From: dsahern@kernel.org
To: netdev@vger.kernel.org
Cc: roopa@cumulusnetworks.com, David Ahern <dsahern@gmail.com>
Subject: [PATCH net-next 7/7] selftests: fib_tests: Add prefix route tests with metric
Date: Sun, 27 May 2018 08:09:59 -0700 [thread overview]
Message-ID: <20180527151000.30488-8-dsahern@kernel.org> (raw)
In-Reply-To: <20180527151000.30488-1-dsahern@kernel.org>
From: David Ahern <dsahern@gmail.com>
Add tests verifying prefix routes are inserted with expected metric.
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
Signed-off-by: David Ahern <dsahern@gmail.com>
---
tools/testing/selftests/net/fib_tests.sh | 181 ++++++++++++++++++++++++++++++-
1 file changed, 180 insertions(+), 1 deletion(-)
mode change 100755 => 100644 tools/testing/selftests/net/fib_tests.sh
diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh
old mode 100755
new mode 100644
index e7d76fbc36e9..9780c5a2d73f
--- a/tools/testing/selftests/net/fib_tests.sh
+++ b/tools/testing/selftests/net/fib_tests.sh
@@ -6,7 +6,8 @@
ret=0
-TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt"
+# all tests in this script. Can be overridden with -t option
+TESTS="unregister down carrier nexthop ipv6_rt ipv4_rt ipv6_addr_metric ipv4_addr_metric"
VERBOSE=0
PAUSE_ON_FAIL=no
PAUSE=no
@@ -642,6 +643,8 @@ check_route6()
local rc=0
out=$($IP -6 ro ls match ${pfx} | sed -e 's/ pref medium//')
+ [ "${out}" = "${expected}" ] && return 0
+
if [ -z "${out}" ]; then
if [ "$VERBOSE" = "1" ]; then
printf "\nNo route entry found\n"
@@ -911,6 +914,98 @@ ipv6_route_test()
route_cleanup
}
+ip_addr_metric_check()
+{
+ ip addr help 2>&1 | grep -q metric
+ if [ $? -ne 0 ]; then
+ echo "iproute2 command does not support metric for addresses. Skipping test"
+ return 1
+ fi
+
+ return 0
+}
+
+ipv6_addr_metric_test()
+{
+ local rc
+
+ echo
+ echo "IPv6 prefix route tests"
+
+ ip_addr_metric_check || return 1
+
+ setup
+
+ set -e
+ $IP li add dummy1 type dummy
+ $IP li add dummy2 type dummy
+ $IP li set dummy1 up
+ $IP li set dummy2 up
+
+ # default entry is metric 256
+ run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64"
+ run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64"
+ set +e
+
+ check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 256 2001:db8:104::/64 dev dummy2 proto kernel metric 256"
+ log_test $? 0 "Default metric"
+
+ set -e
+ run_cmd "$IP -6 addr flush dev dummy1"
+ run_cmd "$IP -6 addr add dev dummy1 2001:db8:104::1/64 metric 257"
+ set +e
+
+ check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 256 2001:db8:104::/64 dev dummy1 proto kernel metric 257"
+ log_test $? 0 "User specified metric on first device"
+
+ set -e
+ run_cmd "$IP -6 addr flush dev dummy2"
+ run_cmd "$IP -6 addr add dev dummy2 2001:db8:104::2/64 metric 258"
+ set +e
+
+ check_route6 "2001:db8:104::/64 dev dummy1 proto kernel metric 257 2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+ log_test $? 0 "User specified metric on second device"
+
+ run_cmd "$IP -6 addr del dev dummy1 2001:db8:104::1/64 metric 257"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 258"
+ rc=$?
+ fi
+ log_test $rc 0 "Delete of address on first device"
+
+ run_cmd "$IP -6 addr change dev dummy2 2001:db8:104::2/64 metric 259"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+ rc=$?
+ fi
+ log_test $rc 0 "Modify metric of address"
+
+ # verify prefix route removed on down
+ run_cmd "ip netns exec testns sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1"
+ run_cmd "$IP li set dev dummy2 down"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route6 ""
+ rc=$?
+ fi
+ log_test $rc 0 "Prefix route removed on link down"
+
+ # verify prefix route re-inserted with assigned metric
+ run_cmd "$IP li set dev dummy2 up"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route6 "2001:db8:104::/64 dev dummy2 proto kernel metric 259"
+ rc=$?
