All of lore.kernel.org
 help / color / mirror / Atom feed
From: <mgreger@cinci.rr.com>
To: sedat.dilek@gmail.com
Cc: linux-wireless@vger.kernel.org
Subject: Re: Atheros AR9462 - 5Ghz not working
Date: Fri, 25 May 2018 20:39:22 +0000	[thread overview]
Message-ID: <20180525203922.QZ7AP.56018.root@dnvrco-web26> (raw)
In-Reply-To: <CA+icZUX+p2feWOnXSA=m3i+r560Mo2kHsadT4qFhx8VvUv_k8A@mail.gmail.com>


---- Sedat Dilek <sedat.dilek@gmail.com> wrote: 
> On Tue, May 22, 2018 at 7:21 PM,  <mgreger@cinci.rr.com> wrote:
> > I've run out of ideas and am hoping someone here can help.
> >
> > All I want to do is connect a client to my 5Ghz network.
> >
> > My client:
> >   OS is Debian stable "Stretch" with sysvinit instead of systemd
> >   Atheros AR9462 (World roaming 0x64 regdomain in EEPROM)
> >   "iw reg set US"
> >   "iw list" shows both 2.4Ghz and 5Ghz bands available.
> >   "iw wlp3s0 survey dump" shows received traffic on 5Ghz bands.
> >
> > There are oodles of 5Ghz AP's within range, but scans (including passive scans) reveal only 2.4Ghz networks. My only guess was that it won't transmit due to regulatory requirements, but I cannot make it work.
> >
> > What I've tried:
> >   Running with and without CRDA
> >   Running latest mainline kernel
> >   Hacking around on the ath9k driver and nl80211 to remove all regulatory enforcement.
> >
> > Nothing works and I'm pulling my hair out. Any help would be greatly appreciated.
> 
> Hi,
> 
> I try to give some initial help.
> 
> The linux-wireless driver is supported by ath9k driver see [1] and [2].
> 
> Unfortunately, you have not sent any log-files at least your dmesg-log.
> No output of the above userspace commands or userspace-tools versions.
> No information to VendorID/ProductID (PCI, USB, whatever).
> It's not clear to me if this is a kernelspace (ath9k-driver) or
> userspace (CRDA/regulatory) problem.
> How should someone help you effectively?
> 
> The linux-wireless wiki has somne informations on how to debug
> Atheros/Qualcomm ath9k-driver, see [3].
> 
> As a debianist I say try Linux v4.16 Debian packages from
> stretch-backports (and maybe a higher version of wireless-regdb).
> 
> Try to ask questions the smart way [4] :-).
> 
> Hope this helps.
> 
> Regards,
> - Sedat -
> 
> [1] https://wireless.wiki.kernel.org/en/users/drivers/ath9k
> [2] https://wireless.wiki.kernel.org/en/users/drivers/ath9k/devices
> [3] https://wireless.wiki.kernel.org/en/users/drivers/ath9k/debug
> [4] http://www.catb.org/esr/faqs/smart-questions.html



Here's everything you asked for (How could I know what to send until someone told me?):

kernel 4.9.88
iw version 4.9
crda 3.18
wireless-regdb 2016-6-10

Everything is stock debian stable except the kernel, but like I said before: completely different operating systems have the same problem.


/sys/kernel/debug/ieee80211/phy0/ath9k/base_eeprom

      EEPROM Version :          2
          RegDomain1 :        106
          RegDomain2 :         31
             TX Mask :          3
             RX Mask :          3
          Allow 5GHz :          1
          Allow 2GHz :          1
   Disable 2GHz HT20 :          0
   Disable 2GHz HT40 :          0
   Disable 5Ghz HT20 :          0
   Disable 5Ghz HT40 :          0
          Big Endian :          0
           RF Silent :         45
           BT option :          0
          Device Cap :          0
         Device Type :          5
  Power Table Offset :          0
        Tuning Caps1 :         72
        Tuning Caps2 :          0
 Enable Tx Temp Comp :          1
 Enable Tx Volt Comp :          0
   Enable fast clock :          1
     Enable doubling :          1
  Internal regulator :          1
        Enable Paprd :          1
     Driver Strength :          0
          Quick Drop :          1
   Chain mask Reduce :          0
   Write enable Gpio :          6
   WLAN Disable Gpio :          0
       WLAN LED Gpio :          8
 Rx Band Select Gpio :        255
             Tx Gain :          1
             Rx Gain :          1
              SW Reg :  303972982
          MacAddress : 74:c6:3b:bf:90:a3



