All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johannes Weiner <hannes@cmpxchg.org>
To: Michal Hocko <mhocko@kernel.org>
Cc: linux-mm@kvack.org, Greg Thelen <gthelen@google.com>,
	Shakeel Butt <shakeelb@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Michal Hocko <mhocko@suse.com>
Subject: Re: [RFC PATCH] memcg, oom: move out_of_memory back to the charge path
Date: Wed, 20 Jun 2018 11:18:12 -0400	[thread overview]
Message-ID: <20180620151812.GA2441@cmpxchg.org> (raw)
In-Reply-To: <20180620103736.13880-1-mhocko@kernel.org>

On Wed, Jun 20, 2018 at 12:37:36PM +0200, Michal Hocko wrote:
> From: Michal Hocko <mhocko@suse.com>
> 
> 3812c8c8f395 ("mm: memcg: do not trap chargers with full callstack on OOM")
> has changed the ENOMEM semantic of memcg charges. Rather than invoking
> the oom killer from the charging context it delays the oom killer to the
> page fault path (pagefault_out_of_memory). This in turn means that many
> users (e.g. slab or g-u-p) will get ENOMEM when the corresponding memcg
> hits the hard limit and the memcg is is OOM. This is behavior is
> inconsistent with !memcg case where the oom killer is invoked from the
> allocation context and the allocator keeps retrying until it succeeds.
> 
> The difference in the behavior is user visible. mmap(MAP_POPULATE) might
> result in not fully populated ranges while the mmap return code doesn't
> tell that to the userspace. Random syscalls might fail with ENOMEM etc.
> 
> The primary motivation of the different memcg oom semantic was the
> deadlock avoidance. Things have changed since then, though. We have
> an async oom teardown by the oom reaper now and so we do not have to
> rely on the victim to tear down its memory anymore. Therefore we can
> return to the original semantic as long as the memcg oom killer is not
> handed over to the users space.
> 
> There is still one thing to be careful about here though. If the oom
> killer is not able to make any forward progress - e.g. because there is
> no eligible task to kill - then we have to bail out of the charge path
> to prevent from same class of deadlocks. We have basically two options
> here. Either we fail the charge with ENOMEM or force the charge and
> allow overcharge. The first option has been considered more harmful than
> useful because rare inconsistencies in the ENOMEM behavior is hard to
> test for and error prone. Basically the same reason why the page
> allocator doesn't fail allocations under such conditions. The later
> might allow runaways but those should be really unlikely unless somebody
> misconfigures the system. E.g. allowing to migrate tasks away from the
> memcg to a different unlimited memcg with move_charge_at_immigrate
> disabled.

This is more straight-forward than I thought it would be. I have no
objections to this going forward, just a couple of minor notes.

> @@ -1483,28 +1483,54 @@ static void memcg_oom_recover(struct mem_cgroup *memcg)
>  		__wake_up(&memcg_oom_waitq, TASK_NORMAL, 0, memcg);
>  }
>  
> -static void mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int order)
> +enum oom_status {
> +	OOM_SUCCESS,
> +	OOM_FAILED,
> +	OOM_ASYNC,
> +	OOM_SKIPPED

Either SUCCESS & FAILURE, or SUCCEEDED & FAILED ;)

We're not distinguishing ASYNC and SKIPPED anywhere below, but I
cannot think of a good name to communicate them both without this
function making assumptions about the charge function's behavior.
So it's a bit weird, but probably the best way to go.

