From: "Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
To: git@vger.kernel.org
Cc: "Junio C Hamano" <gitster@pobox.com>,
dstolee@microsoft.com, git@jeffhostetler.com, peff@peff.net,
johannes.schindelin@gmx.de, jrnieder@gmail.com,
"Linus Torvalds" <torvalds@linux-foundation.org>,
"Ævar Arnfjörð Bjarmason" <avarab@gmail.com>
Subject: [RFC PATCH 0/2] unconditional O(1) SHA-1 abbreviation
Date: Wed, 6 Jun 2018 10:27:17 +0000 [thread overview]
Message-ID: <20180606102719.27145-1-avarab@gmail.com> (raw)
In-Reply-To: <87lgbsz61p.fsf@evledraar.gmail.com>
On Wed, Jun 06 2018, Ævar Arnfjörð Bjarmason wrote:
> On Mon, Jan 08 2018, Derrick Stolee wrote:
>
>> On 1/7/2018 5:42 PM, Ævar Arnfjörð Bjarmason wrote:
>>>
>>> On Sun, Jan 07 2018, Derrick Stolee jotted:
>>>
>>>> git log --oneline --raw --parents
>>>>
>>>> Num Packs | Before MIDX | After MIDX | Rel % | 1 pack %
>>>> ----------+-------------+------------+--------+----------
>>>> 1 | 35.64 s | 35.28 s | -1.0% | -1.0%
>>>> 24 | 90.81 s | 40.06 s | -55.9% | +12.4%
>>>> 127 | 257.97 s | 42.25 s | -83.6% | +18.6%
>>>>
>>>> The last column is the relative difference between the MIDX-enabled repo
>>>> and the single-pack repo. The goal of the MIDX feature is to present the
>>>> ODB as if it was fully repacked, so there is still room for improvement.
>>>>
>>>> Changing the command to
>>>>
>>>> git log --oneline --raw --parents --abbrev=40
>>>>
>>>> has no observable difference (sub 1% change in all cases). This is likely
>>>> due to the repack I used putting commits and trees in a small number of
>>>> packfiles so the MRU cache workes very well. On more naturally-created
>>>> lists of packfiles, there can be up to 20% improvement on this command.
>>>>
>>>> We are using a version of this patch with an upcoming release of GVFS.
>>>> This feature is particularly important in that space since GVFS performs
>>>> a "prefetch" step that downloads a pack of commits and trees on a daily
>>>> basis. These packfiles are placed in an alternate that is shared by all
>>>> enlistments. Some users have 150+ packfiles and the MRU misses and
>>>> abbreviation computations are significant. Now, GVFS manages the MIDX file
>>>> after adding new prefetch packfiles using the following command:
>>>>
>>>> git midx --write --update-head --delete-expired --pack-dir=<alt>
>>>
>>> (Not a critique of this, just a (stupid) question)
>>>
>>> What's the practical use-case for this feature? Since it doesn't help
>>> with --abbrev=40 the speedup is all in the part that ensures we don't
>>> show an ambiguous SHA-1.
>>
>> The point of including the --abbrev=40 is to point out that object
>> lookups do not get slower with the MIDX feature. Using these "git log"
>> options is a good way to balance object lookups and abbreviations with
>> object parsing and diff machinery.[...]
>
> [snip]
>
>> [...]And while the public data shape I shared did not show a
>> difference, our private testing of the Windows repository did show a
>> valuable improvement when isolating to object lookups and ignoring
>> abbreviation calculations.
>
> Replying to this old thread since I see you're prepearing the MIDX for
> submission again and this seemed like the best venue.
>
> Your WIP branch (github.com/git/derrickstolee/midx/upstream) still only
> references the speedups in abbreviation calculations, but here you
> allude to other improvements. It would be very nice to have some summary
> of that in docs / commit messages when you submit this.
>
> I've been meaning to get around to submitting something like I mentioned
> in https://public-inbox.org/git/87efn0bkls.fsf@evledraar.gmail.com/
> i.e. a way to expand the abbrev mode to not check disambiguations, which
> would look something like:
>
> core.abbrev = 20
> core.validateAbbrev = false
>
> Or:
>
> core.abbrev = +2
> core.validateAbbrev = false
>
> So, using the example from the above referenced E-Mail +2 would make
> linux.git emit hashes of 14 characters, without any abbreviation
> checking (just trusting in statistics to work in your favor).
>
> As noted by JS in this thread that wouldn't be acceptable for your
> use-case, but there's plenty of people (including me) who'd appreciate
> the speedup without being a 100% sure we're emitting unambiguous hashes,
> since that trade-off is better than time spent generating another index
> on-disk. So I see it as a complimentary & orthogonal feature.
>
> But with that implemented I wouldn't get any benefit from things that
> use the MIDX that aren't abbreviations, so what are those?
I won't have time to finish this today, but it's already in a shape
that I think is useful for discussion to see what others think.