/sys/kernel/debug/ieee80211/phy0/ath9k/base_eeprom

   2GHz modal Header :
 Chain0 Ant. Control :        336
 Chain1 Ant. Control :        336
 Chain2 Ant. Control :         16
 Ant. Common Control :    4195664
Ant. Common Control2 :     139810
           Ant. Gain :          0
       Switch Settle :         44
    Chain0 xatten1DB :          0
    Chain1 xatten1DB :          0
    Chain2 xatten1DB :          0
Chain0 xatten1Margin :          0
Chain1 xatten1Margin :          0
Chain2 xatten1Margin :          0
          Temp Slope :         25
          Volt Slope :          0
      spur Channels0 :        164
      spur Channels1 :          0
      spur Channels2 :          0
      spur Channels3 :          0
      spur Channels4 :          0
 Chain0 NF Threshold :         -1
 Chain1 NF Threshold :          0
 Chain2 NF Threshold :          0
          Quick Drop :          0
       txEndToXpaOff :          0
      xPA Bias Level :          0
  txFrameToDataStart :         14
       txFrameToPaOn :         14
      txFrameToXpaOn :         14
              txClip :          3
    ADC Desired size :        -30
   5GHz modal Header :
 Chain0 Ant. Control :        336
 Chain1 Ant. Control :        336
 Chain2 Ant. Control :         80
 Ant. Common Control :    8390784
Ant. Common Control2 :     139810
           Ant. Gain :          0
       Switch Settle :         45
    Chain0 xatten1DB :          0
    Chain1 xatten1DB :          0
    Chain2 xatten1DB :          0
Chain0 xatten1Margin :          0
Chain1 xatten1Margin :          0
Chain2 xatten1Margin :          0
          Temp Slope :         55
          Volt Slope :          0
      spur Channels0 :         80
      spur Channels1 :        144
      spur Channels2 :        176
      spur Channels3 :        192
      spur Channels4 :        200
 Chain0 NF Threshold :         -1
 Chain1 NF Threshold :          0
 Chain2 NF Threshold :          0
          Quick Drop :          0
       txEndToXpaOff :          0
      xPA Bias Level :          0
  txFrameToDataStart :         14
       txFrameToPaOn :         14
      txFrameToXpaOn :         14
              txClip :          3
    ADC Desired size :        -30



/sys/kernel/debug/ieee80211/phy0/ath9k/recv

          PKTS-ALL :       9721
         BYTES-ALL :    2900995
           BEACONS :       8220
             FRAGS :          0
          SPECTRAL :          0
           CRC ERR :        137
   DECRYPT CRC ERR :          4
           PHY ERR :          4
           MIC ERR :          0
 PRE-DELIM CRC ERR :          0
POST-DELIM CRC ERR :        639
  DECRYPT BUSY ERR :          0
        LENGTH-ERR :          0
           OOM-ERR :          0
          RATE-ERR :          0
    TOO-MANY-FRAGS :          0



lspci -vs 03:00

03:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network Adapter (rev 01)
	Subsystem: AzureWave AR9462 Wireless Network Adapter
	Flags: bus master, fast devsel, latency 0, IRQ 18
	Memory at df000000 (64-bit, non-prefetchable) [size=512K]
	Expansion ROM at df080000 [disabled] [size=64K]
	Capabilities: [40] Power Management version 2
	Capabilities: [50] MSI: Enable- Count=1/4 Maskable+ 64bit+
	Capabilities: [70] Express Endpoint, MSI 00
	Capabilities: [100] Advanced Error Reporting
	Capabilities: [140] Virtual Channel
	Capabilities: [160] Device Serial Number 00-00-00-00-00-00-00-00
	Kernel driver in use: ath9k
	Kernel modules: ath9k



iw reg get

global
country US: DFS-FCC
	(2402 - 2472 @ 40), (N/A, 30), (N/A)
	(5170 - 5250 @ 80), (N/A, 23), (N/A), AUTO-BW
	(5250 - 5330 @ 80), (N/A, 23), (0 ms), DFS, AUTO-BW
	(5490 - 5730 @ 160), (N/A, 23), (0 ms), DFS
	(5735 - 5835 @ 80), (N/A, 30), (N/A)
	(57240 - 63720 @ 2160), (N/A, 40), (N/A)



iw wlp3s0 info

Interface wlp3s0
	ifindex 3
	wdev 0x1
	addr 74:c6:3b:bf:90:a3
	type managed
	wiphy 0
	channel 8 (2447 MHz), width: 20 MHz, center1: 2447 MHz
	txpower 19.00 dBm



