All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Mack <daniel@zonque.org>
To: zbr@ioremap.net, robh+dt@kernel.org, mark.rutland@arm.com,
	szabolcs.gyurko@tlt.hu
Cc: sre@kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-pm@vger.kernel.org,
	robert.jarzmik@free.fr, Daniel Mack <daniel@zonque.org>
Subject: [PATCH v4 4/5] power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
Date: Fri,  6 Jul 2018 07:35:51 +0200	[thread overview]
Message-ID: <20180706053552.11438-5-daniel@zonque.org> (raw)
In-Reply-To: <20180706053552.11438-1-daniel@zonque.org>

This patch removes the w1 slave driver that used to register the w1 family
and instanciate a platform device at runtime. The code now lives in the
supply driver instead to avoid that level of indirection.

The old device name "ds2760-battery.0" is preserved, so userspace
applications can access the same virtual device nodes as before.

Note that because the w1 core does not currently have a framework for
suspend/resume, the driver now registers a PM notifier callback.

Signed-off-by: Daniel Mack <daniel@zonque.org>
---
 drivers/power/supply/Kconfig          |   2 +-
 drivers/power/supply/ds2760_battery.c | 321 ++++++++++++++++++--------
 drivers/w1/slaves/Kconfig             |  12 -
 drivers/w1/slaves/Makefile            |   1 -
 drivers/w1/slaves/w1_ds2760.c         | 175 --------------
 drivers/w1/slaves/w1_ds2760.h         |  59 -----
 6 files changed, 232 insertions(+), 338 deletions(-)
 delete mode 100644 drivers/w1/slaves/w1_ds2760.c
 delete mode 100644 drivers/w1/slaves/w1_ds2760.h

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 428b426842f4..518a88c4adfa 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -92,7 +92,7 @@ config BATTERY_CPCAP
 
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
-	depends on W1 && W1_SLAVE_DS2760
+	depends on W1
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
diff --git a/drivers/power/supply/ds2760_battery.c b/drivers/power/supply/ds2760_battery.c
index ae180dc929c9..aa406a7c65a1 100644
--- a/drivers/power/supply/ds2760_battery.c
+++ b/drivers/power/supply/ds2760_battery.c
@@ -27,9 +27,63 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
-
+#include <linux/suspend.h>
 #include <linux/w1.h>
-#include "../../w1/slaves/w1_ds2760.h"
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+static bool pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
+static unsigned int rated_capacity;
+module_param(rated_capacity, uint, 0644);
+MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
+#define W1_FAMILY_DS2760		0x30
+
+/* Known commands to the DS2760 chip */
+#define W1_DS2760_SWAP			0xAA
+#define W1_DS2760_READ_DATA		0x69
+#define W1_DS2760_WRITE_DATA		0x6C
+#define W1_DS2760_COPY_DATA		0x48
+#define W1_DS2760_RECALL_DATA		0xB8
+#define W1_DS2760_LOCK			0x6A
+
+/* Number of valid register addresses */
+#define DS2760_DATA_SIZE		0x40
+
+#define DS2760_PROTECTION_REG		0x00
+
+#define DS2760_STATUS_REG		0x01
+#define DS2760_STATUS_IE		(1 << 2)
+#define DS2760_STATUS_SWEN		(1 << 3)
+#define DS2760_STATUS_RNAOP		(1 << 4)
+#define DS2760_STATUS_PMOD		(1 << 5)
+
+#define DS2760_EEPROM_REG		0x07
+#define DS2760_SPECIAL_FEATURE_REG	0x08
+#define DS2760_VOLTAGE_MSB		0x0c
+#define DS2760_VOLTAGE_LSB		0x0d
+#define DS2760_CURRENT_MSB		0x0e
+#define DS2760_CURRENT_LSB		0x0f
+#define DS2760_CURRENT_ACCUM_MSB	0x10
+#define DS2760_CURRENT_ACCUM_LSB	0x11
+#define DS2760_TEMP_MSB			0x18
+#define DS2760_TEMP_LSB			0x19
+#define DS2760_EEPROM_BLOCK0		0x20
+#define DS2760_ACTIVE_FULL		0x20
+#define DS2760_EEPROM_BLOCK1		0x30
+#define DS2760_STATUS_WRITE_REG		0x31
+#define DS2760_RATED_CAPACITY		0x32
+#define DS2760_CURRENT_OFFSET_BIAS	0x33
+#define DS2760_ACTIVE_EMPTY		0x3b
 
 struct ds2760_device_info {
 	struct device *dev;
@@ -55,28 +109,113 @@ struct ds2760_device_info {
 	int full_counter;
 	struct power_supply *bat;
 	struct power_supply_desc bat_desc;
-	struct device *w1_dev;
 	struct workqueue_struct *monitor_wqueue;
 	struct delayed_work monitor_work;
 	struct delayed_work set_charged_work;
+	struct notifier_block pm_notifier;
 };
 
