All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
To: Johannes Berg <johannes@sipsolutions.net>,
	"David S. Miller" <davem@davemloft.net>
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Gustavo A. R. Silva" <gustavo@embeddedor.com>
Subject: [PATCH] wireless: mark expected switch fall-throughs
Date: Wed, 4 Jul 2018 16:05:53 -0500	[thread overview]
Message-ID: <20180704210553.GA7869@embeddedor.com> (raw)

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Warning level 2 was used: -Wimplicit-fallthrough=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
---
 net/wireless/chan.c        | 2 ++
 net/wireless/nl80211.c     | 9 +++++++++
 net/wireless/wext-compat.c | 2 ++
 3 files changed, 13 insertions(+)

diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 2db713d..145cb51 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -747,6 +747,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
 	case NL80211_CHAN_WIDTH_20:
 		if (!ht_cap->ht_supported)
 			return false;
+		/* else: fall through */
 	case NL80211_CHAN_WIDTH_20_NOHT:
 		prohibited_flags |= IEEE80211_CHAN_NO_20MHZ;
 		width = 20;
@@ -769,6 +770,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
 		cap = vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
 		if (cap != IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
 			return false;
+		/* else: fall through */
 	case NL80211_CHAN_WIDTH_80:
 		if (!vht_cap->vht_supported)
 			return false;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e4e5f02..59b0ac5 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1676,6 +1676,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 1:
 		if (nla_put(msg, NL80211_ATTR_CIPHER_SUITES,
 			    sizeof(u32) * rdev->wiphy.n_cipher_suites,
@@ -1722,6 +1723,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 2:
 		if (nl80211_put_iftypes(msg, NL80211_ATTR_SUPPORTED_IFTYPES,
 					rdev->wiphy.interface_modes))
@@ -1729,6 +1731,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 3:
 		nl_bands = nla_nest_start(msg, NL80211_ATTR_WIPHY_BANDS);
 		if (!nl_bands)
@@ -1754,6 +1757,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 				state->chan_start++;
 				if (state->split)
 					break;
+				/* else: fall through */
 			default:
 				/* add frequencies */
 				nl_freqs = nla_nest_start(
@@ -1807,6 +1811,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 			state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 4:
 		nl_cmds = nla_nest_start(msg, NL80211_ATTR_SUPPORTED_COMMANDS);
 		if (!nl_cmds)
@@ -1833,6 +1838,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 5:
 		if (rdev->ops->remain_on_channel &&
 		    (rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL) &&
@@ -1850,6 +1856,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 6:
 #ifdef CONFIG_PM
 		if (nl80211_send_wowlan(msg, rdev, state->split))
@@ -1872,6 +1879,7 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev,
 		state->split_start++;
 		if (state->split)
 			break;
+		/* else: fall through */
 	case 8:
 		if ((rdev->wiphy.flags & WIPHY_FLAG_HAVE_AP_SME) &&
 		    nla_put_u32(msg, NL80211_ATTR_DEVICE_AP_SME,
@@ -4466,6 +4474,7 @@ static int parse_station_flags(struct genl_info *info,
 		params->sta_flags_mask = BIT(NL80211_STA_FLAG_AUTHENTICATED) |
 					 BIT(NL80211_STA_FLAG_MFP) |
 					 BIT(NL80211_STA_FLAG_AUTHORIZED);
+		/* fall through */
 	default:
 		return -EINVAL;
 	}
diff --git a/net/wireless/wext-compat.c b/net/wireless/wext-compat.c
index 167f702..9db3920 100644
--- a/net/wireless/wext-compat.c
+++ b/net/wireless/wext-compat.c
@@ -1333,6 +1333,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
 			wstats.qual.qual = sig + 110;
 			break;
 		}
+		/* else: fall through */
 	case CFG80211_SIGNAL_TYPE_UNSPEC:
 		if (sinfo.filled & BIT_ULL(NL80211_STA_INFO_SIGNAL)) {
 			wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
@@ -1341,6 +1342,7 @@ static struct iw_statistics *cfg80211_wireless_stats(struct net_device *dev)
 			wstats.qual.qual = sinfo.signal;
 			break;
 		}
+		/* else: fall through */
 	default:
 		wstats.qual.updated |= IW_QUAL_LEVEL_INVALID;
 		wstats.qual.updated |= IW_QUAL_QUAL_INVALID;
-- 
2.7.4

             reply	other threads:[~2018-07-04 21:05 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-04 21:05 Gustavo A. R. Silva [this message]
2018-07-06 12:29 ` [PATCH] wireless: mark expected switch fall-throughs Johannes Berg
2018-10-23  0:07   ` Gustavo A. R. Silva
2018-10-23  0:07     ` Gustavo A. R. Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180704210553.GA7869@embeddedor.com \
    --to=gustavo@embeddedor.com \
    --cc=davem@davemloft.net \
    --cc=johannes@sipsolutions.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.