iw list

Wiphy phy0
	max # scan SSIDs: 4
	max scan IEs length: 2257 bytes
	max # sched scan SSIDs: 0
	max # match sets: 0
	max # scan plans: 1
	max scan plan interval: -1
	max scan plan iterations: 0
	Retry short limit: 7
	Retry long limit: 4
	Coverage class: 0 (up to 0m)
	Device supports RSN-IBSS.
	Device supports AP-side u-APSD.
	Device supports T-DLS.
	Supported Ciphers:
		* WEP40 (00-0f-ac:1)
		* WEP104 (00-0f-ac:5)
		* TKIP (00-0f-ac:2)
		* CCMP-128 (00-0f-ac:4)
		* CCMP-256 (00-0f-ac:10)
		* GCMP-128 (00-0f-ac:8)
		* GCMP-256 (00-0f-ac:9)
		* CMAC (00-0f-ac:6)
		* CMAC-256 (00-0f-ac:13)
		* GMAC-128 (00-0f-ac:11)
		* GMAC-256 (00-0f-ac:12)
	Available Antennas: TX 0x3 RX 0x3
	Configured Antennas: TX 0x3 RX 0x3
	Supported interface modes:
		 * IBSS
		 * managed
		 * AP
		 * AP/VLAN
		 * WDS
		 * monitor
		 * mesh point
		 * P2P-client
		 * P2P-GO
		 * outside context of a BSS
	Band 1:
		Capabilities: 0x11ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT TX/RX MCS rate indexes supported: 0-15
		Bitrates (non-HT):
			* 1.0 Mbps
			* 2.0 Mbps (short preamble supported)
			* 5.5 Mbps (short preamble supported)
			* 11.0 Mbps (short preamble supported)
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 2412 MHz [1] (30.0 dBm)
			* 2417 MHz [2] (30.0 dBm)
			* 2422 MHz [3] (30.0 dBm)
			* 2427 MHz [4] (30.0 dBm)
			* 2432 MHz [5] (30.0 dBm)
			* 2437 MHz [6] (30.0 dBm)
			* 2442 MHz [7] (30.0 dBm)
			* 2447 MHz [8] (30.0 dBm)
			* 2452 MHz [9] (30.0 dBm)
			* 2457 MHz [10] (30.0 dBm)
			* 2462 MHz [11] (30.0 dBm)
			* 2467 MHz [12] (disabled)
			* 2472 MHz [13] (disabled)
			* 2484 MHz [14] (disabled)
	Band 2:
		Capabilities: 0x11ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT TX/RX MCS rate indexes supported: 0-15
		Bitrates (non-HT):
			* 6.0 Mbps
			* 9.0 Mbps
			* 12.0 Mbps
			* 18.0 Mbps
			* 24.0 Mbps
			* 36.0 Mbps
			* 48.0 Mbps
			* 54.0 Mbps
		Frequencies:
			* 5180 MHz [36] (23.0 dBm)
			* 5200 MHz [40] (23.0 dBm)
			* 5220 MHz [44] (23.0 dBm)
			* 5240 MHz [48] (23.0 dBm)
			* 5260 MHz [52] (23.0 dBm) (radar detection)
			* 5280 MHz [56] (23.0 dBm) (radar detection)
			* 5300 MHz [60] (23.0 dBm) (radar detection)
			* 5320 MHz [64] (23.0 dBm) (radar detection)
			* 5500 MHz [100] (23.0 dBm) (radar detection)
			* 5520 MHz [104] (23.0 dBm) (radar detection)
			* 5540 MHz [108] (23.0 dBm) (radar detection)
			* 5560 MHz [112] (23.0 dBm) (radar detection)
			* 5580 MHz [116] (23.0 dBm) (radar detection)
			* 5600 MHz [120] (23.0 dBm) (radar detection)
			* 5620 MHz [124] (23.0 dBm) (radar detection)
			* 5640 MHz [128] (23.0 dBm) (radar detection)
			* 5660 MHz [132] (23.0 dBm) (radar detection)
			* 5680 MHz [136] (23.0 dBm) (radar detection)
			* 5700 MHz [140] (23.0 dBm) (radar detection)
			* 5745 MHz [149] (30.0 dBm)
			* 5765 MHz [153] (30.0 dBm)
			* 5785 MHz [157] (30.0 dBm)
			* 5805 MHz [161] (30.0 dBm)
			* 5825 MHz [165] (30.0 dBm)
	Supported commands:
		 * new_interface
		 * set_interface
		 * new_key
		 * start_ap
		 * new_station
		 * new_mpath
		 * set_mesh_config
		 * set_bss
		 * authenticate
		 * associate
		 * deauthenticate
		 * disassociate
		 * join_ibss
		 * join_mesh
		 * remain_on_channel
		 * set_tx_bitrate_mask
		 * frame
		 * frame_wait_cancel
		 * set_wiphy_netns
		 * set_channel
		 * set_wds_peer
		 * tdls_mgmt
		 * tdls_oper
		 * probe_client
		 * set_noack_map
		 * register_beacons
		 * start_p2p_device
		 * set_mcast_rate
		 * channel_switch
		 * set_qos_map
		 * connect
		 * disconnect
	Supported TX frame types:
		 * IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
		 * P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
	Supported RX frame types:
		 * IBSS: 0x40 0xb0 0xc0 0xd0
		 * managed: 0x40 0xd0
		 * AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * mesh point: 0xb0 0xc0 0xd0
		 * P2P-client: 0x40 0xd0
		 * P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
		 * P2P-device: 0x40 0xd0
	software interface modes (can always be added):
		 * AP/VLAN
		 * monitor
	valid interface combinations:
		 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1,
		   total <= 2048, #channels <= 1, STA/AP BI must match
		 * #{ WDS } <= 2048,
		   total <= 2048, #channels <= 1, STA/AP BI must match
	HT Capability overrides:
		 * MCS: ff ff ff ff ff ff ff ff ff ff
		 * maximum A-MSDU length
		 * supported channel width
		 * short GI for 40 MHz
		 * max A-MPDU length exponent
		 * min MPDU start spacing
	Device supports TX status socket option.
	Device supports HT-IBSS.
	Device supports SAE with AUTHENTICATE command
	Device supports low priority scan.
	Device supports scan flush.
	Device supports AP scan.
	Device supports per-vif TX power setting
	P2P GO supports CT window setting
	Driver supports full state transitions for AP/GO clients
	Driver supports a userspace MPM
	Device supports active monitor (which will ACK incoming frames)
	Driver/device bandwidth changes during BSS lifetime (AP/GO mode)
	Device supports configuring vdev MAC-addr on create.



iw phy0 channels

Band 1:
	* 2412 MHz [1] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40+
	* 2417 MHz [2] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40+
	* 2422 MHz [3] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40+
	* 2427 MHz [4] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40+
	* 2432 MHz [5] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 2437 MHz [6] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 2442 MHz [7] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 2447 MHz [8] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40-
	* 2452 MHz [9] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40-
	* 2457 MHz [10] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40-
	* 2462 MHz [11] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40-
	* 2467 MHz [12] (disabled)
	* 2472 MHz [13] (disabled)
	* 2484 MHz [14] (disabled)
Band 2:
	* 5180 MHz [36] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40+
	* 5200 MHz [40] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 5220 MHz [44] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 5240 MHz [48] 
	  Maximum TX power: 16.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 5260 MHz [52] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5280 MHz [56] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5300 MHz [60] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5320 MHz [64] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40-
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5500 MHz [100] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5520 MHz [104] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5540 MHz [108] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5560 MHz [112] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5580 MHz [116] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5600 MHz [120] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5620 MHz [124] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5640 MHz [128] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5660 MHz [132] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5680 MHz [136] 
	  Maximum TX power: 17.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40- HT40+
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5700 MHz [140] 
	  Maximum TX power: 16.0 dBm
	  Radar detection
	  Channel widths: 20MHz HT40-
	  DFS state: usable (for 82 sec)
	  DFS CAC time: 60000 ms
	* 5745 MHz [149] 
	  Maximum TX power: 17.0 dBm
	  Channel widths: 20MHz HT40+
	* 5765 MHz [153] 
	  Maximum TX power: 17.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 5785 MHz [157] 
	  Maximum TX power: 17.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 5805 MHz [161] 
	  Maximum TX power: 17.0 dBm
	  Channel widths: 20MHz HT40- HT40+
	* 5825 MHz [165] 
	  Maximum TX power: 17.0 dBm
	  Channel widths: 20MHz HT40-