-static unsigned int cache_time = 1000;
-module_param(cache_time, uint, 0644);
-MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
+			int io)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
 
-static bool pmod_enabled;
-module_param(pmod_enabled, bool, 0644);
-MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+	if (!dev)
+		return 0;
 
-static unsigned int rated_capacity;
-module_param(rated_capacity, uint, 0644);
-MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+	mutex_lock(&sl->master->bus_mutex);
 
-static unsigned int current_accum;
-module_param(current_accum, uint, 0644);
-MODULE_PARM_DESC(current_accum, "current accumulator value");
+	if (addr > DS2760_DATA_SIZE || addr < 0) {
+		count = 0;
+		goto out;
+	}
+	if (addr + count > DS2760_DATA_SIZE)
+		count = DS2760_DATA_SIZE - addr;
+
+	if (!w1_reset_select_slave(sl)) {
+		if (!io) {
+			w1_write_8(sl->master, W1_DS2760_READ_DATA);
+			w1_write_8(sl->master, addr);
+			count = w1_read_block(sl->master, buf, count);
+		} else {
+			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
+			w1_write_8(sl->master, addr);
+			w1_write_block(sl->master, buf, count);
+			/* XXX w1_write_block returns void, not n_written */
+		}
+	}
+
+out:
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return count;
+}
+
+static int w1_ds2760_read(struct device *dev,
+			  char *buf, int addr,
+			  size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 0);
+}
+
+static int w1_ds2760_write(struct device *dev,
+			   char *buf,
+			   int addr, size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 1);
+}
 
+static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+	if (!dev)
+		return -EINVAL;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_reset_select_slave(sl) == 0) {
+		w1_write_8(sl->master, cmd);
+		w1_write_8(sl->master, addr);
+	}
+
+	mutex_unlock(&sl->master->bus_mutex);
+	return 0;
+}
+
+static int w1_ds2760_store_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
+}
+
+static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
+}
+
+static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr, char *buf,
+			     loff_t off, size_t count)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	return w1_ds2760_read(dev, buf, off, count);
+}
+
+static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
+
+static struct bin_attribute *w1_ds2760_bin_attrs[] = {
+	&bin_attr_w1_slave,
+	NULL,
+};
+
+static const struct attribute_group w1_ds2760_group = {
+	.bin_attrs = w1_ds2760_bin_attrs,
+};
+
+static const struct attribute_group *w1_ds2760_groups[] = {
+	&w1_ds2760_group,
+	NULL,
+};
 /* Some batteries have their rated capacity stored a N * 10 mAh, while
  * others use an index into this table. */
 static int rated_capacities[] = {
@@ -138,10 +277,10 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 		count = DS2760_TEMP_LSB - start + 1;
 	}
 
-	ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
+	ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
 	if (ret != count) {
 		dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
-			 di->w1_dev);
+			 di->dev);
 		return 1;
 	}
 
@@ -242,7 +381,7 @@ static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
 	acr[0] = acr_val >> 8;
 	acr[1] = acr_val & 0xff;
 
-	if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+	if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
 		dev_warn(di->dev, "ACR write failed\n");
 }
 
@@ -297,9 +436,9 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di,
 	if (status == di->raw[DS2760_STATUS_REG])
 		return;
 
-	w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
 }
 
 static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
@@ -308,9 +447,9 @@ static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
 	if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
 		return;
 
-	w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
 }
 
 static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
@@ -325,9 +464,9 @@ static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
 	    tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
 		return;
 
-	w1_ds2760_write(di->w1_dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
+	w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
 
 	/* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
 	 * values won't be read back by ds2760_battery_read_status() */
@@ -383,9 +522,9 @@ static void ds2760_battery_set_charged_work(struct work_struct *work)
 
 	dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
 
-	w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
 
 	/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
 	 * value won't be read back by ds2760_battery_read_status() */
@@ -504,24 +643,55 @@ static enum power_supply_property ds2760_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
 };
 
-static int ds2760_battery_probe(struct platform_device *pdev)
+static int ds2760_pm_notifier(struct notifier_block *notifier,
+			      unsigned long pm_event,
+			      void *unused)
+{
+	struct ds2760_device_info *di =
+		container_of(notifier, struct ds2760_device_info, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		power_supply_changed(di->bat);
+		mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
+
+		break;
+
+	case PM_RESTORE_PREPARE:
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int w1_ds2760_add_slave(struct w1_slave *sl)
 {
 	struct power_supply_config psy_cfg = {};
-	char status;
-	int retval = 0;
 	struct ds2760_device_info *di;
+	struct device *dev = &sl->dev;
+	int retval = 0;
+	char name[32];
+	char status;
 