I still need to make this be supported by --abbrev=* and have
e.g. --abbrev=+2 work. I got as far as this with that:
diff --git a/parse-options-cb.c b/parse-options-cb.c
index 0f9f311a7a..7cc9d3dfe6 100644
--- a/parse-options-cb.c
+++ b/parse-options-cb.c
@@ -16,13 +16,23 @@ int parse_opt_abbrev_cb(const struct option *opt, const char *arg, int unset)
if (!arg) {
v = unset ? 0 : DEFAULT_ABBREV;
} else {
+ const char *origarg = arg;
v = strtol(arg, (char **)&arg, 10);
if (*arg)
return opterror(opt, "expects a numerical value", 0);
- if (v && v < MINIMUM_ABBREV)
+ if (*origarg == '+' || *origarg == '-') {
+ if (v == 0) {
+ return opterror(opt, "relative abbrev must be non-zero", 0);
+ } else {
+ default_abbrev_relative = v;
+ v = -1;
+ }
+ } else if (v && v < MINIMUM_ABBREV) {
v = MINIMUM_ABBREV;
- else if (v > 40)
+ } else if (v > 40) {
v = 40;
+ }
}
*(int *)(opt->value) = v;
return 0;
But e.g. blame would print 40 character SHA-1s on +2, I didn't have
time to dig into why.
This'll also need tests, I haven't added any yet, and finally it's
probably a good idea to split off the core.abbrev=[+-]NUM feature into
a seperate patch from core.validateAbbrev, although with my 2/2 the
two can be used in isolation, or together.
Ævar Arnfjörð Bjarmason (2):
config.c: use braces on multiple conditional arms
sha1-name: add core.validateAbbrev & relative core.abbrev
Documentation/config.txt | 46 ++++++++++++++++++++++++++++++++++++++++
cache.h | 2 ++
config.c | 18 ++++++++++++++--
environment.c | 2 ++
sha1-name.c | 15 +++++++++++++
5 files changed, 81 insertions(+), 2 deletions(-)
--
2.17.0.290.gded63e768a
next prev parent reply other threads:[~2018-06-06 10:27 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-07 18:14 [RFC PATCH 00/18] Multi-pack index (MIDX) Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 01/18] docs: Multi-Pack Index (MIDX) Design Notes Derrick Stolee
2018-01-08 19:32 ` Jonathan Tan
2018-01-08 20:35 ` Derrick Stolee
2018-01-08 22:06 ` Jonathan Tan
2018-01-07 18:14 ` [RFC PATCH 02/18] midx: specify midx file format Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 03/18] midx: create core.midx config setting Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 04/18] midx: write multi-pack indexes for an object list Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 05/18] midx: create midx builtin with --write mode Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 06/18] midx: add t5318-midx.sh test script Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 07/18] midx: teach midx --write to update midx-head Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 08/18] midx: teach git-midx to read midx file details Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 09/18] midx: find details of nth object in midx Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 10/18] midx: use existing midx when writing Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 11/18] midx: teach git-midx to clear midx files Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 12/18] midx: teach git-midx to delete expired files Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 13/18] t5318-midx.h: confirm git actions are stable Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 14/18] midx: load midx files when loading packs Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 15/18] midx: use midx for approximate object count Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 16/18] midx: nth_midxed_object_oid() and bsearch_midx() Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 17/18] sha1_name: use midx for abbreviations Derrick Stolee
2018-01-07 18:14 ` [RFC PATCH 18/18] packfile: use midx for object loads Derrick Stolee
2018-01-07 22:42 ` [RFC PATCH 00/18] Multi-pack index (MIDX) Ævar Arnfjörð Bjarmason
2018-01-08 0:08 ` Derrick Stolee
2018-01-08 10:20 ` Jeff King
2018-01-08 10:27 ` Jeff King
2018-01-08 12:28 ` Ævar Arnfjörð Bjarmason
2018-01-08 13:43 ` Johannes Schindelin
2018-01-09 6:50 ` Jeff King
2018-01-09 13:05 ` Johannes Schindelin
2018-01-09 19:51 ` Stefan Beller
2018-01-09 20:12 ` Junio C Hamano
2018-01-09 20:16 ` Stefan Beller
2018-01-09 21:31 ` Junio C Hamano
2018-01-10 17:05 ` Johannes Schindelin
2018-01-10 10:57 ` Jeff King
2018-01-08 13:43 ` Derrick Stolee
2018-01-09 7:12 ` Jeff King
2018-01-08 11:43 ` Ævar Arnfjörð Bjarmason
2018-06-06 8:13 ` Ævar Arnfjörð Bjarmason
2018-06-06 10:27 ` Ævar Arnfjörð Bjarmason [this message]
2018-06-06 10:27 ` [RFC PATCH 1/2] config.c: use braces on multiple conditional arms Ævar Arnfjörð Bjarmason
2018-06-06 10:27 ` [RFC PATCH 2/2] sha1-name: add core.validateAbbrev & relative core.abbrev Ævar Arnfjörð Bjarmason
2018-06-06 12:04 ` Christian Couder
2018-06-06 11:24 ` [RFC PATCH 00/18] Multi-pack index (MIDX) Derrick Stolee
2018-01-10 18:25 ` Martin Fick
2018-01-10 19:39 ` Derrick Stolee
2018-01-10 21:01 ` Martin Fick
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606102719.27145-1-avarab@gmail.com \
--to=avarab@gmail.com \
--cc=dstolee@microsoft.com \
--cc=git@jeffhostetler.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=johannes.schindelin@gmx.de \
--cc=jrnieder@gmail.com \
--cc=peff@peff.net \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.