iw wlp3s0 survey dump

Survey data from wlp3s0
	frequency:			2412 MHz
	noise:				-86 dBm
	channel active time:		216 ms
	channel busy time:		70 ms
	channel receive time:		44 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2417 MHz
	noise:				-86 dBm
	channel active time:		63 ms
	channel busy time:		15 ms
	channel receive time:		8 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2422 MHz
	noise:				-86 dBm
	channel active time:		63 ms
	channel busy time:		12 ms
	channel receive time:		10 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2427 MHz
	noise:				-87 dBm
	channel active time:		63 ms
	channel busy time:		10 ms
	channel receive time:		4 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2432 MHz
	noise:				-87 dBm
	channel active time:		62 ms
	channel busy time:		13 ms
	channel receive time:		8 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2437 MHz
	noise:				-87 dBm
	channel active time:		62 ms
	channel busy time:		18 ms
	channel receive time:		16 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2442 MHz
	noise:				-87 dBm
	channel active time:		62 ms
	channel busy time:		8 ms
	channel receive time:		4 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2447 MHz [in use]
	noise:				-89 dBm
	channel active time:		615524 ms
	channel busy time:		76644 ms
	channel receive time:		72453 ms
	channel transmit time:		120 ms
Survey data from wlp3s0
	frequency:			2452 MHz
	noise:				-88 dBm
	channel active time:		63 ms
	channel busy time:		4 ms
	channel receive time:		1 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2457 MHz
	noise:				-88 dBm
	channel active time:		62 ms
	channel busy time:		8 ms
	channel receive time:		5 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			2462 MHz
	noise:				-89 dBm
	channel active time:		62 ms
	channel busy time:		12 ms
	channel receive time:		9 ms
	channel transmit time:		1 ms
Survey data from wlp3s0
	frequency:			5180 MHz
	noise:				-78 dBm
	channel active time:		67 ms
	channel busy time:		21 ms
	channel receive time:		15 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5200 MHz
	noise:				-95 dBm
	channel active time:		63 ms
	channel busy time:		0 ms
	channel receive time:		0 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5220 MHz
	noise:				-78 dBm
	channel active time:		62 ms
	channel busy time:		19 ms
	channel receive time:		17 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5240 MHz
	noise:				-78 dBm
	channel active time:		63 ms
	channel busy time:		15 ms
	channel receive time:		13 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5260 MHz
	noise:				-78 dBm
	channel active time:		111 ms
	channel busy time:		42 ms
	channel receive time:		41 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5280 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		42 ms
	channel receive time:		41 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5300 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		29 ms
	channel receive time:		28 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5320 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		41 ms
	channel receive time:		40 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5500 MHz
	noise:				-77 dBm
	channel active time:		111 ms
	channel busy time:		45 ms
	channel receive time:		44 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5520 MHz
	noise:				-95 dBm
	channel active time:		110 ms
	channel busy time:		0 ms
	channel receive time:		0 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5540 MHz
	noise:				-78 dBm
	channel active time:		111 ms
	channel busy time:		44 ms
	channel receive time:		43 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5560 MHz
	noise:				-77 dBm
	channel active time:		111 ms
	channel busy time:		40 ms
	channel receive time:		39 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5580 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		39 ms
	channel receive time:		38 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5600 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		27 ms
	channel receive time:		26 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5620 MHz
	noise:				-78 dBm
	channel active time:		111 ms
	channel busy time:		27 ms
	channel receive time:		27 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5640 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		30 ms
	channel receive time:		29 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5660 MHz
	noise:				-79 dBm
	channel active time:		110 ms
	channel busy time:		44 ms
	channel receive time:		43 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5680 MHz
	noise:				-95 dBm
	channel active time:		110 ms
	channel busy time:		0 ms
	channel receive time:		0 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5700 MHz
	noise:				-78 dBm
	channel active time:		110 ms
	channel busy time:		32 ms
	channel receive time:		31 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5745 MHz
	noise:				-78 dBm
	channel active time:		63 ms
	channel busy time:		14 ms
	channel receive time:		13 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5765 MHz
	noise:				-79 dBm
	channel active time:		62 ms
	channel busy time:		14 ms
	channel receive time:		12 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5785 MHz
	noise:				-78 dBm
	channel active time:		63 ms
	channel busy time:		20 ms
	channel receive time:		18 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5805 MHz
	noise:				-78 dBm
	channel active time:		62 ms
	channel busy time:		10 ms
	channel receive time:		9 ms
	channel transmit time:		0 ms
Survey data from wlp3s0
	frequency:			5825 MHz
	noise:				-79 dBm
	channel active time:		63 ms
	channel busy time:		24 ms
	channel receive time:		22 ms
	channel transmit time:		0 ms



