From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1164003AbeE1Kyv (ORCPT ); Mon, 28 May 2018 06:54:51 -0400 Received: from mail.kernel.org ([198.145.29.99]:43518 "EHLO mail.kernel.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1163955AbeE1Kyn (ORCPT ); Mon, 28 May 2018 06:54:43 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman , stable@vger.kernel.org, Raghuram Chary J , "David S. Miller" , Sasha Levin Subject: [PATCH 4.14 298/496] lan78xx: Set ASD in MAC_CR when EEE is enabled. Date: Mon, 28 May 2018 12:01:23 +0200 Message-Id: <20180528100332.381146713@linuxfoundation.org> X-Mailer: git-send-email 2.17.0 In-Reply-To: <20180528100319.498712256@linuxfoundation.org> References: <20180528100319.498712256@linuxfoundation.org> User-Agent: quilt/0.65 X-stable: review MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org 4.14-stable review patch. If anyone has any objections, please let me know. ------------------ From: Raghuram Chary J [ Upstream commit e69647a19c870c2f919e4d5023af8a515e8ef25f ] Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/net/usb/lan78xx.c | 10 ++++++++++ 1 file changed, 10 insertions(+) --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -2352,6 +2352,7 @@ static int lan78xx_reset(struct lan78xx_ u32 buf; int ret = 0; unsigned long timeout; + u8 sig; ret = lan78xx_read_reg(dev, HW_CFG, &buf); buf |= HW_CFG_LRST_; @@ -2451,6 +2452,15 @@ static int lan78xx_reset(struct lan78xx_ /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; + + if (dev->chipid == ID_REV_CHIP_ID_7800_) { + ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig); + if (!ret && sig != EEPROM_INDICATOR) { + /* Implies there is no external eeprom. Set mac speed */ + netdev_info(dev->net, "No External EEPROM. Setting MAC Speed\n"); + buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; + } + } ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf);