From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
To: Ariel Elior <ariel.elior@cavium.com>,
everest-linux-l2@cavium.com,
"David S. Miller" <davem@davemloft.net>,
Michael Chan <michael.chan@broadcom.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
"Gustavo A. R. Silva" <gustavo@embeddedor.com>
Subject: [PATCH] bnx2x: Mark expected switch fall-throughs
Date: Wed, 27 Jun 2018 20:32:23 -0500 [thread overview]
Message-ID: <20180628013223.GA22163@embeddedor.com> (raw)
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 3 +++
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 4 ++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c | 4 ++--
drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 1 +
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 +-
5 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 22243c4..98d4c5a 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -6339,6 +6339,7 @@ int bnx2x_set_led(struct link_params *params,
*/
if (!vars->link_up)
break;
+ /* else: fall through */
case LED_MODE_ON:
if (((params->phy[EXT_PHY1].type ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727) ||
@@ -12521,11 +12522,13 @@ static void bnx2x_phy_def_cfg(struct link_params *params,
switch (link_config & PORT_FEATURE_LINK_SPEED_MASK) {
case PORT_FEATURE_LINK_SPEED_10M_HALF:
phy->req_duplex = DUPLEX_HALF;
+ /* fall through */
case PORT_FEATURE_LINK_SPEED_10M_FULL:
phy->req_line_speed = SPEED_10;
break;
case PORT_FEATURE_LINK_SPEED_100M_HALF:
phy->req_duplex = DUPLEX_HALF;
+ /* fall through */
case PORT_FEATURE_LINK_SPEED_100M_FULL:
phy->req_line_speed = SPEED_100;
break;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 5b1ed24..44a6f28 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -8561,11 +8561,11 @@ int bnx2x_set_int_mode(struct bnx2x *bp)
bp->num_queues,
1 + bp->num_cnic_queues);
- /* falling through... */
+ /* fall through */
case BNX2X_INT_MODE_MSI:
bnx2x_enable_msi(bp);
- /* falling through... */
+ /* fall through */
case BNX2X_INT_MODE_INTX:
bp->num_ethernet_queues = 1;
bp->num_queues = bp->num_ethernet_queues + bp->num_cnic_queues;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
index 8baf9d3..3f4d2c8 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c
@@ -3258,7 +3258,7 @@ static int bnx2x_mcast_validate_e2(struct bnx2x *bp,
/* DEL command deletes all currently configured MACs */
case BNX2X_MCAST_CMD_DEL:
o->set_registry_size(o, 0);
- /* Don't break */
+ /* fall through */
/* RESTORE command will restore the entire multicast configuration */
case BNX2X_MCAST_CMD_RESTORE:
@@ -3592,7 +3592,7 @@ static int bnx2x_mcast_validate_e1(struct bnx2x *bp,
/* DEL command deletes all currently configured MACs */
case BNX2X_MCAST_CMD_DEL:
o->set_registry_size(o, 0);
- /* Don't break */
+ /* fall through */
/* RESTORE command will restore the entire multicast configuration */
case BNX2X_MCAST_CMD_RESTORE:
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
index dc77bfd..62da465 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c
@@ -1827,6 +1827,7 @@ int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem)
DP(BNX2X_MSG_IOV, "got VF [%d:%d] RSS update ramrod\n",
vf->abs_vfid, qidx);
bnx2x_vf_handle_rss_update_eqe(bp, vf);
+ /* fall through */
case EVENT_RING_OPCODE_VF_FLR:
/* Do nothing for now */
return 0;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index b5fc641..d2dadad 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -1727,7 +1727,7 @@ static int bnxt_async_event_process(struct bnxt *bp,
speed);
}
set_bit(BNXT_LINK_SPEED_CHNG_SP_EVENT, &bp->sp_event);
- /* fall thru */
+ /* fall through */
}
case ASYNC_EVENT_CMPL_EVENT_ID_LINK_STATUS_CHANGE:
set_bit(BNXT_LINK_CHNG_SP_EVENT, &bp->sp_event);
--
2.7.4
next reply other threads:[~2018-06-28 1:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-28 1:32 Gustavo A. R. Silva [this message]
2018-06-30 9:43 ` [PATCH] bnx2x: Mark expected switch fall-throughs David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180628013223.GA22163@embeddedor.com \
--to=gustavo@embeddedor.com \
--cc=ariel.elior@cavium.com \
--cc=davem@davemloft.net \
--cc=everest-linux-l2@cavium.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.chan@broadcom.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.