iw dev wlp3s0 scan

BSS 60:31:97:0f:d0:41(on wlp3s0)
	TSF: 4540802549928 usec (52d, 13:20:02)
	freq: 2412
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -76.00 dBm
	last seen: 8200 ms ago
	Information elements from Probe Response frame:
	SSID: Home
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0* 36.0 54.0 
	DS Parameter set: channel 1
	ERP: Barker_Preamble_Mode
	Extended supported rates: 6.0* 9.0 12.0* 48.0 
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	BSS Load:
		 * station count: 2
		 * channel utilisation: 53/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x8bc
			HT20
			SM Power Save disabled
			RX Greenfield
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			No DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 1
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 1
		 * HT protection: nonmember
		 * non-GF present: 1
		 * OBSS non-GF present: 1
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: Extended Channel Switching, BSS Transition, 6
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * Response Type: 3 (AP)
		 * UUID: 677b63dd-ca69-3baf-6473-e9e8105d1d6a
		 * Manufacturer: ZyXEL
		 * Model: EMG3415-B10A
		 * Model Number: EMG3415-B10A
		 * Serial Number: S172V19000107
		 * Primary Device Type: 6-0050f204-1
		 * Device name: EMG3415-B10A ZyXELAP 2.4G
		 * Config methods: Label, Display
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS aa:40:a0:56:93:af(on wlp3s0)
	TSF: 1849339597187 usec (21d, 09:42:19)
	freq: 2412
	beacon interval: 100 TUs
	capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
	signal: -60.00 dBm
	last seen: 8176 ms ago
	Information elements from Probe Response frame:
	SSID: 
	Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 
	DS Parameter set: channel 1
	TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
	Country: US	Environment: Indoor/Outdoor
		Channels [1 - 11] @ 127 dBm
	ERP: <no flags>
	Extended supported rates: 24.0 36.0 48.0 54.0 
	HT capabilities:
		Capabilities: 0x19ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: No restriction (0x00)
		HT TX/RX MCS rate indexes supported: 0-15
	HT operation:
		 * primary channel: 1
		 * secondary channel offset: above
		 * STA channel width: any
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Overlapping BSS scan params:
		 * passive dwell: 20 TUs
		 * active dwell: 10 TUs
		 * channel width trigger scan interval: 300 s
		 * scan passive total per channel: 200 TUs
		 * scan active total per channel: 20 TUs
		 * BSS width channel transition delay factor: 5
		 * OBSS Scan Activity Threshold: 0.25 %
	Extended capabilities: HT Information Exchange Supported, Extended Channel Switching, TFS, WNM-Sleep Mode, TIM Broadcast, BSS Transition, SSID List, 6
	VHT capabilities:
		VHT Capabilities (0x338959b2):
			Max MPDU length: 11454
			Supported Channel Width: neither 160 nor 80+80
			RX LDPC
			short GI (80 MHz)
			TX STBC
			SU Beamformer
			SU Beamformee
			MU Beamformer
			RX antenna pattern consistency
			TX antenna pattern consistency
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 0 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 0 Mbps
	VHT operation:
		 * channel width: 0 (20 or 40 MHz)
		 * center freq segment 1: 0
		 * center freq segment 2: 0
		 * VHT basic MCS set: 0xfffc
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
BSS a6:40:a0:56:93:af(on wlp3s0)
	TSF: 1849339615943 usec (21d, 09:42:19)
	freq: 2412
	beacon interval: 100 TUs
	capability: ESS Privacy ShortPreamble ShortSlotTime RadioMeasure (0x1431)
	signal: -63.00 dBm
	last seen: 7920 ms ago
	Information elements from Probe Response frame:
	SSID: ORBI84
	Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 
	DS Parameter set: channel 1
	Country: US	Environment: Indoor/Outdoor
		Channels [1 - 11] @ 127 dBm
	ERP: <no flags>
	Extended supported rates: 24.0 36.0 48.0 54.0 
	HT capabilities:
		Capabilities: 0x19ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: No restriction (0x00)
		HT TX/RX MCS rate indexes supported: 0-15
	HT operation:
		 * primary channel: 1
		 * secondary channel offset: above
		 * STA channel width: any
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Overlapping BSS scan params:
		 * passive dwell: 20 TUs
		 * active dwell: 10 TUs
		 * channel width trigger scan interval: 300 s
		 * scan passive total per channel: 200 TUs
		 * scan active total per channel: 20 TUs
		 * BSS width channel transition delay factor: 5
		 * OBSS Scan Activity Threshold: 0.25 %
	Extended capabilities: HT Information Exchange Supported, Extended Channel Switching, TFS, WNM-Sleep Mode, TIM Broadcast, BSS Transition, SSID List, 6
	VHT capabilities:
		VHT Capabilities (0x338041b2):
			Max MPDU length: 11454
			Supported Channel Width: neither 160 nor 80+80
			RX LDPC
			short GI (80 MHz)
			TX STBC
			RX antenna pattern consistency
			TX antenna pattern consistency
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 0 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 0 Mbps
	VHT operation:
		 * channel width: 0 (20 or 40 MHz)
		 * center freq segment 1: 0
		 * center freq segment 2: 0
		 * VHT basic MCS set: 0xfffc
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * Response Type: 3 (AP)
		 * UUID: 87654321-9abc-def0-1234-a040a05693af
		 * Manufacturer: openwrt.org
		 * Model: WAP
		 * Model Number: 123
		 * Serial Number: 12345
		 * Primary Device Type: 6-0050f204-1
		 * Device name: RBR40(Wireless AP)
		 * Config methods:
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
BSS 58:90:43:47:5d:7c(on wlp3s0)
	TSF: 671994675584 usec (7d, 18:39:54)
	freq: 2437
	beacon interval: 100 TUs
	capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
	signal: -75.00 dBm
	last seen: 132 ms ago
	Information elements from Probe Response frame:
	SSID: ListWifi
	Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0* 9.0 12.0* 18.0 
	DS Parameter set: channel 6
	TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
	Country: US	Environment: Indoor/Outdoor
		Channels [1 - 11] @ 30 dBm
	ERP: <no flags>
	Extended supported rates: 24.0* 36.0 48.0 54.0 
	HT capabilities:
		Capabilities: 0x1ad
			RX LDPC
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			No DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT TX/RX MCS rate indexes supported: 0-23
	HT operation:
		 * primary channel: 6
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: nonmember
		 * non-GF present: 0
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: TFS, WNM-Sleep Mode, TIM Broadcast, BSS Transition, 6
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
BSS a0:e4:cb:92:d6:3b(on wlp3s0)
	TSF: 170084643804 usec (1d, 23:14:44)
	freq: 2442
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -72.00 dBm
	last seen: 240 ms ago
	Information elements from Probe Response frame:
	SSID: ZyXEL39005
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 7
	ERP: Barker_Preamble_Mode
	ERP D4.0: Barker_Preamble_Mode
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 4
