[PATCH] ARM: dts: imx53-qsb: Let the codec control MCLK pinctrl

[shawnguo@kernel.org (Shawn Guo)]

On Mon, Jun 04, 2018 at 09:56:49PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@nxp.com>
> 
> sgtl5000 codec needs MCLK clock to be present so that it can
> successfully read/write via I2C.
> 
> In the case of imx53-qsb, MCLK is provided via
> MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK pad. 
> 
> Move the MCLK pinctrl from hog group to the codec group, so that the
> codec clock can be present prior to reading the codec ID.

Are you saying that pins in hog group hasn't been set up yet when codec
driver probes?

Shawn

> 
> This avoids the following sgtl5000 probe error:
> 
> sgtl5000 1-000a: Error reading chip id -6
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
> ---
>  arch/arm/boot/dts/imx53-qsb-common.dtsi | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> index ef7658a..7423d46 100644
> --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi
> +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi
> @@ -153,7 +153,6 @@
>  	imx53-qsb {
>  		pinctrl_hog: hoggrp {
>  			fsl,pins = <
> -				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000
>  				MX53_PAD_GPIO_8__GPIO1_8          0x80000000
>  				MX53_PAD_PATA_DATA14__GPIO2_14    0x80000000
>  				MX53_PAD_PATA_DATA15__GPIO2_15    0x80000000
> @@ -180,6 +179,12 @@
>  			>;
>  		};
>  
> +		pinctrl_codec: codecgrp {
> +			fsl,pins = <
> +				MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK	0x1c4
> +			>;
> +		};
> +
>  		pinctrl_esdhc1: esdhc1grp {
>  			fsl,pins = <
>  				MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
> @@ -310,6 +315,8 @@
>  	sgtl5000: codec at a {
>  		compatible = "fsl,sgtl5000";
>  		reg = <0x0a>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_codec>;
>  		#sound-dai-cells = <0>;
>  		VDDA-supply = <&reg_3p2v>;
>  		VDDIO-supply = <&reg_3p2v>;
> -- 
> 2.7.4
>