From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>,
Jiri Slaby <jslaby@suse.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-serial@vger.kernel.org
Subject: [GIT PULL] TTY/Serial patches for 4.18-rc1
Date: Tue, 5 Jun 2018 20:59:01 +0200 [thread overview]
Message-ID: <20180605185901.GD24892@kroah.com> (raw)
The following changes since commit 6da6c0db5316275015e8cc2959f12a17584aeb64:
Linux v4.17-rc3 (2018-04-29 14:17:42 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git/ tags/tty-4.18-rc1
for you to fetch changes up to 4b4ecd9cb853c14913a3726cfcc60ccda1d2924a:
vt: Perform safe console erase only once (2018-05-25 18:01:16 +0200)
----------------------------------------------------------------
TTY/Serial patches for 4.18-rc1
Here is the big tty/serial driver update for 4.18-rc1.
There's nothing major here, just lots of serial driver updates. Full
details are in the shortlog, nothing anything specific to call out here.
All have been in linux-next for a while with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Colin Ian King (1):
tty: nozomi: fix spelling mistake in macro NOZOMI_STATE_UKNOWN
DaeRyong Jeong (1):
tty: Fix data race in tty_insert_flip_string_fixed_flag
Dan Carpenter (1):
serial/aspeed-vuart: fix a couple mod_timer() calls
Daniel Wagner (1):
serial: sh-sci: Use spin_{try}lock_irqsave instead of open coding version
Dave Martin (1):
tty: pl011: Avoid spuriously stuck-off interrupts
Douglas Anderson (1):
serial: core: Make sure compiler barfs for 16-byte earlycon names
Evan Green (1):
tty: serial: msm_geni_serial: Fix TX infinite loop
Geert Uytterhoeven (2):
serial: sh-sci: Add support for dynamic instances
serial: Remove depends on HAS_DMA in case of platform dependency
Giulio Benetti (1):
tty: fix typo in ASYNCB_FOURPORT comment
Greg Kroah-Hartman (1):
Merge 4.17-rc3 into tty-next
Jeremy Kerr (4):
serial: Introduce UPSTAT_SYNC_FIFO for synchronised FIFOs
serial/8250: export serial8250_read_char
serial/aspeed-vuart: Implement rx throttling
serial/aspeed-vuart: Implement quick throttle mechanism
Jia-Ju Bai (1):
tty: ipwireless: Replace GFP_ATOMIC with GFP_KERNEL in ipwireless_network_create
Joey Pabalinas (2):
tty/nozomi: cleanup DUMP() macro
tty/nozomi: fix inconsistent indentation
John Crispin (1):
tty: serial: drop ATH79 specific SoC symbols
John Garry (1):
serial: 8250_of: Add IO space support
Joshua Scott (1):
serial: 8250_dw: Limit dw8250_tx_wait_empty quirk to armada-38x devices
Karthikeyan Ramasubramanian (8):
tty: serial: qcom_geni_serial: Add comments for clarification
tty: serial: qcom_geni_serial: Cleanup redundant code
tty: serial: qcom_geni_serial: Use min3 to find minimum of 3 values
tty: serial: qcom_geni_serial: Initialize console port statically
tty: serial: qcom_geni_serial: Remove unnecessary memory barrier
tty: serial: qcom_geni_serial: Use iowrite32_rep to write to FIFO
tty: serial: qcom_geni_serial: Return IRQ_NONE for spurious interrupts
tty: serial: qcom_geni_serial: Add early console support
Kurt Kanzenbach (1):
tty: serial: 8250: pass IRQ shared flag to UART ports
Luc Van Oostenryck (1):
tty: n_gsm: fix gsm_mux_net_start_xmit()'s return type
Marek Szyprowski (2):
serial: samsung: fix maxburst parameter for DMA transactions
serial: samsung: check DMA engine capabilities before using DMA mode
Marek Vasut (1):
serial: 8250: Add missing rxtrig_bytes on Altera 16550 UART
Michal Simek (7):
earlycon: Initialize port->uartclk based on clock-frequency property
serial: 8250_early: Setup divider when uartclk is passed
serial: uartps: Remove console_initcall from the driver
serial: uartps: Use dynamic array for console port
serial: uartps: Move cnds_uart_get_port to probe
serial: uartps: Remove static port array
earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon
Miquel Raynal (1):
serial: mvebu-uart: add suspend/resume support
Nicolas Pitre (1):
vt: Perform safe console erase only once
Pascal Huerst (2):
tty: serial: msm_serial: Add support for suspend/resume
tty: serial: msm_serial: Add __maybe_unused to suspend/resume callbacks
Phil Edworthy (1):
serial: 8250_dw: Fix runtime PM handling
Sebastian Andrzej Siewior (1):
tty/serial: atmel: use port->name as name in request_irq()
Sebastian Reichel (4):
serial: imx: cleanup imx_uart_disable_dma()
serial: imx: dma_unmap_sg buffers on shutdown
serial: imx: drop CTS/RTS handling from shutdown
serial: imx: disable UCR4_OREN on shutdown
Stefan Potyra (1):
sc16is7xx: Check for an error when the clock is enabled.
Tony Lindgren (1):
serial: 8250: omap: Fix idling of clocks for unused uarts
Ulrich Hecht (1):
serial: sh-sci: Support for HSCIF RX sampling point adjustment
Vignesh R (1):
serial: 8250: omap: Provide ability to enable/disable UART as wakeup source
Wolfram Sang (1):
tty: serial: simplify getting .drvdata
Documentation/admin-guide/kernel-parameters.txt | 6 +
arch/arm/boot/dts/armada-38x.dtsi | 4 +-
drivers/tty/ipwireless/network.c | 2 +-
drivers/tty/n_gsm.c | 2 +-
drivers/tty/nozomi.c | 104 +++++++-------
drivers/tty/pty.c | 3 +
drivers/tty/serial/8250/8250_aspeed_vuart.c | 125 +++++++++++++++++
drivers/tty/serial/8250/8250_dw.c | 35 ++++-
drivers/tty/serial/8250/8250_early.c | 2 +-
drivers/tty/serial/8250/8250_of.c | 63 +++++----
drivers/tty/serial/8250/8250_omap.c | 27 +++-
drivers/tty/serial/8250/8250_port.c | 6 +-
drivers/tty/serial/Kconfig | 8 +-
drivers/tty/serial/amba-pl011.c | 16 +++
drivers/tty/serial/atmel_serial.c | 5 +-
drivers/tty/serial/earlycon.c | 5 +-
drivers/tty/serial/imx.c | 43 +++---
drivers/tty/serial/msm_serial.c | 23 +++
drivers/tty/serial/mvebu-uart.c | 64 +++++++++
drivers/tty/serial/qcom_geni_serial.c | 177 ++++++++++++++++--------
drivers/tty/serial/samsung.c | 40 ++++--
drivers/tty/serial/sc16is7xx.c | 5 +-
drivers/tty/serial/serial_core.c | 4 +-
drivers/tty/serial/sh-sci.c | 81 +++++++----
drivers/tty/serial/sh-sci.h | 4 +
drivers/tty/serial/st-asc.c | 6 +-
drivers/tty/serial/xilinx_uartps.c | 108 ++++++---------
drivers/tty/vt/vt.c | 16 +--
include/linux/serial_8250.h | 1 +
include/linux/serial_core.h | 4 +-
include/uapi/linux/tty_flags.h | 2 +-
31 files changed, 694 insertions(+), 297 deletions(-)
reply other threads:[~2018-06-05 18:59 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180605185901.GD24892@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=sfr@canb.auug.org.au \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.