From: Borislav Petkov <bp@alien8.de>
To: X86 ML <x86@kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 5/7] x86/mce: Carve out bank scanning code
Date: Fri, 22 Jun 2018 11:54:26 +0200 [thread overview]
Message-ID: <20180622095428.626-6-bp@alien8.de> (raw)
In-Reply-To: <20180622095428.626-1-bp@alien8.de>
From: Borislav Petkov <bp@suse.de>
Carve out the scan loop into a separate function.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
---
arch/x86/kernel/cpu/mcheck/mce.c | 134 ++++++++++++++++---------------
1 file changed, 71 insertions(+), 63 deletions(-)
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 05d2d15a95bd..5e834bad4eaf 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1130,6 +1130,76 @@ static bool __mc_check_crashing_cpu(int cpu)
return false;
}
+static void __mc_scan_banks(struct mce *m, struct mce *final,
+ unsigned long *toclear, unsigned long *valid_banks,
+ int no_way_out, int *worst)
+{
+ struct mca_config *cfg = &mca_cfg;
+ int severity, i;
+
+ for (i = 0; i < cfg->banks; i++) {
+ __clear_bit(i, toclear);
+ if (!test_bit(i, valid_banks))
+ continue;
+ if (!mce_banks[i].ctl)
+ continue;
+
+ m->misc = 0;
+ m->addr = 0;
+ m->bank = i;
+
+ m->status = mce_rdmsrl(msr_ops.status(i));
+ if ((m->status & MCI_STATUS_VAL) == 0)
+ continue;
+
+ /*
+ * Non uncorrected or non signaled errors are handled by
+ * machine_check_poll. Leave them alone, unless this panics.
+ */
+ if (!(m->status & (cfg->ser ? MCI_STATUS_S : MCI_STATUS_UC)) &&
+ !no_way_out)
+ continue;
+
+ /*
+ * Set taint even when machine check was not enabled.
+ */
+ add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
+
+ severity = mce_severity(m, cfg->tolerant, NULL, true);
+
+ /*
+ * When machine check was for corrected/deferred handler don't
+ * touch, unless we're panicing.
+ */
+ if ((severity == MCE_KEEP_SEVERITY ||
+ severity == MCE_UCNA_SEVERITY) && !no_way_out)
+ continue;
+ __set_bit(i, toclear);
+ if (severity == MCE_NO_SEVERITY) {
+ /*
+ * Machine check event was not enabled. Clear, but
+ * ignore.
+ */
+ continue;
+ }
+
+ mce_read_aux(m, i);
+
+ /* assuming valid severity level != 0 */
+ m->severity = severity;
+
+ mce_log(m);
+
+ if (severity > *worst) {
+ *final = *m;
+ *worst = severity;
+ }
+ }
+
+ /* mce_clear_state will clear *final, save locally for use later */
+ *m = *final;
+}
+
/*
* The actual machine check handler. This only handles real
* exceptions when something got corrupted coming in through int 18.
@@ -1151,8 +1221,6 @@ void do_machine_check(struct pt_regs *regs, long error_code)
char *msg = "Unknown";
struct mce m, *final;
int worst = 0;
- int severity;
- int i;
/*
* Establish sequential order between the CPUs entering the machine
@@ -1225,67 +1293,7 @@ void do_machine_check(struct pt_regs *regs, long error_code)
order = mce_start(&no_way_out);
}
- for (i = 0; i < cfg->banks; i++) {
- __clear_bit(i, toclear);
- if (!test_bit(i, valid_banks))
- continue;
- if (!mce_banks[i].ctl)
- continue;
-
- m.misc = 0;
- m.addr = 0;
- m.bank = i;
-
- m.status = mce_rdmsrl(msr_ops.status(i));
- if ((m.status & MCI_STATUS_VAL) == 0)
- continue;
-
- /*
- * Non uncorrected or non signaled errors are handled by
- * machine_check_poll. Leave them alone, unless this panics.
- */
- if (!(m.status & (cfg->ser ? MCI_STATUS_S : MCI_STATUS_UC)) &&
- !no_way_out)
- continue;
-
- /*
- * Set taint even when machine check was not enabled.
- */
- add_taint(TAINT_MACHINE_CHECK, LOCKDEP_NOW_UNRELIABLE);
-
- severity = mce_severity(&m, cfg->tolerant, NULL, true);
-
- /*
- * When machine check was for corrected/deferred handler don't
- * touch, unless we're panicing.
- */
- if ((severity == MCE_KEEP_SEVERITY ||
- severity == MCE_UCNA_SEVERITY) && !no_way_out)
- continue;
- __set_bit(i, toclear);
- if (severity == MCE_NO_SEVERITY) {
- /*
- * Machine check event was not enabled. Clear, but
- * ignore.
- */
- continue;
- }
-
- mce_read_aux(&m, i);
-
- /* assuming valid severity level != 0 */
- m.severity = severity;
-
- mce_log(&m);
-
- if (severity > worst) {
- *final = m;
- worst = severity;
- }
- }
-
- /* mce_clear_state will clear *final, save locally for use later */
- m = *final;
+ __mc_scan_banks(&m, final, toclear, valid_banks, no_way_out, &worst);
if (!no_way_out)
mce_clear_state(toclear);
--
2.17.0.582.gccdcbd54c
next prev parent reply other threads:[~2018-06-22 9:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-22 9:54 [PATCH 0/7] RAS queue Borislav Petkov
2018-06-22 9:54 ` [PATCH 1/7] x86/mce: Always use 64-bit timestamps Borislav Petkov
2018-06-22 9:54 ` [PATCH 2/7] x86/mce: Fix incorrect "Machine check from unknown source" message Borislav Petkov
2018-06-22 9:54 ` [PATCH 3/7] x86/mce: Carve out the crashing_cpu check Borislav Petkov
2018-06-22 12:41 ` [tip:ras/core] " tip-bot for Borislav Petkov
2018-06-22 9:54 ` [PATCH 4/7] x86/mce: Remove !banks check Borislav Petkov
2018-06-22 12:41 ` [tip:ras/core] " tip-bot for Borislav Petkov
2018-06-22 9:54 ` Borislav Petkov [this message]
2018-06-22 12:42 ` [tip:ras/core] x86/mce: Carve out bank scanning code tip-bot for Borislav Petkov
2018-06-22 9:54 ` [PATCH 6/7] x86/mce: Cleanup __mc_scan_banks() Borislav Petkov
2018-06-22 12:42 ` [tip:ras/core] " tip-bot for Borislav Petkov
2018-06-22 9:54 ` [PATCH 7/7] x86/mce: Do not overwrite MCi_STATUS in mce_no_way_out() Borislav Petkov
2018-06-22 12:39 ` [tip:ras/core] " tip-bot for Borislav Petkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180622095428.626-6-bp@alien8.de \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.