-	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
 	if (!di) {
 		retval = -ENOMEM;
 		goto di_alloc_failed;
 	}
 
-	platform_set_drvdata(pdev, di);
+	snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
 
-	di->dev				= &pdev->dev;
-	di->w1_dev			= pdev->dev.parent;
-	di->bat_desc.name		= dev_name(&pdev->dev);
+	di->dev				= dev;
+	di->bat_desc.name		= name;
 	di->bat_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
 	di->bat_desc.properties		= ds2760_battery_props;
 	di->bat_desc.num_properties	= ARRAY_SIZE(ds2760_battery_props);
@@ -533,10 +703,12 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	di->bat_desc.external_power_changed =
 				  ds2760_battery_external_power_changed;
 
-	psy_cfg.drv_data		= di;
+	psy_cfg.drv_data = di;
 
 	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
 
+	sl->family_data = di;
+
 	/* enable sleep mode feature */
 	ds2760_battery_read_status(di);
 	status = di->raw[DS2760_STATUS_REG];
@@ -556,7 +728,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	if (current_accum)
 		ds2760_battery_set_current_accum(di, current_accum);
 
-	di->bat = power_supply_register(&pdev->dev, &di->bat_desc, &psy_cfg);
+	di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
 	if (IS_ERR(di->bat)) {
 		dev_err(di->dev, "failed to register battery\n");
 		retval = PTR_ERR(di->bat);
@@ -566,14 +738,16 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
 	INIT_DELAYED_WORK(&di->set_charged_work,
 			  ds2760_battery_set_charged_work);
-	di->monitor_wqueue = alloc_ordered_workqueue(dev_name(&pdev->dev),
-						     WQ_MEM_RECLAIM);
+	di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
 	if (!di->monitor_wqueue) {
 		retval = -ESRCH;
 		goto workqueue_failed;
 	}
 	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
 
+	di->pm_notifier.notifier_call = ds2760_pm_notifier;
+	register_pm_notifier(&di->pm_notifier);
+
 	goto success;
 
 workqueue_failed:
@@ -584,65 +758,32 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	return retval;
 }
 
-static int ds2760_battery_remove(struct platform_device *pdev)
+static void w1_ds2760_remove_slave(struct w1_slave *sl)
 {
-	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+	struct ds2760_device_info *di = sl->family_data;
 
+	unregister_pm_notifier(&di->pm_notifier);
 	cancel_delayed_work_sync(&di->monitor_work);
 	cancel_delayed_work_sync(&di->set_charged_work);
 	destroy_workqueue(di->monitor_wqueue);
 	power_supply_unregister(di->bat);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int ds2760_battery_suspend(struct platform_device *pdev,
-				  pm_message_t state)
-{
-	struct ds2760_device_info *di = platform_get_drvdata(pdev);
-
-	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
-
-	return 0;
-}
-
-static int ds2760_battery_resume(struct platform_device *pdev)
-{
-	struct ds2760_device_info *di = platform_get_drvdata(pdev);
-
-	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
-	power_supply_changed(di->bat);
-
-	mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
-
-	return 0;
 }
 
-#else
-
-#define ds2760_battery_suspend NULL
-#define ds2760_battery_resume NULL
-
-#endif /* CONFIG_PM */
-
-MODULE_ALIAS("platform:ds2760-battery");
-
-static struct platform_driver ds2760_battery_driver = {
-	.driver = {
-		.name = "ds2760-battery",
-	},
-	.probe	  = ds2760_battery_probe,
-	.remove   = ds2760_battery_remove,
-	.suspend  = ds2760_battery_suspend,
-	.resume	  = ds2760_battery_resume,
+static struct w1_family_ops w1_ds2760_fops = {
+	.add_slave	= w1_ds2760_add_slave,
+	.remove_slave	= w1_ds2760_remove_slave,
+	.groups		= w1_ds2760_groups,
 };
 
-module_platform_driver(ds2760_battery_driver);
+static struct w1_family w1_ds2760_family = {
+	.fid		= W1_FAMILY_DS2760,
+	.fops		= &w1_ds2760_fops,
+};
+module_w1_family(w1_ds2760_family);
 
-MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
 	      "Matt Reimer <mreimer@vpop.net>, "
 	      "Anton Vorontsov <cbou@mail.ru>");
-MODULE_DESCRIPTION("ds2760 battery driver");
+MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig
index 7931231d8e80..e22fdeddada1 100644
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@@ -100,18 +100,6 @@ config W1_SLAVE_DS2438
 	  Say Y here if you want to use a 1-wire
 	  DS2438 Smart Battery Monitor device support
 
-config W1_SLAVE_DS2760
-	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
-	help
-	  If you enable this you will have the DS2760 battery monitor
-	  chip support.
-
-	  The battery monitor chip is used in many batteries/devices
-	  as the one who is responsible for charging/discharging/monitoring
-	  Li+ batteries.
-
-	  If you are unsure, say N.
-
 config W1_SLAVE_DS2780
 	tristate "Dallas 2780 battery monitor chip"
 	help
diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile
index d5f4f4d5b9e5..eab29f151413 100644
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431)	+= w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2805)	+= w1_ds2805.o
 obj-$(CONFIG_W1_SLAVE_DS2433)	+= w1_ds2433.o
 obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
-obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o
diff --git a/drivers/w1/slaves/w1_ds2760.c b/drivers/w1/slaves/w1_ds2760.c
deleted file mode 100644
index 26168abfb8b8..000000000000
--- a/drivers/w1/slaves/w1_ds2760.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- * 1-Wire implementation for the ds2760 chip
- *
- * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/idr.h>
-#include <linux/gfp.h>
-
-#include <linux/w1.h>
-
-#include "w1_ds2760.h"
-
-#define W1_FAMILY_DS2760	0x30
-
-static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
-	if (!dev)
-		return 0;
-
-	mutex_lock(&sl->master->bus_mutex);
-
-	if (addr > DS2760_DATA_SIZE || addr < 0) {
-		count = 0;
-		goto out;
-	}
-	if (addr + count > DS2760_DATA_SIZE)
-		count = DS2760_DATA_SIZE - addr;
-
-	if (!w1_reset_select_slave(sl)) {
-		if (!io) {
-			w1_write_8(sl->master, W1_DS2760_READ_DATA);
-			w1_write_8(sl->master, addr);
-			count = w1_read_block(sl->master, buf, count);
-		} else {
-			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
-			w1_write_8(sl->master, addr);
-			w1_write_block(sl->master, buf, count);
-			/* XXX w1_write_block returns void, not n_written */
-		}
-	}
-
-out:
-	mutex_unlock(&sl->master->bus_mutex);
-
-	return count;
-}
-
-int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
-{
-	return w1_ds2760_io(dev, buf, addr, count, 0);
-}
-EXPORT_SYMBOL(w1_ds2760_read);
-
-int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
-{
-	return w1_ds2760_io(dev, buf, addr, count, 1);
-}
-EXPORT_SYMBOL(w1_ds2760_write);
-
-static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
-{
-	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
-	if (!dev)
-		return -EINVAL;
-
-	mutex_lock(&sl->master->bus_mutex);
-
-	if (w1_reset_select_slave(sl) == 0) {
-		w1_write_8(sl->master, cmd);
-		w1_write_8(sl->master, addr);
-	}
-
-	mutex_unlock(&sl->master->bus_mutex);
-	return 0;
-}
-
-int w1_ds2760_store_eeprom(struct device *dev, int addr)
-{
-	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
-}
-EXPORT_SYMBOL(w1_ds2760_store_eeprom);
-
-int w1_ds2760_recall_eeprom(struct device *dev, int addr)
-{
-	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
-}
-EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
-
-static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
-			     struct bin_attribute *bin_attr, char *buf,
-			     loff_t off, size_t count)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	return w1_ds2760_read(dev, buf, off, count);
-}
-
-static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
-
-static struct bin_attribute *w1_ds2760_bin_attrs[] = {
-	&bin_attr_w1_slave,
-	NULL,
-};
-
-static const struct attribute_group w1_ds2760_group = {
-	.bin_attrs = w1_ds2760_bin_attrs,
-};
-
-static const struct attribute_group *w1_ds2760_groups[] = {
-	&w1_ds2760_group,
-	NULL,
-};
-
-static int w1_ds2760_add_slave(struct w1_slave *sl)
-{
-	int ret;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-	pdev->dev.parent = &sl->dev;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto pdev_add_failed;
-
-	dev_set_drvdata(&sl->dev, pdev);
-
-	return 0;
-
-pdev_add_failed:
-	platform_device_put(pdev);
-
-	return ret;
-}
-
-static void w1_ds2760_remove_slave(struct w1_slave *sl)
-{
-	struct platform_device *pdev = dev_get_drvdata(&sl->dev);
-
-	platform_device_unregister(pdev);
-}
-
-static struct w1_family_ops w1_ds2760_fops = {
-	.add_slave    = w1_ds2760_add_slave,
-	.remove_slave = w1_ds2760_remove_slave,
-	.groups       = w1_ds2760_groups,
-};
-
-static struct w1_family w1_ds2760_family = {
-	.fid = W1_FAMILY_DS2760,
-	.fops = &w1_ds2760_fops,
-};
-module_w1_family(w1_ds2760_family);
-
-MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
-MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
diff --git a/drivers/w1/slaves/w1_ds2760.h b/drivers/w1/slaves/w1_ds2760.h
deleted file mode 100644
index 24168c94eeae..000000000000
--- a/drivers/w1/slaves/w1_ds2760.h
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * 1-Wire implementation for the ds2760 chip
- *
- * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- */
-
-#ifndef __w1_ds2760_h__
-#define __w1_ds2760_h__
-
-/* Known commands to the DS2760 chip */
-#define W1_DS2760_SWAP			0xAA
-#define W1_DS2760_READ_DATA		0x69
-#define W1_DS2760_WRITE_DATA		0x6C
-#define W1_DS2760_COPY_DATA		0x48
-#define W1_DS2760_RECALL_DATA		0xB8
-#define W1_DS2760_LOCK			0x6A
-
-/* Number of valid register addresses */
-#define DS2760_DATA_SIZE		0x40
-
-#define DS2760_PROTECTION_REG		0x00
-
-#define DS2760_STATUS_REG		0x01
-#define DS2760_STATUS_IE		(1 << 2)
-#define DS2760_STATUS_SWEN		(1 << 3)
-#define DS2760_STATUS_RNAOP		(1 << 4)
-#define DS2760_STATUS_PMOD		(1 << 5)
-
-#define DS2760_EEPROM_REG		0x07
-#define DS2760_SPECIAL_FEATURE_REG	0x08
-#define DS2760_VOLTAGE_MSB		0x0c
-#define DS2760_VOLTAGE_LSB		0x0d
-#define DS2760_CURRENT_MSB		0x0e
-#define DS2760_CURRENT_LSB		0x0f
-#define DS2760_CURRENT_ACCUM_MSB	0x10
-#define DS2760_CURRENT_ACCUM_LSB	0x11
-#define DS2760_TEMP_MSB			0x18
-#define DS2760_TEMP_LSB			0x19
-#define DS2760_EEPROM_BLOCK0		0x20
-#define DS2760_ACTIVE_FULL		0x20
-#define DS2760_EEPROM_BLOCK1		0x30
-#define DS2760_STATUS_WRITE_REG		0x31
-#define DS2760_RATED_CAPACITY		0x32
-#define DS2760_CURRENT_OFFSET_BIAS	0x33
-#define DS2760_ACTIVE_EMPTY		0x3b
-
-extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
-			  size_t count);
-extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
-			   size_t count);
-extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
-extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
-
-#endif /* !__w1_ds2760_h__ */
-- 
2.17.1

