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
 			break;
 
 	//should never reach here
@@ -826,7 +826,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
 		IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
 		return false;
 	}
-	for(i=0; i<16; i++)
+	for(i = 0; i < 16; i++)
 		availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
 
 	for(i = 0; i < 16; i++) {
@@ -866,10 +866,10 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
 			  u8 *pOperateMCS)
 {
 
-	u8 i=0;
+	u8 i = 0;
 
 	// filter out operational rate set not supported by AP, the length of it is 16
-	for(i=0;i<=15;i++){
+	for(i = 0; i <= 15; i++){
 		pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
 	}
 
@@ -888,7 +888,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
 	// For RTL819X, we support only MCS0~15.
 	// And also, we do not know how to use MCS32 now.
 	//
-	for(i=2; i<=15; i++)
+	for(i = 2; i <= 15; i++)
 		pOperateMCS[i] = 0;
 
 	return true;
@@ -965,7 +965,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
 	//
 	pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
 
-	nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize==0)?3839:7935;
+	nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
 
 	if(pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize)
 		pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
@@ -1149,7 +1149,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
 	memset(pBssHT->bdHTInfoBuf, 0, sizeof(pBssHT->bdHTInfoBuf));
 	pBssHT->bdHTInfoLen = 0;
 
-	pBssHT->bdHTSpecVer= HT_SPEC_VER_IEEE;
+	pBssHT->bdHTSpecVer = HT_SPEC_VER_IEEE;
 
 	pBssHT->bdRT2RTAggregation = false;
 	pBssHT->bdRT2RTLongSlotTime = false;
@@ -1302,11 +1302,11 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH	Bandwidt
 		return;
 	}
 	//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
-	if(Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))) {
+	if(Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))) {
 			// Handle Illegal extension channel offset!!
-		if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
+		if(ieee->current_network.channel < 2 && Offset == HT_EXTCHNL_OFFSET_LOWER)
 			Offset = HT_EXTCHNL_OFFSET_NO_EXT;
-		if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
+		if(Offset == HT_EXTCHNL_OFFSET_UPPER || Offset == HT_EXTCHNL_OFFSET_LOWER) {
 			pHTInfo->bCurBW40MHz = true;
 			pHTInfo->CurSTAExtChnlOffset = Offset;
 		} else {
@@ -1336,9 +1336,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee)
 	IEEE80211_DEBUG(IEEE80211_DL_HT, "======>%s()\n", __func__);
 
 	if(pHTInfo->bCurBW40MHz) {
-		if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_UPPER)
+		if(pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_UPPER)
 			ieee->set_chan(ieee->dev, ieee->current_network.channel+2);
-		else if(pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_LOWER)
+		else if(pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_LOWER)
 			ieee->set_chan(ieee->dev, ieee->current_network.channel-2);
 		else
 			ieee->set_chan(ieee->dev, ieee->current_network.channel);
-- 
2.16.3

_______________________________________________
devel mailing list
devel@linuxdriverproject.org
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel