All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Lendacky <thomas.lendacky@amd.com>
To: netdev@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Subject: [PATCH net-next 05/12] amd-xgbe: Add ethtool support to retrieve SFP module info
Date: Mon, 21 May 2018 16:59:02 -0500	[thread overview]
Message-ID: <20180521215902.8135.25029.stgit@tlendack-t1.amdoffice.net> (raw)
In-Reply-To: <20180521215818.8135.83100.stgit@tlendack-t1.amdoffice.net>

Add support to get SFP module information using ethtool.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c |   18 +++
 drivers/net/ethernet/amd/xgbe/xgbe-mdio.c    |   21 ++++
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c  |  137 ++++++++++++++++++++++++++
 drivers/net/ethernet/amd/xgbe/xgbe.h         |   13 ++
 4 files changed, 189 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
index ff397bb..57394b77 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c
@@ -626,6 +626,22 @@ static int xgbe_get_ts_info(struct net_device *netdev,
 	return 0;
 }
 
+static int xgbe_get_module_info(struct net_device *netdev,
+				struct ethtool_modinfo *modinfo)
+{
+	struct xgbe_prv_data *pdata = netdev_priv(netdev);
+
+	return pdata->phy_if.module_info(pdata, modinfo);
+}
+
+static int xgbe_get_module_eeprom(struct net_device *netdev,
+				  struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct xgbe_prv_data *pdata = netdev_priv(netdev);
+
+	return pdata->phy_if.module_eeprom(pdata, eeprom, data);
+}
+
 static const struct ethtool_ops xgbe_ethtool_ops = {
 	.get_drvinfo = xgbe_get_drvinfo,
 	.get_msglevel = xgbe_get_msglevel,
@@ -646,6 +662,8 @@ static int xgbe_get_ts_info(struct net_device *netdev,
 	.get_ts_info = xgbe_get_ts_info,
 	.get_link_ksettings = xgbe_get_link_ksettings,
 	.set_link_ksettings = xgbe_set_link_ksettings,
+	.get_module_info = xgbe_get_module_info,
+	.get_module_eeprom = xgbe_get_module_eeprom,
 };
 
 const struct ethtool_ops *xgbe_get_ethtool_ops(void)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
index 1b45cd7..9c39c72 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-mdio.c
@@ -126,6 +126,24 @@
 #include "xgbe.h"
 #include "xgbe-common.h"
 
+static int xgbe_phy_module_eeprom(struct xgbe_prv_data *pdata,
+				  struct ethtool_eeprom *eeprom, u8 *data)
+{
+	if (!pdata->phy_if.phy_impl.module_eeprom)
+		return -ENXIO;
+
+	return pdata->phy_if.phy_impl.module_eeprom(pdata, eeprom, data);
+}
+
+static int xgbe_phy_module_info(struct xgbe_prv_data *pdata,
+				struct ethtool_modinfo *modinfo)
+{
+	if (!pdata->phy_if.phy_impl.module_info)
+		return -ENXIO;
+
+	return pdata->phy_if.phy_impl.module_info(pdata, modinfo);
+}
+
 static void xgbe_an37_clear_interrupts(struct xgbe_prv_data *pdata)
 {
 	int reg;
@@ -1639,4 +1657,7 @@ void xgbe_init_function_ptrs_phy(struct xgbe_phy_if *phy_if)
 	phy_if->phy_valid_speed = xgbe_phy_valid_speed;
 
 	phy_if->an_isr          = xgbe_an_combined_isr;
+
+	phy_if->module_info     = xgbe_phy_module_info;
+	phy_if->module_eeprom   = xgbe_phy_module_eeprom;
 }
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index cb15caf..141bb13 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -119,6 +119,7 @@
 #include <linux/kmod.h>
 #include <linux/mdio.h>
 #include <linux/phy.h>
+#include <linux/ethtool.h>
 
 #include "xgbe.h"
 #include "xgbe-common.h"
@@ -270,6 +271,15 @@ struct xgbe_sfp_eeprom {
 	u8 vendor[32];
 };
 