  parent reply	other threads:[~2018-07-06  5:35 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-06  5:35 [PATCH v4 0/5] Add devicetree functionality to w1 busses and ds2760 Daniel Mack
2018-07-06  5:35 ` [PATCH v4 1/5] dt-bindings: w1: document generic onewire bindings Daniel Mack
2018-07-11 15:01   ` Rob Herring
2018-07-18 12:40     ` Daniel Mack
2018-07-20 15:10       ` Rob Herring
2018-07-22 22:01         ` Sebastian Reichel
2018-07-06  5:35 ` [PATCH v4 2/5] dt-bindings: w1: document bindings for ds2760 battery monitor Daniel Mack
2018-07-11 15:02   ` Rob Herring
2018-07-06  5:35 ` [PATCH v4 3/5] w1: core: match sub-nodes of bus masters in devicetree Daniel Mack
2018-07-06 13:52   ` Sebastian Reichel
2018-07-06 14:51     ` Greg Kroah-Hartman
2018-07-06  5:35 ` Daniel Mack [this message]
2018-07-06 13:36   ` [PATCH v4 4/5] power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion Sebastian Reichel
2018-07-06  5:35 ` [PATCH v4 5/5] power: supply: ds2760_battery: add devicetree probing Daniel Mack
2018-07-06 13:43   ` Sebastian Reichel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180706053552.11438-5-daniel@zonque.org \
    --to=daniel@zonque.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robert.jarzmik@free.fr \
    --cc=robh+dt@kernel.org \
    --cc=sre@kernel.org \
    --cc=szabolcs.gyurko@tlt.hu \
    --cc=zbr@ioremap.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.