From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 23/29] qcow: Switch get_cluster_offset to be byte-based
Date: Fri, 29 Jun 2018 16:09:53 +0200 [thread overview]
Message-ID: <20180629140959.6690-24-kwolf@redhat.com> (raw)
In-Reply-To: <20180629140959.6690-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internal helper function
get_cluster_offset(), by changing n_start and n_end to be byte
offsets rather than sector indices within the cluster being
allocated. However, assert that these values are still
sector-aligned (at least qcrypto_block_encrypt() still wants that).
For now we get that alignment for free because we still use
sector-based driver callbacks.
A later patch will then switch the qcow driver as a whole over
to byte-based operation; but will still leave things at sector
alignments as it is not worth auditing the qcow image format
to worry about sub-sector requests.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/qcow.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/block/qcow.c b/block/qcow.c
index 8546fe5bb7..d7c385a91d 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -345,8 +345,8 @@ static int qcow_reopen_prepare(BDRVReopenState *state,
*
* 0 to not allocate.
*
- * 1 to allocate a normal cluster (for sector indexes 'n_start' to
- * 'n_end')
+ * 1 to allocate a normal cluster (for sector-aligned byte offsets 'n_start'
+ * to 'n_end' within the cluster)
*
* 2 to allocate a compressed cluster of size
* 'compressed_size'. 'compressed_size' must be > 0 and <
@@ -440,9 +440,10 @@ static int get_cluster_offset(BlockDriverState *bs,
if (!allocate)
return 0;
BLKDBG_EVENT(bs->file, BLKDBG_CLUSTER_ALLOC);
+ assert(QEMU_IS_ALIGNED(n_start | n_end, BDRV_SECTOR_SIZE));
/* allocate a new cluster */
if ((cluster_offset & QCOW_OFLAG_COMPRESSED) &&
- (n_end - n_start) < s->cluster_sectors) {
+ (n_end - n_start) < s->cluster_size) {
/* if the cluster is already compressed, we must
decompress it in the case it is not completely
overwritten */
@@ -480,16 +481,15 @@ static int get_cluster_offset(BlockDriverState *bs,
/* if encrypted, we must initialize the cluster
content which won't be written */
if (bs->encrypted &&
- (n_end - n_start) < s->cluster_sectors) {
- uint64_t start_sect;
+ (n_end - n_start) < s->cluster_size) {
+ uint64_t start_offset;
assert(s->crypto);
- start_sect = (offset & ~(s->cluster_size - 1)) >> 9;
- for(i = 0; i < s->cluster_sectors; i++) {
+ start_offset = offset & ~(s->cluster_size - 1);
+ for (i = 0; i < s->cluster_size; i += BDRV_SECTOR_SIZE) {
if (i < n_start || i >= n_end) {
- memset(s->cluster_data, 0x00, 512);
+ memset(s->cluster_data, 0x00, BDRV_SECTOR_SIZE);
if (qcrypto_block_encrypt(s->crypto,
- (start_sect + i) *
- BDRV_SECTOR_SIZE,
+ start_offset + i,
s->cluster_data,
BDRV_SECTOR_SIZE,
NULL) < 0) {
@@ -497,8 +497,9 @@ static int get_cluster_offset(BlockDriverState *bs,
}
BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = bdrv_pwrite(bs->file,
- cluster_offset + i * 512,
- s->cluster_data, 512);
+ cluster_offset + i,
+ s->cluster_data,
+ BDRV_SECTOR_SIZE);
if (ret < 0) {
return ret;
}
@@ -758,8 +759,8 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
n = nb_sectors;
}
ret = get_cluster_offset(bs, sector_num << 9, 1, 0,
- index_in_cluster,
- index_in_cluster + n, &cluster_offset);
+ index_in_cluster << 9,
+ (index_in_cluster + n) << 9, &cluster_offset);
if (ret < 0) {
break;
}
--
2.13.6
next prev parent reply other threads:[~2018-06-29 14:10 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-29 14:09 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 01/29] block-qdict: Pacify Coverity after commit f1b34a248e9 Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 02/29] block/crypto: Pacify Coverity after commit f853465aacb Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 03/29] qapi/job: The next release will be 3.0 Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 04/29] usb-storage: Add rerror/werror properties Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 05/29] hw/block/nvme: add optional parameter num_queues for nvme device Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 06/29] qcow2: Fix qcow2_truncate() error return value Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 07/29] block: Convert .bdrv_truncate callback to coroutine_fn Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 08/29] qcow2: Remove coroutine trampoline for preallocate_co() Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 09/29] block: Move bdrv_truncate() implementation to io.c Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 10/29] block: Use tracked request for truncate Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 11/29] file-posix: Make .bdrv_co_truncate asynchronous Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 12/29] qcow2: Remove dead check on !ret Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 13/29] block: Move request tracking to children in copy offloading Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 14/29] block/crypto: Simplify block_crypto_{open, create}_opts_init() Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 15/29] qemu-iotests: Update 026.out.nocache reference output Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 16/29] qcow2: Free allocated clusters on write error Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 17/29] qemu-iotests: Test qcow2 not leaking " Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 18/29] file-posix: Implement co versions of discard/flush Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 19/29] qcow2: Fix src_offset in copy offloading Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 20/29] iscsi: Don't blindly use designator length in response for memcpy Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 21/29] file-posix: Fix EINTR handling Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 22/29] parallels: Switch to byte-based calls Kevin Wolf
2018-06-29 14:09 ` Kevin Wolf [this message]
2018-06-29 14:09 ` [Qemu-devel] [PULL 24/29] qcow: Switch qcow_co_readv " Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 25/29] qcow: Switch qcow_co_writev " Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 26/29] qcow: Switch to a byte-based driver Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 27/29] replication: Switch to byte-based calls Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 28/29] vhdx: " Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 29/29] block: Remove unused sector-based vectored I/O Kevin Wolf
2018-06-30 10:54 ` [Qemu-devel] [PULL 00/29] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180629140959.6690-24-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.