From: Charles Keepax <ckeepax@opensource.cirrus.com>
To: <broonie@kernel.org>, <hias@horus.com>
Cc: <lgirdwood@gmail.com>, <linus.walleij@linaro.org>,
<patches@opensource.cirrus.com>, <linux-kernel@vger.kernel.org>
Subject: [PATCH] regulator: arizona-ldo1: Use correct device to get enable GPIO
Date: Tue, 19 Jun 2018 10:32:45 +0100 [thread overview]
Message-ID: <20180619093245.1261-1-ckeepax@opensource.cirrus.com> (raw)
Currently the enable GPIO is being looked up on the regulator
device itself but that does not have its own DT node, this causes
the lookup to fail and the regulator not to get its GPIO. The DT
node is shared across the whole MFD and as such the lookup needs
to happen on that parent device. Moving the lookup to the parent
device also means devres can no longer be used as the life time
would attach to the wrong device.
Fixes: e1739e86f0cb ("regulator: arizona-ldo1: Look up a descriptor and pass to the core")
Reported-by: Matthias Reichl <hias@horus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
---
Apologies for missing this again, we should have caught
this in our testing and thanks for reporting it.
Thanks,
Charles
drivers/regulator/arizona-ldo1.c | 27 ++++++++++++++++++++++++---
1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index f6d6a4ad9e8a..a981896c056a 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -36,6 +36,8 @@ struct arizona_ldo1 {
struct regulator_consumer_supply supply;
struct regulator_init_data init_data;
+
+ struct gpio_desc *ena_gpiod;
};
static int arizona_ldo1_hc_list_voltage(struct regulator_dev *rdev,
@@ -253,12 +255,17 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
}
}
- /* We assume that high output = regulator off */
- config.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, "wlf,ldoena",
- GPIOD_OUT_HIGH);
+ /* We assume that high output = regulator off
+ * Don't use devm, since we need to get against the parent device
+ * so clean up would happen at the wrong time
+ */
+ config.ena_gpiod = gpiod_get_optional(parent_dev, "wlf,ldoena",
+ GPIOD_OUT_HIGH);
if (IS_ERR(config.ena_gpiod))
return PTR_ERR(config.ena_gpiod);
+ ldo1->ena_gpiod = config.ena_gpiod;
+
if (pdata->init_data)
config.init_data = pdata->init_data;
else
@@ -276,6 +283,9 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
of_node_put(config.of_node);
if (IS_ERR(ldo1->regulator)) {
+ if (config.ena_gpiod)
+ gpiod_put(config.ena_gpiod);
+
ret = PTR_ERR(ldo1->regulator);
dev_err(&pdev->dev, "Failed to register LDO1 supply: %d\n",
ret);
@@ -334,8 +344,19 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
return ret;
}
+static int arizona_ldo1_remove(struct platform_device *pdev)
+{
+ struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
+
+ if (ldo1->ena_gpiod)
+ gpiod_put(ldo1->ena_gpiod);
+
+ return 0;
+}
+
static struct platform_driver arizona_ldo1_driver = {
.probe = arizona_ldo1_probe,
+ .remove = arizona_ldo1_remove,
.driver = {
.name = "arizona-ldo1",
},
--
2.11.0
next reply other threads:[~2018-06-19 9:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-19 9:32 Charles Keepax [this message]
2018-06-19 12:24 ` [PATCH] regulator: arizona-ldo1: Use correct device to get enable GPIO Matthias Reichl
2018-06-19 14:07 ` Charles Keepax
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180619093245.1261-1-ckeepax@opensource.cirrus.com \
--to=ckeepax@opensource.cirrus.com \
--cc=broonie@kernel.org \
--cc=hias@horus.com \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.