+#define XGBE_SFP_DIAGS_SUPPORTED(_x)			\
+	((_x)->extd[XGBE_SFP_EXTD_SFF_8472] &&		\
+	 !((_x)->extd[XGBE_SFP_EXTD_DIAG] & XGBE_SFP_EXTD_DIAG_ADDR_CHANGE))
+
+#define XGBE_SFP_EEPROM_BASE_LEN	256
+#define XGBE_SFP_EEPROM_DIAG_LEN	256
+#define XGBE_SFP_EEPROM_MAX		(XGBE_SFP_EEPROM_BASE_LEN +	\
+					 XGBE_SFP_EEPROM_DIAG_LEN)
+
 #define XGBE_BEL_FUSE_VENDOR	"BEL-FUSE        "
 #define XGBE_BEL_FUSE_PARTNO	"1GBT-SFP06      "
 
@@ -1301,6 +1311,130 @@ static void xgbe_phy_sfp_detect(struct xgbe_prv_data *pdata)
 	xgbe_phy_put_comm_ownership(pdata);
 }
 
+static int xgbe_phy_module_eeprom(struct xgbe_prv_data *pdata,
+				  struct ethtool_eeprom *eeprom, u8 *data)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+	u8 eeprom_addr, eeprom_data[XGBE_SFP_EEPROM_MAX];
+	struct xgbe_sfp_eeprom *sfp_eeprom;
+	unsigned int i, j, rem;
+	int ret;
+
+	rem = eeprom->len;
+
+	if (!eeprom->len) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if ((eeprom->offset + eeprom->len) > XGBE_SFP_EEPROM_MAX) {
+		ret = -EINVAL;
+		goto done;
+	}
+
+	if (phy_data->port_mode != XGBE_PORT_MODE_SFP) {
+		ret = -ENXIO;
+		goto done;
+	}
+
+	if (!netif_running(pdata->netdev)) {
+		ret = -EIO;
+		goto done;
+	}
+
+	if (phy_data->sfp_mod_absent) {
+		ret = -EIO;
+		goto done;
+	}
+
+	ret = xgbe_phy_get_comm_ownership(pdata);
+	if (ret) {
+		ret = -EIO;
+		goto done;
+	}
+
+	ret = xgbe_phy_sfp_get_mux(pdata);
+	if (ret) {
+		netdev_err(pdata->netdev, "I2C error setting SFP MUX\n");
+		ret = -EIO;
+		goto put_own;
+	}
+
+	/* Read the SFP serial ID eeprom */
+	eeprom_addr = 0;
+	ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_SERIAL_ID_ADDRESS,
+				&eeprom_addr, sizeof(eeprom_addr),
+				eeprom_data, XGBE_SFP_EEPROM_BASE_LEN);
+	if (ret) {
+		netdev_err(pdata->netdev,
+			   "I2C error reading SFP EEPROM\n");
+		ret = -EIO;
+		goto put_mux;
+	}
+
+	sfp_eeprom = (struct xgbe_sfp_eeprom *)eeprom_data;
+
+	if (XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom)) {
+		/* Read the SFP diagnostic eeprom */
+		eeprom_addr = 0;
+		ret = xgbe_phy_i2c_read(pdata, XGBE_SFP_DIAG_INFO_ADDRESS,
+					&eeprom_addr, sizeof(eeprom_addr),
+					eeprom_data + XGBE_SFP_EEPROM_BASE_LEN,
+					XGBE_SFP_EEPROM_DIAG_LEN);
+		if (ret) {
+			netdev_err(pdata->netdev,
+				   "I2C error reading SFP DIAGS\n");
+			ret = -EIO;
+			goto put_mux;
+		}
+	}
+
+	for (i = 0, j = eeprom->offset; i < eeprom->len; i++, j++) {
+		if ((j >= XGBE_SFP_EEPROM_BASE_LEN) &&
+		    !XGBE_SFP_DIAGS_SUPPORTED(sfp_eeprom))
+			break;
+
+		data[i] = eeprom_data[j];
+		rem--;
+	}
+
+put_mux:
+	xgbe_phy_sfp_put_mux(pdata);
+
+put_own:
+	xgbe_phy_put_comm_ownership(pdata);
+
+done:
+	eeprom->len -= rem;
+
+	return ret;
+}
+
+static int xgbe_phy_module_info(struct xgbe_prv_data *pdata,
+				struct ethtool_modinfo *modinfo)
+{
+	struct xgbe_phy_data *phy_data = pdata->phy_data;
+
+	if (phy_data->port_mode != XGBE_PORT_MODE_SFP)
+		return -ENXIO;
+
+	if (!netif_running(pdata->netdev))
+		return -EIO;
+
+	if (phy_data->sfp_mod_absent)
+		return -EIO;
+
+	if (XGBE_SFP_DIAGS_SUPPORTED(&phy_data->sfp_eeprom)) {
+		modinfo->type = ETH_MODULE_SFF_8472;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+	} else {
+		modinfo->type = ETH_MODULE_SFF_8079;
+		modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+	}
+
+	return 0;
+}
+
 static void xgbe_phy_phydev_flowctrl(struct xgbe_prv_data *pdata)
 {
 	struct ethtool_link_ksettings *lks = &pdata->phy.lks;
@@ -3196,4 +3330,7 @@ void xgbe_init_function_ptrs_phy_v2(struct xgbe_phy_if *phy_if)
 
