Re: [PATCH v6 3/4] dt-bindings: power: supply: qcom_bms: Add bindings

[Matthias Kaehlcke <mka@chromium.org>]

(sorry if you receive two variants of this mail, I sent one earlier
today but for some reason it didn't make it to the lists)

On Wed, Jun 13, 2018 at 05:06:24PM +0100, Craig Tatlor wrote:
> Add bindings for the Qualcomm Battery Monitoring system.
> 
> Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
> ---
> 
> * Changes from v5:
>   Mentions which values are 8 bit.
> 
> * Changes from v4:
>   Uses proper units and expands some definitions,
>   along with changing vadc@ to adc@.
>  .../bindings/power/supply/qcom_bms.txt        | 92 +++++++++++++++++++
>  1 file changed, 92 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/qcom_bms.txt b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> new file mode 100644
> index 000000000000..9a29a2eb9f04
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/supply/qcom_bms.txt
> @@ -0,0 +1,92 @@
> +Qualcomm Battery Monitoring System
> +
> +The Qualcomm Battery Monitoring System is found inside of Qualcomm PM8941
> +PMICs. It provides open circuit voltage (OCV) and coulomb counter registers
> +that allow the OS to infer a capacity level.
> +
> +Required properties:
> +- compatible:                   Should contain "qcom,pm8941-bms".
> +- reg:                          Specifies the SPMI address and length of the
> +				controller's registers.
> +- interrupts:                   OCV threshold interrupt.
> +- io-channels:                  Should contain IIO channel specifier for the
> +				ADC channel that reports battery temperature.
> +- io-channel-names:             Should contain "temp".
> +- qcom,fcc-temp-legend-celcius: An 8 bit array containing the temperature,
> +				in degC, for each column of the full charge
> +				capacity lookup table.

s/celcius/celsius/

same for qcom,ocv-temp-legend-celcius

> +- qcom,fcc-lut-microamp-hours:  An array of full charge capacity values in uah,
> +				one entry for each temperature defined in in

nit: s/uah/uAh/

Thanks

Matthias