All of lore.kernel.org
 help / color / mirror / Atom feed
From: Can Guo <cang@codeaurora.org>
To: subhashj@codeaurora.org, asutoshd@codeaurora.org,
	vivek.gautam@codeaurora.org, mgautam@codeaurora.org,
	kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, Can Guo <cang@codeaurora.org>
Subject: [PATCH v7 2/4] phy: General struct and field cleanup
Date: Tue, 19 Jun 2018 16:36:45 +0800	[thread overview]
Message-ID: <20180619083647.10116-3-cang@codeaurora.org> (raw)
In-Reply-To: <20180619083647.10116-1-cang@codeaurora.org>

Move MSM8996 specific PHY vreg list struct name to a genernal one as it is
used by all PHYs. Add a specific field to handle dual lane situation.

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 25 ++++++++++++++-----------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index ccb8578..9be9754 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -649,6 +649,8 @@ struct qmp_phy_cfg {
 
 	/* true, if PHY has a separate DP_COM control block */
 	bool has_phy_dp_com_ctrl;
+	/* true, if PHY has secondary tx/rx lanes to be configured */
+	bool is_dual_lane_phy;
 	/* Register offset of secondary tx/rx lanes for USB DP combo PHY */
 	unsigned int tx_b_lane_offset;
 	unsigned int rx_b_lane_offset;
@@ -758,7 +760,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 };
 
 /* list of regulators */
-static const char * const msm8996_phy_vreg_l[] = {
+static const char * const qmp_phy_vreg_l[] = {
 	"vdda-phy", "vdda-pll",
 };
 
@@ -778,8 +780,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
 	.reset_list		= msm8996_pciephy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_pciephy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= pciephy_regs_layout,
 
 	.start_ctrl		= PCS_START | PLL_READY_GATE_EN,
@@ -809,8 +811,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.num_clks		= ARRAY_SIZE(msm8996_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= usb3phy_regs_layout,
 
 	.start_ctrl		= SERDES_START | PCS_START,
@@ -870,8 +872,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout,
 
 	.start_ctrl		= SERDES_START | PCS_START,
@@ -883,6 +885,7 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.pwrdn_delay_max	= POWER_DOWN_DELAY_US_MAX,
 
 	.has_phy_dp_com_ctrl	= true,
+	.is_dual_lane_phy	= true,
 	.tx_b_lane_offset	= 0x400,
 	.rx_b_lane_offset	= 0x400,
 };
@@ -903,8 +906,8 @@ static inline void qphy_clrbits(void __iomem *base, u32 offset, u32 val)
 	.num_clks		= ARRAY_SIZE(qmp_v3_phy_clk_l),
 	.reset_list		= msm8996_usb3phy_reset_l,
 	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
-	.vreg_list		= msm8996_phy_vreg_l,
-	.num_vregs		= ARRAY_SIZE(msm8996_phy_vreg_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 	.regs			= qmp_v3_usb3phy_regs_layout,
 
 	.start_ctrl		= SERDES_START | PCS_START,
@@ -1116,12 +1119,12 @@ static int qcom_qmp_phy_init(struct phy *phy)
 	/* Tx, Rx, and PCS configurations */
 	qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num);
 	/* Configuration for other LANE for USB-DP combo PHY */
-	if (cfg->has_phy_dp_com_ctrl)
+	if (cfg->is_dual_lane_phy)
 		qcom_qmp_phy_configure(tx + cfg->tx_b_lane_offset, cfg->regs,
 				       cfg->tx_tbl, cfg->tx_tbl_num);
 
 	qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num);
-	if (cfg->has_phy_dp_com_ctrl)
+	if (cfg->is_dual_lane_phy)
 		qcom_qmp_phy_configure(rx + cfg->rx_b_lane_offset, cfg->regs,
 				       cfg->rx_tbl, cfg->rx_tbl_num);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

  parent reply	other threads:[~2018-06-19  8:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-19  8:36 [PATCH v7 0/4] Support for Qualcomm UFS QMP PHY on SDM845 Can Guo
2018-06-19  8:36 ` [PATCH v7 1/4] phy: Update PHY power control sequence Can Guo
2018-06-28  3:49   ` Manu Gautam
2018-07-02 17:00   ` Vivek Gautam
2018-07-25 20:26     ` Evan Green
2018-06-19  8:36 ` Can Guo [this message]
2018-06-27 20:17   ` [PATCH v7 2/4] phy: General struct and field cleanup Evan Green
2018-06-28  3:48   ` Manu Gautam
2018-07-02  6:42   ` Vivek Gautam
2018-06-19  8:36 ` [PATCH v7 3/4] phy: Add QMP phy based UFS phy support for sdm845 Can Guo
2018-06-27 20:17   ` Evan Green
2018-06-27 20:17     ` Evan Green
2018-07-06  8:01     ` cang
2018-06-28  3:46   ` Manu Gautam
2018-06-19  8:36 ` [PATCH v7 4/4] dt-bindings: phy-qcom-qmp: Add UFS phy compatible string " Can Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180619083647.10116-3-cang@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=asutoshd@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mgautam@codeaurora.org \
    --cc=robh+dt@kernel.org \
    --cc=subhashj@codeaurora.org \
    --cc=vivek.gautam@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.