		 * channel utilisation: 59/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 7
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 1 (Unconfigured)
		 * Response Type: 3 (AP)
		 * UUID: 6964dff7-f9ec-882d-bbf8-b4251d765cbb
		 * Manufacturer: ZyXEL
		 * Model: VMG4381-B10A
		 * Model Number: VMG4381-B10A
		 * Serial Number: 96368GW
		 * Primary Device Type: 6-0050f204-1
		 * Device name: VMG4381-B10A
		 * Config methods: Label, Display
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 58:8b:f3:a2:04:01(on wlp3s0)
	TSF: 1026097385439 usec (11d, 21:01:37)
	freq: 2442
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -78.00 dBm
	last seen: 104 ms ago
	Information elements from Probe Response frame:
	SSID: ZyXEL28348
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 7
	ERP: <no flags>
	ERP D4.0: <no flags>
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 1
		 * channel utilisation: 93/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 7
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 1 (Unconfigured)
		 * Response Type: 3 (AP)
		 * UUID: 9267b03e-2d9f-963b-e8c9-705fbbbed7d5
		 * Manufacturer: ZyXEL
		 * Model: VMG4381-B10A
		 * Model Number: VMG4381-B10A
		 * Serial Number: 96368GW
		 * Primary Device Type: 6-0050f204-1
		 * Device name: VMG4381-B10A
		 * Config methods: Label, Display
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS c0:56:27:62:ac:49(on wlp3s0) -- associated
	TSF: 522053362683 usec (6d, 01:00:53)
	freq: 2447
	beacon interval: 100 TUs
	capability: ESS Privacy ShortPreamble ShortSlotTime (0x0431)
	signal: -19.00 dBm
	last seen: 124 ms ago
	Information elements from Probe Response frame:
	SSID: ?
	Supported rates: 1.0* 2.0* 5.5* 11.0* 22.0 6.0 9.0 12.0 
	DS Parameter set: channel 8
	Country: US	Environment: Indoor/Outdoor
		Channels [1 - 11] @ 30 dBm
	ERP: <no flags>
	Extended supported rates: 18.0 24.0 36.0 48.0 54.0 
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	HT capabilities:
		Capabilities: 0x106f
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			No RX STBC
			Max AMSDU length: 3839 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT TX/RX MCS rate indexes supported: 0-23, 32
	HT operation:
		 * primary channel: 8
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: Extended Channel Switching, 6
	WMM:	 * Parameter version 1
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 00:ac:e0:7e:26:30(on wlp3s0)
	TSF: 515368038772 usec (5d, 23:09:28)
	freq: 2462
	beacon interval: 100 TUs
	capability: ESS Privacy ShortPreamble ShortSlotTime APSD (0x0c31)
	signal: -70.00 dBm
	last seen: 6520 ms ago
	Information elements from Probe Response frame:
	SSID: Wagoner1
	Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0 
	DS Parameter set: channel 11
	Extended supported rates: 6.0 12.0 24.0 48.0 
	Country: US	Environment: Indoor/Outdoor
		Channels [1 - 11] @ 36 dBm
	TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * UUID: 36135900-1dd2-11b2-8601-5753435f5555
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	ERP: <no flags>
	HT capabilities:
		Capabilities: 0x1ec
			HT20
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 3839 bytes
			No DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 4 usec (0x05)
		HT RX MCS rate indexes supported: 0-23
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 11
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 0
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: HT Information Exchange Supported
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
	BSS Load:
		 * station count: 0
		 * channel utilisation: 21/255
		 * available admission capacity: 31250 [*32us]
BSS e8:37:7a:d2:a5:93(on wlp3s0)
	TSF: 7212237926787 usec (83d, 11:23:57)
	freq: 2462
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -63.00 dBm
	last seen: 96 ms ago
	Information elements from Probe Response frame:
	SSID: ZyXEL80126
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 11
	TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x2
	ERP: Use_Protection Barker_Preamble_Mode
	ERP D4.0: Use_Protection Barker_Preamble_Mode
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 2
		 * channel utilisation: 75/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 11
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: non-HT mixed
		 * non-GF present: 1
		 * OBSS non-GF present: 1
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * UUID: d2e04b00-bcc6-3c0c-3ede-560199179809
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS b8:ec:a3:50:1a:94(on wlp3s0)
	TSF: 4156384459795 usec (48d, 02:33:04)
	freq: 2432
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -81.00 dBm
	last seen: 7552 ms ago
	Information elements from Probe Response frame:
	SSID: ZyXEL03149
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 5
	ERP: Barker_Preamble_Mode
	ERP D4.0: Barker_Preamble_Mode
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 7
		 * channel utilisation: 80/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 5
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: nonmember
		 * non-GF present: 1
		 * OBSS non-GF present: 1
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 1 (Unconfigured)
		 * Response Type: 3 (AP)
		 * UUID: 8edb1b1f-8868-d690-039e-ea062272c6d7
		 * Manufacturer: ZyXEL
		 * Model: VMG4381-B10A
		 * Model Number: VMG4381-B10A
		 * Serial Number: 96368GW
		 * Primary Device Type: 6-0050f204-1
		 * Device name: VMG4381-B10A
		 * Config methods: Label, Display
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 9c:3d:cf:09:92:60(on wlp3s0)
	TSF: 1849362077524 usec (21d, 09:42:42)
	freq: 2412
	beacon interval: 300 TUs
	capability: ESS Privacy ShortPreamble ShortSlotTime RadioMeasure (0x1431)
	signal: -67.00 dBm
	last seen: 7864 ms ago
	Information elements from Probe Response frame:
	SSID: ORBI84
	Supported rates: 1.0* 2.0* 5.5* 11.0* 6.0 9.0 12.0 18.0 
	DS Parameter set: channel 1
	ERP: <no flags>
	Extended supported rates: 24.0 36.0 48.0 54.0 
	HT capabilities:
		Capabilities: 0x19ef
			RX LDPC
			HT20/HT40
			SM Power Save disabled
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			RX STBC 1-stream
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: No restriction (0x00)
		HT TX/RX MCS rate indexes supported: 0-15
	HT operation:
		 * primary channel: 1
		 * secondary channel offset: above
		 * STA channel width: any
		 * RIFS: 0
		 * HT protection: nonmember
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Overlapping BSS scan params:
		 * passive dwell: 20 TUs
		 * active dwell: 10 TUs
		 * channel width trigger scan interval: 300 s
		 * scan passive total per channel: 200 TUs
		 * scan active total per channel: 20 TUs
		 * BSS width channel transition delay factor: 5
		 * OBSS Scan Activity Threshold: 0.25 %
	Extended capabilities: HT Information Exchange Supported, Extended Channel Switching, TFS, WNM-Sleep Mode, TIM Broadcast, BSS Transition, SSID List, 6
	VHT capabilities:
