From: Jerin Jacob <jerin.jacob@caviumnetworks.com>
To: Nikhil Rao <nikhil.rao@intel.com>
Cc: dev@dpdk.org
Subject: Re: [PATCH v4 0/5] eventdev: add interrupt driven queues to Rx adapter
Date: Mon, 2 Jul 2018 13:13:15 +0530 [thread overview]
Message-ID: <20180702074312.GA31623@jerin> (raw)
In-Reply-To: <1530496530-112764-1-git-send-email-nikhil.rao@intel.com>
-----Original Message-----
> Date: Mon, 2 Jul 2018 07:25:25 +0530
> From: Nikhil Rao <nikhil.rao@intel.com>
> To: jerin.jacob@caviumnetworks.com
> CC: nikhil.rao@intel.com, dev@dpdk.org
> Subject: [PATCH v4 0/5] eventdev: add interrupt driven queues to Rx adapter
> X-Mailer: git-send-email 1.8.3.1
>
>
> This patch series adds support for interrupt driven queues to the
> ethernet Rx adapter, the first 3 patches prepare the code to
> handle both poll and interrupt driven Rx queues, the 4th patch
> patch has code changes specific to interrupt driven queues and
> the final patch has test code.
>
> Changelog:
> v3->v4:
>
> * Fix FreeBSD build breakage.
# meson shared lib is failing with patch:
[226/1298] Compiling C object
'lib/lib@@rte_eventdev@sta/librte_eventdev_rte_event_eth_rx_adapter.c.o'.
FAILED:
lib/lib@@rte_eventdev@sta/librte_eventdev_rte_event_eth_rx_adapter.c.o
ccache gcc -Ilib/lib@@rte_eventdev@sta -Ilib -I../lib
-Ilib/librte_eventdev -I../lib/librte_eventdev -I. -I../ -Iconfig
-I../config -Ilib/librte_eal/common -I../lib/librte_eal/common
-Ilib/librte_eal/common/include -I../lib/librte_eal/common/include
-Ilib/librte_eal/common/include/arch/x86
-I../lib/librte_eal/common/include/arch/x86
-I../lib/librte_eal/linuxapp/eal/include
-Ilib/librte_eal/linuxapp/eal/../../../librte_compat
-I../lib/librte_eal/linuxapp/eal/../../../librte_compat -Ilib/librte_eal
-I../lib/librte_eal -Ilib/librte_compat -I../lib/librte_compat
-Ilib/librte_ring -I../lib/librte_ring -Ilib/librte_ethdev
-I../lib/librte_ethdev -Ilib/librte_net -I../lib/librte_net
-Ilib/librte_mbuf -I../lib/librte_mbuf -Ilib/librte_mempool
-I../lib/librte_mempool -Ilib/librte_kvargs -I../lib/librte_kvargs
-Ilib/librte_hash -I../lib/librte_hash -Ilib/librte_timer
-I../lib/librte_timer -Ilib/librte_cryptodev -I../lib/librte_cryptodev
-fdiagnostics-color=always -pipe -D_FILE_OFFSET_BITS=64 -Wall
-Winvalid-pch -Werror -O3 -include rte_config.h -Wsign-compare
-Wcast-qual -Wno-format-truncation -fPIC -march=native
-DALLOW_EXPERIMENTAL_API -MD -MQ
'lib/lib@@rte_eventdev@sta/librte_eventdev_rte_event_eth_rx_adapter.c.o'
-MF
'lib/lib@@rte_eventdev@sta/librte_eventdev_rte_event_eth_rx_adapter.c.o.d'
-o
'lib/lib@@rte_eventdev@sta/librte_eventdev_rte_event_eth_rx_adapter.c.o'
-c ../lib/librte_eventdev/rte_event_eth_rx_adapter.c
../lib/librte_eventdev/rte_event_eth_rx_adapter.c: In function
‘rxa_epoll_create1’:
../lib/librte_eventdev/rte_event_eth_rx_adapter.c:1249:1: error: no
return statement in function returning non-void [-Werror=return-type]
}
^
cc1: all warnings being treated as errors
# please rebase this and following patches to latest next-eventdev tree
http://patches.dpdk.org/patch/41795/
>
> v2->v3:
>
> * Fix shared build breakage.
>
> * Fix FreeBSD build breakage.
>
> * Reduce epoll maxevents parameter by 1, since thread wakeup
> uses pthread_cancel as opposed to an exit message through a
> file monitored by epoll_wait().
>
> * Check intr_handle before access, it is NULL when zero Rx queue
> interrupts are configured.
>
> * Remove thread_stop flag, in the event of a pthread_cancel, it is
> not possible to check this flag thread stack is unwound without
> returning to rxa_intr_thread.
>
> v1->v2:
>
> * Move rte_service_component_runstate_set such that it
> is called only when cap & RTE__EVENT_ETH_RX_ADAPTER_CAP_INTERNAL_PORT
> is false. (Jerin Jacob)
>
> * Fix meson build. (Jerin Jacob)
>
> * Replace calls to pthread_* with rte_ctrl_thread_create().
> (Jerin Jacob)
>
> * Move adapter test code to separate patch. (Jerin Jacob)
>
> Note: I haven't removed the note about devices created
> rte_event_eth_rx_adapter_create, will fix in a separate patch.
>
>
> Nikhil Rao (5):
> eventdev: standardize Rx adapter internal function names
> eventdev: improve err handling for Rx adapter queue add/del
> eventdev: move Rx adapter eth Rx to separate function
> eventdev: add interrupt driven queues to Rx adapter
> eventdev: add Rx adapter tests for interrupt driven queues
>
> config/rte_config.h | 1 +
> lib/librte_eventdev/rte_event_eth_rx_adapter.h | 5 +-
> lib/librte_eventdev/rte_event_eth_rx_adapter.c | 1526 +++++++++++++++++---
> test/test/test_event_eth_rx_adapter.c | 261 +++-
> .../prog_guide/event_ethernet_rx_adapter.rst | 24 +
> config/common_base | 1 +
> lib/librte_eventdev/Makefile | 9 +-
> 7 files changed, 1588 insertions(+), 239 deletions(-)
>
> --
> 1.8.3.1
>
prev parent reply other threads:[~2018-07-02 7:45 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-02 1:55 [PATCH v4 0/5] eventdev: add interrupt driven queues to Rx adapter Nikhil Rao
2018-07-02 1:55 ` [PATCH v4 1/5] eventdev: standardize Rx adapter internal function names Nikhil Rao
2018-07-02 1:55 ` [PATCH v4 2/5] eventdev: improve err handling for Rx adapter queue add/del Nikhil Rao
2018-07-02 1:55 ` [PATCH v4 3/5] eventdev: move Rx adapter eth Rx to separate function Nikhil Rao
2018-07-02 1:55 ` [PATCH v4 4/5] eventdev: add interrupt driven queues to Rx adapter Nikhil Rao
2018-07-02 1:55 ` [PATCH v4 5/5] eventdev: add Rx adapter tests for interrupt driven queues Nikhil Rao
2018-07-02 7:43 ` Jerin Jacob [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180702074312.GA31623@jerin \
--to=jerin.jacob@caviumnetworks.com \
--cc=dev@dpdk.org \
--cc=nikhil.rao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.