From: Keith Busch <keith.busch@intel.com>
To: Linux PCI <linux-pci@vger.kernel.org>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: Sinan Kaya <okaya@codeaurora.org>,
Oza Pawandeep <poza@codeaurora.org>,
Keith Busch <keith.busch@intel.com>
Subject: [PATCH 2/7] PCI/DPC: Defer event handling to work queue
Date: Wed, 20 Jun 2018 15:38:28 -0600 [thread overview]
Message-ID: <20180620213833.25072-2-keith.busch@intel.com> (raw)
In-Reply-To: <20180620213833.25072-1-keith.busch@intel.com>
This moves all event handling to the existing work queue, which will
make passing event information simpler to the handler.
Signed-off-by: Keith Busch <keith.busch@intel.com>
---
drivers/pci/pcie/dpc.c | 44 ++++++++++++++++++++------------------------
1 file changed, 20 insertions(+), 24 deletions(-)
diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index 972aac892846..5f5fac279c75 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -108,14 +108,6 @@ static pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
return PCI_ERS_RESULT_RECOVERED;
}
-static void dpc_work(struct work_struct *work)
-{
- struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
- struct pci_dev *pdev = dpc->dev->port;
-
- /* We configure DPC so it only triggers on ERR_FATAL */
- pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
-}
static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
{
@@ -174,33 +166,21 @@ static void dpc_process_rp_pio_error(struct dpc_dev *dpc)
}
}
-static irqreturn_t dpc_irq(int irq, void *context)
+static void dpc_work(struct work_struct *work)
{
- struct dpc_dev *dpc = (struct dpc_dev *)context;
+ struct dpc_dev *dpc = container_of(work, struct dpc_dev, work);
struct pci_dev *pdev = dpc->dev->port;
struct device *dev = &dpc->dev->device;
u16 cap = dpc->cap_pos, status, source, reason, ext_reason;
pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
-
- if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
- return IRQ_NONE;
-
- if (!(status & PCI_EXP_DPC_STATUS_TRIGGER)) {
- pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
- PCI_EXP_DPC_STATUS_INTERRUPT);
- return IRQ_HANDLED;
- }
-
- pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID,
- &source);
+ pci_read_config_word(pdev, cap + PCI_EXP_DPC_SOURCE_ID, &source);
dev_info(dev, "DPC containment event, status:%#06x source:%#06x\n",
- status, source);
+ status, source);
reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN) >> 1;
ext_reason = (status & PCI_EXP_DPC_STATUS_TRIGGER_RSN_EXT) >> 5;
-
dev_warn(dev, "DPC %s detected, remove downstream devices\n",
(reason == 0) ? "unmasked uncorrectable error" :
(reason == 1) ? "ERR_NONFATAL" :
@@ -208,10 +188,26 @@ static irqreturn_t dpc_irq(int irq, void *context)
(ext_reason == 0) ? "RP PIO error" :
(ext_reason == 1) ? "software trigger" :
"reserved error");
+
/* show RP PIO error detail information */
if (dpc->rp_extensions && reason == 3 && ext_reason == 0)
dpc_process_rp_pio_error(dpc);
+ /* We configure DPC so it only triggers on ERR_FATAL */
+ pcie_do_fatal_recovery(pdev, PCIE_PORT_SERVICE_DPC);
+}
+
+static irqreturn_t dpc_irq(int irq, void *context)
+{
+ struct dpc_dev *dpc = (struct dpc_dev *)context;
+ struct pci_dev *pdev = dpc->dev->port;
+ u16 cap = dpc->cap_pos, status;
+
+ pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
+
+ if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
+ return IRQ_NONE;
+
pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
PCI_EXP_DPC_STATUS_INTERRUPT);
if (status & PCI_EXP_DPC_STATUS_TRIGGER)
--
2.14.3
next prev parent reply other threads:[~2018-06-20 21:35 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 21:38 [PATCH 1/7] PCI/DPC: Leave interrupts enabled while handling event Keith Busch
2018-06-20 21:38 ` Keith Busch [this message]
2018-06-21 7:27 ` [PATCH 2/7] PCI/DPC: Defer event handling to work queue Christoph Hellwig
2018-06-21 7:28 ` Christoph Hellwig
2018-06-21 13:58 ` Keith Busch
2018-06-20 21:38 ` [PATCH 3/7] PCI/DPC: Remove rp_pio_status from dpc struct Keith Busch
2018-06-20 21:38 ` [PATCH 4/7] PCI/AER: API for obtaining AER information Keith Busch
2018-06-20 21:38 ` [PATCH 5/7] PCI/DPC: Print AER status in DPC event handling Keith Busch
2018-06-21 9:16 ` poza
2018-06-21 14:05 ` Keith Busch
2018-06-22 5:25 ` poza
2018-06-22 10:11 ` poza
2018-06-22 14:10 ` Keith Busch
2018-06-20 21:38 ` [PATCH 6/7] PCI/DPC: Use threaded IRQ for bottom half handling Keith Busch
2018-06-21 7:29 ` Christoph Hellwig
2018-06-20 21:38 ` [PATCH 7/7] PCI/DPC: Remove indirection waiting for inactive link Keith Busch
2018-06-20 21:42 ` [PATCH 1/7] PCI/DPC: Leave interrupts enabled while handling event Sinan Kaya
2018-06-20 21:54 ` Keith Busch
2018-06-20 21:59 ` Sinan Kaya
2018-06-22 5:26 ` poza
2018-07-16 22:07 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180620213833.25072-2-keith.busch@intel.com \
--to=keith.busch@intel.com \
--cc=bhelgaas@google.com \
--cc=linux-pci@vger.kernel.org \
--cc=okaya@codeaurora.org \
--cc=poza@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.