		VHT Capabilities (0x338041b2):
			Max MPDU length: 11454
			Supported Channel Width: neither 160 nor 80+80
			RX LDPC
			short GI (80 MHz)
			TX STBC
			RX antenna pattern consistency
			TX antenna pattern consistency
		VHT RX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT RX highest supported: 0 Mbps
		VHT TX MCS set:
			1 streams: MCS 0-9
			2 streams: MCS 0-9
			3 streams: not supported
			4 streams: not supported
			5 streams: not supported
			6 streams: not supported
			7 streams: not supported
			8 streams: not supported
		VHT TX highest supported: 0 Mbps
	VHT operation:
		 * channel width: 0 (20 or 40 MHz)
		 * center freq segment 1: 0
		 * center freq segment 2: 0
		 * VHT basic MCS set: 0xfffc
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 1-PTKSA-RC 1-GTKSA-RC (0x0000)
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * Response Type: 3 (AP)
		 * UUID: 87654321-9abc-def0-1234-9c3dcf099260
		 * Manufacturer: openwrt.org
		 * Model: WAP
		 * Model Number: 123
		 * Serial Number: 12345
		 * Primary Device Type: 6-0050f204-1
		 * Device name: RBW30(Wireless AP)
		 * Config methods:
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
BSS 74:44:01:3d:9c:03(on wlp3s0)
	TSF: 6897418342787 usec (79d, 19:56:58)
	freq: 2412
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -71.00 dBm
	last seen: 8248 ms ago
	Information elements from Probe Response frame:
	SSID: 1087
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 1
	TIM: DTIM Count 1 DTIM Period 2 Bitmap Control 0x0 Bitmap[0] 0x0
	ERP: Barker_Preamble_Mode
	ERP D4.0: Barker_Preamble_Mode
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	HT capabilities:
		Capabilities: 0x18fc
			HT20
			SM Power Save disabled
			RX Greenfield
			RX HT20 SGI
			RX HT40 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 1
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: non-HT mixed
		 * non-GF present: 1
		 * OBSS non-GF present: 1
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Overlapping BSS scan params:
		 * passive dwell: 20 TUs
		 * active dwell: 10 TUs
		 * channel width trigger scan interval: 300 s
		 * scan passive total per channel: 200 TUs
		 * scan active total per channel: 20 TUs
		 * BSS width channel transition delay factor: 5
		 * OBSS Scan Activity Threshold: 0.25 %
	Extended capabilities: HT Information Exchange Supported
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * UUID: 72e9a727-0304-3186-62c4-927362e67f0a
		 * RF Bands: 0x3
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 1c:74:0d:58:4d:68(on wlp3s0)
	TSF: 10984278181146 usec (127d, 03:11:18)
	freq: 2412
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -78.00 dBm
	last seen: 8164 ms ago
	Information elements from Probe Response frame:
	SSID: Sophie
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 1
	ERP: <no flags>
	ERP D4.0: <no flags>
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 2
		 * channel utilisation: 100/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 1
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: nonmember
		 * non-GF present: 1
		 * OBSS non-GF present: 1
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * Response Type: 3 (AP)
		 * UUID: cf44a35e-5217-ac12-139c-99aaf31998d2
		 * Manufacturer: ZyXEL
		 * Model: VMG4381-B10A
		 * Model Number: VMG4381-B10A
		 * Serial Number: 96368GW
		 * Primary Device Type: 6-0050f204-1
		 * Device name: VMG4381-B10A
		 * Config methods: Label, Display
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 60:31:97:24:bb:0c(on wlp3s0)
	TSF: 3879963961644 usec (44d, 21:46:03)
	freq: 2452
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -78.00 dBm
	last seen: 120 ms ago
	Information elements from Probe Response frame:
	SSID: ZyXEL47078
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 9
	ERP: Barker_Preamble_Mode
	ERP D4.0: Barker_Preamble_Mode
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 5
		 * channel utilisation: 39/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 9
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: no
		 * non-GF present: 1
		 * OBSS non-GF present: 0
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 1 (Unconfigured)
		 * Response Type: 3 (AP)
		 * UUID: cf05e0b4-24ab-9316-9113-1700541dfd46
		 * Manufacturer: ZyXEL
		 * Model: VMG4381-B10A
		 * Model Number: VMG4381-B10A
		 * Serial Number: 96368GW
		 * Primary Device Type: 6-0050f204-1
		 * Device name: VMG4381-B10A
		 * Config methods: Label, Display
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 1c:74:0d:63:ea:5a(on wlp3s0)
	TSF: 5779329748295 usec (66d, 21:22:09)
	freq: 2462
	beacon interval: 100 TUs
	capability: ESS Privacy ShortSlotTime (0x0411)
	signal: -68.00 dBm
	last seen: 6552 ms ago
	Information elements from Probe Response frame:
	SSID: ZyXEL92807
	Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0 
	DS Parameter set: channel 11
	TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
	ERP: Barker_Preamble_Mode
	ERP D4.0: Barker_Preamble_Mode
	RSN:	 * Version: 1
		 * Group cipher: CCMP
		 * Pairwise ciphers: CCMP
		 * Authentication suites: PSK
		 * Capabilities: 16-PTKSA-RC 1-GTKSA-RC (0x000c)
	Extended supported rates: 6.0 9.0 12.0 48.0 
	BSS Load:
		 * station count: 3
		 * channel utilisation: 67/255
		 * available admission capacity: 0 [*32us]
	HT capabilities:
		Capabilities: 0x18ac
			HT20
			SM Power Save disabled
			RX HT20 SGI
			TX STBC
			No RX STBC
			Max AMSDU length: 7935 bytes
			DSSS/CCK HT40
		Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
		Minimum RX AMPDU time spacing: 8 usec (0x06)
		HT RX MCS rate indexes supported: 0-15
		HT TX MCS rate indexes are undefined
	HT operation:
		 * primary channel: 11
		 * secondary channel offset: no secondary
		 * STA channel width: 20 MHz
		 * RIFS: 0
		 * HT protection: nonmember
		 * non-GF present: 1
		 * OBSS non-GF present: 1
		 * dual beacon: 0
		 * dual CTS protection: 0
		 * STBC beacon: 0
		 * L-SIG TXOP Prot: 0
		 * PCO active: 0
		 * PCO phase: 0
	Extended capabilities: BSS Transition
	WPS:	 * Version: 1.0
		 * Wi-Fi Protected Setup State: 2 (Configured)
		 * UUID: b719957c-dc0a-b468-b77f-91ebb907d44e
		 * RF Bands: 0x1
		 * Unknown TLV (0x1049, 6 bytes): 00 37 2a 00 01 20
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS 34:64:a9:86:23:33(on wlp3s0)
	TSF: 2589478707522 usec (29d, 23:17:58)
	freq: 2462
	beacon interval: 100 TUs
	capability: ESS ShortPreamble ShortSlotTime (0x0421)
	signal: -63.00 dBm
	last seen: 6548 ms ago
	Information elements from Probe Response frame:
	SSID: HP-Print-33-ENVY 4500 series
	Supported rates: 1.0 2.0 5.5 6.0 9.0 11.0 12.0 18.0 
	DS Parameter set: channel 11
	TIM: DTIM Count 0 DTIM Period 1 Bitmap Control 0x0 Bitmap[0] 0x0
	ERP: <no flags>
	Extended supported rates: 24.0 36.0 48.0 54.0 
	WMM:	 * Parameter version 1
		 * u-APSD
		 * BE: CW 15-1023, AIFSN 3
		 * BK: CW 15-1023, AIFSN 7
		 * VI: CW 7-15, AIFSN 2, TXOP 3008 usec
		 * VO: CW 3-7, AIFSN 2, TXOP 1504 usec

