From: Cornelia Huck <cohuck@redhat.com>
To: Tiwei Bie <tiwei.bie@intel.com>
Cc: mst@redhat.com, stefanha@redhat.com, pbonzini@redhat.com,
virtio-dev@lists.oasis-open.org, dan.daly@intel.com,
alexander.h.duyck@intel.com, mark.d.rustad@intel.com,
cunming.liang@intel.com, zhihong.wang@intel.com
Subject: [virtio-dev] Re: [PATCH v2] content: support SR-IOV
Date: Tue, 22 May 2018 11:56:12 +0200 [thread overview]
Message-ID: <20180522115612.3977529e.cohuck@redhat.com> (raw)
In-Reply-To: <20180522045623.10383-1-tiwei.bie@intel.com>
On Tue, 22 May 2018 12:56:23 +0800
Tiwei Bie <tiwei.bie@intel.com> wrote:
> Allocate a feature bit for virtio devices which support SR-IOV.
>
> Suggested-by: Michael S. Tsirkin <mst@redhat.com>
> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
> Fixes: https://github.com/oasis-tcs/virtio-spec/issues/11
> ---
> More details can be found from this thread:
> https://patchwork.kernel.org/patch/10285541/
>
> This patch needs below patch applied first:
> https://github.com/oasis-tcs/virtio-spec/issues/10
> https://lists.oasis-open.org/archives/virtio-dev/201805/msg00046.html
>
> v1 -> v2:
> - s/Reserve/Allocate/ (MST);
> - Add a Fixes tag (MST);
> - Be more explicit in driver requirement (MST);
> - Remove the "device MAY fail" description (MST);
> - Rebase on IO_BARRIER patch;
>
> RFC -> v1:
> - Mention PCI in the description (Cornelia);
>
> content.tex | 15 +++++++++++++--
> 1 file changed, 13 insertions(+), 2 deletions(-)
>
> diff --git a/content.tex b/content.tex
> index 95c243f..1c23274 100644
> --- a/content.tex
> +++ b/content.tex
> @@ -95,10 +95,10 @@ Feature bits are allocated as follows:
> \begin{description}
> \item[0 to 23] Feature bits for the specific device type
>
> -\item[24 to 36] Feature bits reserved for extensions to the queue and
> +\item[24 to 37] Feature bits reserved for extensions to the queue and
> feature negotiation mechanisms
>
> -\item[37 and above] Feature bits reserved for future extensions.
> +\item[38 and above] Feature bits reserved for future extensions.
> \end{description}
>
> \begin{note}
> @@ -5357,6 +5357,9 @@ Descriptors} and \ref{sec:Packed Virtqueues / Indirect Flag: Scatter-Gather Supp
> better performance. This feature indicates whether
> a stronger form of barrier suitable for hardware
> devices is necessary.
> + \item[VIRTIO_F_SR_IOV(37)] This feature indicates that
> + the device supports Single Root I/O Virtualization.
> + Currently only virtio PCI devices support this feature.
Nit: s/virtio PCI devices/PCI devices/
(I'd be fine with keeping 'virtio', though.)
> \end{description}
>
> \drivernormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
> @@ -5376,6 +5379,11 @@ A driver SHOULD accept VIRTIO_F_IO_BARRIER if it is offered.
> If VIRTIO_F_IO_BARRIER has been negotiated, a driver MUST use
> the barriers suitable for hardware devices.
>
> +A driver SHOULD accept VIRTIO_F_SR_IOV if it is offered.
> +If VIRTIO_F_SR_IOV has been negotiated, a driver can
> +enable virtual functions through device's PCI SR-IOV
s/device's/the device's/
> +capability structure.
> +
> \devicenormative{\section}{Reserved Feature Bits}{Reserved Feature Bits}
>
> A device MUST offer VIRTIO_F_VERSION_1. A device MAY fail to operate further
> @@ -5392,6 +5400,9 @@ buffers in the same order in which they have been available.
> A device MAY fail to operate further if VIRTIO_F_IO_BARRIER
> is not accepted.
>
> +A device SHOULD offer VIRTIO_F_SR_IOV if it presents a PCI
> +SR-IOV capability structure.
> +
> \section{Legacy Interface: Reserved Feature Bits}\label{sec:Reserved Feature Bits / Legacy Interface: Reserved Feature Bits}
>
> Transitional devices MAY offer the following:
Else LGTM.
---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
next prev parent reply other threads:[~2018-05-22 9:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-22 4:56 [virtio-dev] [PATCH v2] content: support SR-IOV Tiwei Bie
2018-05-22 9:56 ` Cornelia Huck [this message]
2018-05-22 10:24 ` [virtio-dev] " Tiwei Bie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180522115612.3977529e.cohuck@redhat.com \
--to=cohuck@redhat.com \
--cc=alexander.h.duyck@intel.com \
--cc=cunming.liang@intel.com \
--cc=dan.daly@intel.com \
--cc=mark.d.rustad@intel.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=stefanha@redhat.com \
--cc=tiwei.bie@intel.com \
--cc=virtio-dev@lists.oasis-open.org \
--cc=zhihong.wang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.