All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tejaswi Tanikella <tejaswit@codeaurora.org>
To: netdev@vger.kernel.org
Subject: [PATCH net] ipv4: igmp: hold wakelock to prevent delayed reports
Date: Fri, 1 Jun 2018 19:35:41 +0530	[thread overview]
Message-ID: <20180601140532.GA13253@tejaswit-linux.qualcomm.com> (raw)

On receiving a IGMPv2/v3 query, based on max_delay set in the header a
timer is started to send out a response after a random time within
max_delay. If the system then moves into suspend state, Report is
delayed until system wakes up.

In one reported scenario, on arm64 devices, max_delay was set to 10s,
Reports were consistantly delayed if the timer is scheduled after 5 plus
seconds.

Hold wakelock while starting the timer to prevent moving into suspend
state.

Signed-off-by: Tejaswi Tanikella <tejaswit@codeaurora.org>
---
 include/linux/igmp.h |  1 +
 net/ipv4/igmp.c      | 20 ++++++++++++++++++--
 2 files changed, 19 insertions(+), 2 deletions(-)

diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index f823185..9be1c58 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -84,6 +84,7 @@ struct ip_mc_list {
 	};
 	struct ip_mc_list __rcu *next_hash;
 	struct timer_list	timer;
+	struct wakeup_source	*wakeup_src;
 	int			users;
 	refcount_t		refcnt;
 	spinlock_t		lock;
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index b26a81a..c695e2c 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -107,6 +107,9 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #endif
+#ifdef CONFIG_IP_MULTICAST
+#include <linux/pm_wakeup.h>
+#endif
 
 #ifdef CONFIG_IP_MULTICAST
 /* Parameter names and values are taken from igmp-v2-06 draft */
@@ -174,7 +177,13 @@ static int ip_mc_add_src(struct in_device *in_dev, __be32 *pmca, int sfmode,
 
 static void ip_ma_put(struct ip_mc_list *im)
 {
+#ifdef CONFIG_IP_MULTICAST
+	__pm_relax(im->wakeup_src);
+#endif
 	if (refcount_dec_and_test(&im->refcnt)) {
+#ifdef CONFIG_IP_MULTICAST
+		wakeup_source_unregister(im->wakeup_src);
+#endif
 		in_dev_put(im->interface);
 		kfree_rcu(im, rcu);
 	}
@@ -199,8 +208,10 @@ static void ip_ma_put(struct ip_mc_list *im)
 static void igmp_stop_timer(struct ip_mc_list *im)
 {
 	spin_lock_bh(&im->lock);
-	if (del_timer(&im->timer))
+	if (del_timer(&im->timer)) {
+		__pm_relax(im->wakeup_src);
 		refcount_dec(&im->refcnt);
+	}
 	im->tm_running = 0;
 	im->reporter = 0;
 	im->unsolicit_count = 0;
@@ -213,8 +224,10 @@ static void igmp_start_timer(struct ip_mc_list *im, int max_delay)
 	int tv = prandom_u32() % max_delay;
 
 	im->tm_running = 1;
-	if (!mod_timer(&im->timer, jiffies+tv+2))
+	if (!mod_timer(&im->timer, jiffies+tv+2)) {
 		refcount_inc(&im->refcnt);
+		__pm_stay_awake(im->wakeup_src);
+	}
 }
 
 static void igmp_gq_start_timer(struct in_device *in_dev)
@@ -250,6 +263,7 @@ static void igmp_mod_timer(struct ip_mc_list *im, int max_delay)
 			spin_unlock_bh(&im->lock);
 			return;
 		}
+		__pm_relax(im->wakeup_src);
 		refcount_dec(&im->refcnt);
 	}
 	igmp_start_timer(im, max_delay);
@@ -1415,6 +1429,8 @@ void ip_mc_inc_group(struct in_device *in_dev, __be32 addr)
 #ifdef CONFIG_IP_MULTICAST
 	timer_setup(&im->timer, igmp_timer_expire, 0);
 	im->unsolicit_count = net->ipv4.sysctl_igmp_qrv;
+	im->wakeup_src = wakeup_source_create("igmp_wakeup_source");
+	wakeup_source_add(im->wakeup_src);
 #endif
 
 	im->next_rcu = in_dev->mc_list;
-- 
1.9.1

             reply	other threads:[~2018-06-01 14:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-01 14:05 Tejaswi Tanikella [this message]
2018-06-01 14:45 ` [PATCH net] ipv4: igmp: hold wakelock to prevent delayed reports Florian Fainelli
2018-06-04 15:03   ` Tejaswi Tanikella
2018-06-04 15:06 ` David Miller
2018-06-06 14:38   ` Tejaswi Tanikella

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180601140532.GA13253@tejaswit-linux.qualcomm.com \
    --to=tejaswit@codeaurora.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.