  reply	other threads:[~2018-05-25 20:39 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-22 17:21 Atheros AR9462 - 5Ghz not working mgreger
2018-05-25 17:06 ` Sedat Dilek
2018-05-25 20:39   ` mgreger [this message]
2018-05-25 20:50   ` mgreger
2018-05-26 14:33   ` mgreger
2018-05-30 14:05   ` mgreger
2018-06-10 23:29     ` mgreger
2018-06-12 18:19       ` mgreger
2018-06-14  4:15         ` mgreger
2018-06-14 20:57           ` Janusz Dziedzic
2018-06-15 13:31             ` mgreger
2018-06-15 16:08               ` Michał Kazior
2018-06-15 16:58                 ` mgreger
2018-06-15 17:23                   ` mgreger
2018-06-17 10:08                     ` Michał Kazior
2018-06-17 14:52                       ` mgreger
2018-06-17 21:31                         ` Tom Psyborg
2018-06-18 13:53                           ` mgreger
2018-06-18 19:22                             ` Arend van Spriel
2018-06-18 20:01                               ` Martin Blumenstingl
2018-06-21 14:01                               ` mgreger
2018-06-21 15:13                                 ` Tom Psyborg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180525203922.QZ7AP.56018.root@dnvrco-web26 \
    --to=mgreger@cinci.rr.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=sedat.dilek@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.