+ fi
+ log_test $rc 0 "Prefix route with metric on link up"
+
+ $IP li del dummy1
+ $IP li del dummy2
+ cleanup
+}
+
# add route for a prefix, flushing any existing routes first
# expected to be the first step of a test
add_route()
@@ -955,6 +1050,8 @@ check_route()
local rc=0
out=$($IP ro ls match ${pfx})
+ [ "${out}" = "${expected}" ] && return 0
+
if [ -z "${out}" ]; then
if [ "$VERBOSE" = "1" ]; then
printf "\nNo route entry found\n"
@@ -1181,6 +1278,86 @@ ipv4_route_test()
route_cleanup
}
+ipv4_addr_metric_test()
+{
+ local rc
+
+ echo
+ echo "IPv4 prefix route tests"
+
+ ip_addr_metric_check || return 1
+
+ setup
+
+ set -e
+ $IP li add dummy1 type dummy
+ $IP li add dummy2 type dummy
+ $IP li set dummy1 up
+ $IP li set dummy2 up
+
+ # default entry is metric 256
+ run_cmd "$IP addr add dev dummy1 172.16.104.1/24"
+ run_cmd "$IP addr add dev dummy2 172.16.104.2/24"
+ set +e
+
+ check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2"
+ log_test $? 0 "Default metric"
+
+ set -e
+ run_cmd "$IP addr flush dev dummy1"
+ run_cmd "$IP addr add dev dummy1 172.16.104.1/24 metric 257"
+ set +e
+
+ check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257"
+ log_test $? 0 "User specified metric on first device"
+
+ set -e
+ run_cmd "$IP addr flush dev dummy2"
+ run_cmd "$IP addr add dev dummy2 172.16.104.2/24 metric 258"
+ set +e
+
+ check_route "172.16.104.0/24 dev dummy1 proto kernel scope link src 172.16.104.1 metric 257 172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+ log_test $? 0 "User specified metric on second device"
+
+ run_cmd "$IP addr del dev dummy1 172.16.104.1/24 metric 257"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 258"
+ rc=$?
+ fi
+ log_test $rc 0 "Delete of address on first device"
+
+ run_cmd "$IP addr change dev dummy2 172.16.104.2/24 metric 259"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+ rc=$?
+ fi
+ log_test $rc 0 "Modify metric of address"
+
+ # verify prefix route removed on down
+ run_cmd "$IP li set dev dummy2 down"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route ""
+ rc=$?
+ fi
+ log_test $rc 0 "Prefix route removed on link down"
+
+ # verify prefix route re-inserted with assigned metric
+ run_cmd "$IP li set dev dummy2 up"
+ rc=$?
+ if [ $rc -eq 0 ]; then
+ check_route "172.16.104.0/24 dev dummy2 proto kernel scope link src 172.16.104.2 metric 259"
+ rc=$?
+ fi
+ log_test $rc 0 "Prefix route with metric on link up"
+
+ $IP li del dummy1
+ $IP li del dummy2
+ cleanup
+}
+
################################################################################
# usage
@@ -1245,6 +1422,8 @@ do
fib_nexthop_test|nexthop) fib_nexthop_test;;
ipv6_route_test|ipv6_rt) ipv6_route_test;;
ipv4_route_test|ipv4_rt) ipv4_route_test;;
+ ipv6_addr_metric) ipv6_addr_metric_test;;
+ ipv4_addr_metric) ipv4_addr_metric_test;;
help) echo "Test names: $TESTS"; exit 0;;
esac
--
2.11.0
next prev parent reply other threads:[~2018-05-27 15:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-27 15:09 [PATCH net-next 0/7] net: Add address attribute to control metric of prefix route dsahern
2018-05-27 15:09 ` [PATCH net-next 1/7] net/ipv6: Convert ipv6_add_addr to struct ifa6_config dsahern
2018-05-27 15:09 ` [PATCH net-next 2/7] net/ipv6: Pass ifa6_config struct to inet6_addr_add dsahern
2018-05-27 15:09 ` [PATCH net-next 3/7] net/ipv6: Pass ifa6_config struct to inet6_addr_modify dsahern
2018-05-27 15:09 ` [PATCH net-next 4/7] net: Add IFA_RT_PRIORITY address attribute dsahern
2018-05-27 15:09 ` [PATCH net-next 5/7] net/ipv4: Add support for specifying metric of connected routes dsahern
2018-05-27 15:09 ` [PATCH net-next 6/7] net/ipv6: " dsahern
2018-05-27 15:09 ` dsahern [this message]
2018-05-27 15:10 ` [PATCH iproute2-next] ipaddress: Add support for address metric dsahern
2018-05-30 15:22 ` David Ahern
2018-05-29 14:13 ` [PATCH net-next 0/7] net: Add address attribute to control metric of prefix route David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180527151000.30488-8-dsahern@kernel.org \
--to=dsahern@kernel.org \
--cc=dsahern@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=roopa@cumulusnetworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.