> +static enum oom_status mem_cgroup_oom(struct mem_cgroup *memcg, gfp_t mask, int order)
>  {
> -	if (!current->memcg_may_oom || order > PAGE_ALLOC_COSTLY_ORDER)
> -		return;
> +	if (order > PAGE_ALLOC_COSTLY_ORDER)
> +		return OOM_SKIPPED;
>  	/*
>  	 * We are in the middle of the charge context here, so we
>  	 * don't want to block when potentially sitting on a callstack
>  	 * that holds all kinds of filesystem and mm locks.
>  	 *
> -	 * Also, the caller may handle a failed allocation gracefully
> -	 * (like optional page cache readahead) and so an OOM killer
> -	 * invocation might not even be necessary.
> +	 * cgroup1 allows disabling the OOM killer and waiting for outside
> +	 * handling until the charge can succeed; remember the context and put
> +	 * the task to sleep at the end of the page fault when all locks are
> +	 * released.
> +	 *
> +	 * On the other hand, in-kernel OOM killer allows for an async victim
> +	 * memory reclaim (oom_reaper) and that means that we are not solely
> +	 * relying on the oom victim to make a forward progress and we can
> +	 * invoke the oom killer here.
>  	 *
> -	 * That's why we don't do anything here except remember the
> -	 * OOM context and then deal with it at the end of the page
> -	 * fault when the stack is unwound, the locks are released,
> -	 * and when we know whether the fault was overall successful.
> +	 * Please note that mem_cgroup_oom_synchronize might fail to find a
> +	 * victim and then we have rely on mem_cgroup_oom_synchronize otherwise
> +	 * we would fall back to the global oom killer in pagefault_out_of_memory
>  	 */
> +	if (!memcg->oom_kill_disable) {
> +		if (mem_cgroup_out_of_memory(memcg, mask, order))
> +			return OOM_SUCCESS;
> +
> +		WARN(!current->memcg_may_oom,
> +				"Memory cgroup charge failed because of no reclaimable memory! "
> +				"This looks like a misconfiguration or a kernel bug.");
> +		return OOM_FAILED;
> +	}
> +
> +	if (!current->memcg_may_oom)
> +		return OOM_SKIPPED;

memcg_may_oom was introduced to distinguish between userspace faults
that can OOM and contexts that return -ENOMEM. Now we're using it
slightly differently and it's confusing.

1) Why warn for kernel allocations, but not userspace ones? This
should have a comment at least.

2) We invoke the OOM killer when !memcg_may_oom. We want to OOM kill
in either case, but only set up the mem_cgroup_oom_synchronize() for
userspace faults. So the code makes sense, but a better name would be
in order -- current->in_user_fault?

>  	css_get(&memcg->css);
>  	current->memcg_in_oom = memcg;
>  	current->memcg_oom_gfp_mask = mask;
>  	current->memcg_oom_order = order;
> +
> +	return OOM_ASYNC;

In terms of code flow, it would be much clearer to handle the
memcg->oom_kill_disable case first, as a special case with early
return, and make the OOM invocation the main code of this function,
given its name.

> @@ -1994,8 +2024,23 @@ static int try_charge(struct mem_cgroup *memcg, gfp_t gfp_mask,
>  
>  	memcg_memory_event(mem_over_limit, MEMCG_OOM);
>  
> -	mem_cgroup_oom(mem_over_limit, gfp_mask,
> +	/*
> +	 * keep retrying as long as the memcg oom killer is able to make
> +	 * a forward progress or bypass the charge if the oom killer
> +	 * couldn't make any progress.
> +	 */
> +	oom_status = mem_cgroup_oom(mem_over_limit, gfp_mask,
>  		       get_order(nr_pages * PAGE_SIZE));
> +	switch (oom_status) {
> +	case OOM_SUCCESS:
> +		nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
> +		oomed = true;
> +		goto retry;
> +	case OOM_FAILED:
> +		goto force;
> +	default:
> +		goto nomem;
> +	}
>  nomem:
>  	if (!(gfp_mask & __GFP_NOFAIL))
>  		return -ENOMEM;
> -- 
> 2.17.1
> 

  reply	other threads:[~2018-06-20 15:15 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-20 10:37 [RFC PATCH] memcg, oom: move out_of_memory back to the charge path Michal Hocko
2018-06-20 10:37 ` Michal Hocko
2018-06-20 15:18 ` Johannes Weiner [this message]
2018-06-20 15:31   ` Michal Hocko
2018-06-20 15:34     ` Michal Hocko
2018-06-20 19:35     ` Johannes Weiner
2018-06-20 19:38     ` Johannes Weiner
2018-06-21  7:36       ` Michal Hocko
2018-06-21  8:09 ` Michal Hocko
2018-06-21  8:09   ` Michal Hocko
2018-06-21 14:37   ` Johannes Weiner
2018-06-21 15:05     ` Michal Hocko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180620151812.GA2441@cmpxchg.org \
    --to=hannes@cmpxchg.org \
    --cc=akpm@linux-foundation.org \
    --cc=gthelen@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@kernel.org \
    --cc=mhocko@suse.com \
    --cc=shakeelb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.