 	phy_impl->kr_training_pre	= xgbe_phy_kr_training_pre;
 	phy_impl->kr_training_post	= xgbe_phy_kr_training_post;
+
+	phy_impl->module_info		= xgbe_phy_module_info;
+	phy_impl->module_eeprom		= xgbe_phy_module_eeprom;
 }
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h
index 54e43ad3..f0f455b 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe.h
+++ b/drivers/net/ethernet/amd/xgbe/xgbe.h
@@ -835,6 +835,7 @@ struct xgbe_hw_if {
  *   Optional routines:
  *     an_pre, an_post
  *     kr_training_pre, kr_training_post
+ *     module_info, module_eeprom
  */
 struct xgbe_phy_impl_if {
 	/* Perform Setup/teardown actions */
@@ -883,6 +884,12 @@ struct xgbe_phy_impl_if {
 	/* Pre/Post KR training enablement support */
 	void (*kr_training_pre)(struct xgbe_prv_data *);
 	void (*kr_training_post)(struct xgbe_prv_data *);
+
+	/* SFP module related info */
+	int (*module_info)(struct xgbe_prv_data *pdata,
+			   struct ethtool_modinfo *modinfo);
+	int (*module_eeprom)(struct xgbe_prv_data *pdata,
+			     struct ethtool_eeprom *eeprom, u8 *data);
 };
 
 struct xgbe_phy_if {
@@ -905,6 +912,12 @@ struct xgbe_phy_if {
 	/* For single interrupt support */
 	irqreturn_t (*an_isr)(struct xgbe_prv_data *);
 
+	/* For ethtool PHY support */
+	int (*module_info)(struct xgbe_prv_data *pdata,
+			   struct ethtool_modinfo *modinfo);
+	int (*module_eeprom)(struct xgbe_prv_data *pdata,
+			     struct ethtool_eeprom *eeprom, u8 *data);
+
 	/* PHY implementation specific services */
 	struct xgbe_phy_impl_if phy_impl;
 };

  parent reply	other threads:[~2018-05-21 21:59 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-21 21:58 [PATCH net-next 00/12] amd-xgbe: AMD XGBE driver updates 2018-05-21 Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 01/12] amd-xgbe: Fix debug output of max channel counts Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 02/12] amd-xgbe: Read and save the port property registers during probe Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 03/12] amd-xgbe: Remove use of comm_owned field Tom Lendacky
2018-05-21 21:58 ` [PATCH net-next 04/12] amd-xgbe: Remove field that indicates SFP diagnostic support Tom Lendacky
2018-05-21 21:59 ` Tom Lendacky [this message]
2018-05-21 21:59 ` [PATCH net-next 06/12] amd-xgbe: Add ethtool show/set ring parameter support Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 07/12] amd-xgbe: Prepare for ethtool set-channel support Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 08/12] amd-xgbe: Add ethtool show/set channels support Tom Lendacky
2018-05-22  5:35   ` Jakub Kicinski
2018-05-22 13:24     ` Tom Lendacky
2018-05-22 13:29       ` Edward Cree
2018-05-22 15:37         ` Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 09/12] amd-xgbe: Always attempt link training in KR mode Tom Lendacky
2018-05-21 21:59 ` [PATCH net-next 10/12] amd-xgbe: Advertise FEC support with the KR re-driver Tom Lendacky
2018-05-21 22:00 ` [PATCH net-next 11/12] amd-xgbe: Update the BelFuse quirk to support SGMII Tom Lendacky
2018-05-21 22:00 ` [PATCH net-next 12/12] amd-xgbe: Improve SFP 100Mbps auto-negotiation Tom Lendacky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180521215902.8135.25029.stgit@tlendack-t1.amdoffice.net \
    --to=thomas.lendacky@amd.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.