All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ivan Gorinov <ivan.gorinov@intel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] x86: Add 64-bit setjmp/longjmp implementation
Date: Wed, 13 Jun 2018 17:36:26 -0700	[thread overview]
Message-ID: <20180614003626.GA40478@intel.com> (raw)
In-Reply-To: <6dec0e10-2920-3b9a-2eac-e92590dbcca0@gmx.de>

On Tue, Jun 12, 2018 at 05:57:34PM +0200, Heinrich Schuchardt wrote:
> On 06/06/2018 08:28 PM, Ivan Gorinov wrote:
> > Add setjmp/longjmp functions for x86_64.
> > The FPU control word and MXCSR control bits are preserved across calls.
> 
> With this patch
> 
> make mrproper && make qemu-x86_64_defconfig && make -j6
> 
> produces
> 
> arch/x86/cpu/built-in.o: In function `car_init':
> arch/x86/cpu/qemu/car.S:25: undefined reference to `car_init_ret'
> 
> The error does not occur without this patch.
> 
> The missing symbol is defined in
> arch/x86/cpu/start.S:98:car_init_ret:
> but it is not defined in
> arch/x86/cpu/start64.S
> 
> The following patch helps:
> 
> [PATCH 1/1] x86: qemu: do not build car.o with start64.o
> https://lists.denx.de/pipermail/u-boot/2018-June/331440.html

Thank you! Now it builds.

> But bootefi selftest with your patch leads to an immediate reset of the
> qemu-x86_64 board.

Reproduced the qemu-x86_64 reset.
The "info registers" command shows CR0.MP = 0.
Setting it in 64-bit startup code did not help.
I will try to fix that.

On a 64-bit Minnowboard configuration, bootefi works without reset.

