All of lore.kernel.org
 help / color / mirror / Atom feed
From: dsahern@kernel.org
To: netdev@vger.kernel.org
Cc: roopa@cumulusnetworks.com, David Ahern <dsahern@gmail.com>
Subject: [PATCH RFC net-next 5/9] net/ipv6: Pass ifa6_config struct to inet6_addr_modify
Date: Wed, 23 May 2018 15:57:23 -0700	[thread overview]
Message-ID: <20180523225727.11386-6-dsahern@kernel.org> (raw)
In-Reply-To: <20180523225727.11386-1-dsahern@kernel.org>

From: David Ahern <dsahern@gmail.com>

Update inet6_addr_modify to take ifa6_config.

Signed-off-by: David Ahern <dsahern@gmail.com>
---
 net/ipv6/addrconf.c | 44 +++++++++++++++++++++++---------------------
 1 file changed, 23 insertions(+), 21 deletions(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 2db1acf70610..1b1e63a4520b 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -4527,8 +4527,7 @@ inet6_rtm_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh,
 			      ifm->ifa_prefixlen);
 }
 
-static int inet6_addr_modify(struct inet6_ifaddr *ifp, u32 ifa_flags,
-			     u32 prefered_lft, u32 valid_lft)
+static int inet6_addr_modify(struct inet6_ifaddr *ifp, struct ifa6_config *cfg)
 {
 	u32 flags;
 	clock_t expires;
@@ -4538,32 +4537,32 @@ static int inet6_addr_modify(struct inet6_ifaddr *ifp, u32 ifa_flags,
 
 	ASSERT_RTNL();
 
-	if (!valid_lft || (prefered_lft > valid_lft))
+	if (!cfg->valid_lft || cfg->preferred_lft > cfg->valid_lft)
 		return -EINVAL;
 
-	if (ifa_flags & IFA_F_MANAGETEMPADDR &&
+	if (cfg->ifa_flags & IFA_F_MANAGETEMPADDR &&
 	    (ifp->flags & IFA_F_TEMPORARY || ifp->prefix_len != 64))
 		return -EINVAL;
 
 	if (!(ifp->flags & IFA_F_TENTATIVE) || ifp->flags & IFA_F_DADFAILED)
-		ifa_flags &= ~IFA_F_OPTIMISTIC;
+		cfg->ifa_flags &= ~IFA_F_OPTIMISTIC;
 
-	timeout = addrconf_timeout_fixup(valid_lft, HZ);
+	timeout = addrconf_timeout_fixup(cfg->valid_lft, HZ);
 	if (addrconf_finite_timeout(timeout)) {
 		expires = jiffies_to_clock_t(timeout * HZ);
-		valid_lft = timeout;
+		cfg->valid_lft = timeout;
 		flags = RTF_EXPIRES;
 	} else {
 		expires = 0;
 		flags = 0;
-		ifa_flags |= IFA_F_PERMANENT;
+		cfg->ifa_flags |= IFA_F_PERMANENT;
 	}
 
-	timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+	timeout = addrconf_timeout_fixup(cfg->preferred_lft, HZ);
 	if (addrconf_finite_timeout(timeout)) {
 		if (timeout == 0)
-			ifa_flags |= IFA_F_DEPRECATED;
-		prefered_lft = timeout;
+			cfg->ifa_flags |= IFA_F_DEPRECATED;
+		cfg->preferred_lft = timeout;
 	}
 
 	spin_lock_bh(&ifp->lock);
@@ -4573,16 +4572,16 @@ static int inet6_addr_modify(struct inet6_ifaddr *ifp, u32 ifa_flags,
 	ifp->flags &= ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD |
 			IFA_F_HOMEADDRESS | IFA_F_MANAGETEMPADDR |
 			IFA_F_NOPREFIXROUTE);
-	ifp->flags |= ifa_flags;
+	ifp->flags |= cfg->ifa_flags;
 	ifp->tstamp = jiffies;
-	ifp->valid_lft = valid_lft;
-	ifp->prefered_lft = prefered_lft;
+	ifp->valid_lft = cfg->valid_lft;
+	ifp->prefered_lft = cfg->preferred_lft;
 
 	spin_unlock_bh(&ifp->lock);
 	if (!(ifp->flags&IFA_F_TENTATIVE))
 		ipv6_ifa_notify(0, ifp);
 
-	if (!(ifa_flags & IFA_F_NOPREFIXROUTE)) {
+	if (!(cfg->ifa_flags & IFA_F_NOPREFIXROUTE)) {
 		addrconf_prefix_route(&ifp->addr, ifp->prefix_len,
 				      ifp->idev->dev, expires, flags,
 				      GFP_KERNEL);
@@ -4601,10 +4600,14 @@ static int inet6_addr_modify(struct inet6_ifaddr *ifp, u32 ifa_flags,
 	}
 
 	if (was_managetempaddr || ifp->flags & IFA_F_MANAGETEMPADDR) {
-		if (was_managetempaddr && !(ifp->flags & IFA_F_MANAGETEMPADDR))
-			valid_lft = prefered_lft = 0;
-		manage_tempaddrs(ifp->idev, ifp, valid_lft, prefered_lft,
-				 !was_managetempaddr, jiffies);
+		if (was_managetempaddr &&
+		    !(ifp->flags & IFA_F_MANAGETEMPADDR)) {
+			cfg->valid_lft = 0;
+			cfg->preferred_lft = 0;
+		}
+		manage_tempaddrs(ifp->idev, ifp, cfg->valid_lft,
+				 cfg->preferred_lft, !was_managetempaddr,
+				 jiffies);
 	}
 
 	addrconf_verify_rtnl();
@@ -4691,8 +4694,7 @@ inet6_rtm_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh,
 	    !(nlh->nlmsg_flags & NLM_F_REPLACE))
 		err = -EEXIST;
 	else
-		err = inet6_addr_modify(ifa, cfg.ifa_flags, cfg.preferred_lft,
-					cfg.valid_lft);
+		err = inet6_addr_modify(ifa, &cfg);
 
 	in6_ifa_put(ifa);
 
-- 
2.11.0

  parent reply	other threads:[~2018-05-23 22:57 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-23 22:57 [PATCH RFC net-next 0/9] net: Add address attribute to control metric of prefix route dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 1/9] net/ipv6: Introduce ifa6_config struct dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 2/9] net/ipv6: Convert ipv6_add_addr to struct ifa6_config dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 3/9] net/ipv6: Remove temp variables in ipv6_create_tempaddr dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 4/9] net/ipv6: Pass ifa6_config struct to inet6_addr_add dsahern
2018-05-23 22:57 ` dsahern [this message]
2018-05-23 22:57 ` [PATCH RFC net-next 6/9] net: Add IFA_RT_PRIORITY address attribute dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 7/9] net/ipv4: Add support for specifying metric of connected routes dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 8/9] net/ipv6: " dsahern
2018-05-23 22:57 ` [PATCH RFC net-next 9/9] selftests: fib_tests: Add prefix route tests with metric dsahern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180523225727.11386-6-dsahern@kernel.org \
    --to=dsahern@kernel.org \
    --cc=dsahern@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=roopa@cumulusnetworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.