> 
> Best regards
> 
> Heinrich
> 
> > 
> > Signed-off-by: Ivan Gorinov <ivan.gorinov@intel.com>
> > ---
> >  arch/x86/cpu/x86_64/setjmp.S  | 66 +++++++++++++++++++++++++++++++++++++++++++
> >  arch/x86/cpu/x86_64/setjmp.c  | 19 -------------
> >  arch/x86/include/asm/setjmp.h | 19 +++++++++++++
> >  3 files changed, 85 insertions(+), 19 deletions(-)
> >  create mode 100644 arch/x86/cpu/x86_64/setjmp.S
> >  delete mode 100644 arch/x86/cpu/x86_64/setjmp.c
> > 
> > diff --git a/arch/x86/cpu/x86_64/setjmp.S b/arch/x86/cpu/x86_64/setjmp.S
> > new file mode 100644
> > index 0000000..ef61a4a
> > --- /dev/null
> > +++ b/arch/x86/cpu/x86_64/setjmp.S
> > @@ -0,0 +1,66 @@
> > +/*
> > + * Copyright (C) 2018 Intel Corporation
> > + *
> > + * SPDX-License-Identifier: GPL-2.0+
> > + *
> > + * See arch/x86/include/asm/setjmp.h for jmp_buf format
> > + */
> > +
> > +#include <linux/linkage.h>
> > +
> > +.text
> > +.align 8
> > +
> > +ENTRY(setjmp)
> > +
> > +	pop	%rcx
> > +	movq	%rcx, (%rdi)	/* Return address */
> > +	movq	%rsp, 8 (%rdi)
> > +	movq	%rbp, 16 (%rdi)
> > +	movq	%rbx, 24 (%rdi)
> > +	movq	%r12, 32 (%rdi)
> > +	movq	%r13, 40 (%rdi)
> > +	movq	%r14, 48 (%rdi)
> > +	movq	%r15, 56 (%rdi)
> > +	fnstcw	64 (%rdi)
> > +	stmxcsr	68 (%rdi)
> > +	xorq	%rax, %rax	/* Direct invocation returns 0 */
> > +	jmpq	*%rcx
> > +
> > +ENDPROC(setjmp)
> > +
> > +.align 8
> > +
> > +ENTRY(longjmp)
> > +
> > +	subq	$8, %rsp
> > +
> > +/* Restore the control bits of MXCSR */
> > +
> > +	stmxcsr	(%rsp)
> > +	movl	$0x3f, %eax
> > +	andl	%eax, (%rsp)
> > +	notl	%eax
> > +	andl	68 (%rdi), %eax
> > +	orl	%eax, (%rsp)
> > +	ldmxcsr	(%rsp)
> > +
> > +	fldcw	64 (%rdi)
> > +
> > +	movq	(%rdi), %rcx	/* Return address */
> > +	movq	8 (%rdi), %rsp
> > +	movq	16 (%rdi), %rbp
> > +	movq	24 (%rdi), %rbx
> > +	movq	32 (%rdi), %r12
> > +	movq	40 (%rdi), %r13
> > +	movq	48 (%rdi), %r14
> > +	movq	56 (%rdi), %r15
> > +
> > +	movq	%rsi, %rax	/* Value to be returned by setjmp() */
> > +	testq	%rax, %rax	/* cannot be 0 in this case */
> > +	jnz	1f
> > +	incq	%rax		/* Return 1 instead */
> > +1:
> > +	jmpq	*%rcx
> > +
> > +ENDPROC(longjmp)
> > diff --git a/arch/x86/cpu/x86_64/setjmp.c b/arch/x86/cpu/x86_64/setjmp.c
> > deleted file mode 100644
> > index 5d4a74a..0000000
> > --- a/arch/x86/cpu/x86_64/setjmp.c
> > +++ /dev/null
> > @@ -1,19 +0,0 @@
> > -// SPDX-License-Identifier: GPL-2.0+
> > -/*
> > - * Copyright (c) 2016 Google, Inc
> > - */
> > -
> > -#include <common.h>
> > -#include <asm/setjmp.h>
> > -
> > -int setjmp(struct jmp_buf_data *jmp_buf)
> > -{
> > -	printf("WARNING: setjmp() is not supported\n");
> > -
> > -	return 0;
> > -}
> > -
> > -void longjmp(struct jmp_buf_data *jmp_buf, int val)
> > -{
> > -	printf("WARNING: longjmp() is not supported\n");
> > -}
> > diff --git a/arch/x86/include/asm/setjmp.h b/arch/x86/include/asm/setjmp.h
> > index f25975f..eae33fb 100644
> > --- a/arch/x86/include/asm/setjmp.h
> > +++ b/arch/x86/include/asm/setjmp.h
> > @@ -8,6 +8,23 @@
> >  #ifndef __setjmp_h
> >  #define __setjmp_h
> >  
> > +#ifdef CONFIG_X86_64
> > +
> > +struct jmp_buf_data {
> > +	unsigned long __rip;
> > +	unsigned long __rsp;
> > +	unsigned long __rbp;
> > +	unsigned long __rbx;
> > +	unsigned long __r12;
> > +	unsigned long __r13;
> > +	unsigned long __r14;
> > +	unsigned long __r15;
> > +	unsigned int __fcw;
> > +	unsigned int __mxcsr;
> > +};
> > +
> > +#else
> > +
> >  struct jmp_buf_data {
> >  	unsigned int __ebx;
> >  	unsigned int __esp;
> > @@ -17,6 +34,8 @@ struct jmp_buf_data {
> >  	unsigned int __eip;
> >  };
> >  
> > +#endif
> > +
> >  int setjmp(struct jmp_buf_data *jmp_buf);
> >  void longjmp(struct jmp_buf_data *jmp_buf, int val);
> >  
> > 

  reply	other threads:[~2018-06-14  0:36 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-06 18:28 [U-Boot] [PATCH v2] x86: Add 64-bit setjmp/longjmp implementation Ivan Gorinov
2018-06-12 15:57 ` Heinrich Schuchardt
2018-06-14  0:36   ` Ivan Gorinov [this message]
2018-06-14 17:15     ` Ivan Gorinov
2018-06-14 17:49       ` Alexander Graf
2018-06-19  8:02 ` Bin Meng
  -- strict thread matches above, loose matches on Subject: below --
2018-06-06 18:27 Ivan Gorinov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180614003626.GA40478@intel.com \
    --to=ivan.gorinov@intel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.