Re: [PATCH v2 1/4] pwm: fsl-ftm: Added a dedicated IP interface clock

[Thierry Reding <thierry.reding@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 854 bytes --]

On Fri, Jun 08, 2018 at 02:22:34PM -0500, shenwei.wang@nxp.com wrote:
> The current driver assumes that the ftm_sys clock works as
> one of the clock sources for the IP block as well as the IP
> interface clock. This assumption does not apply any more on
> the latest i.MX8x SoC family. On i.MX8x SoCs, a dedicated IP
> interface clock is introduced and it must be enabled before
> accessing any FTM registers. Moreover, the clock can not be
> used as the source clock for the FTM IP block. This patch
> introduces the ipg_clk as the dedicated IP interface clock
> and by default it is the same as the ftm_sys clock if not
> specified.
> 
> Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
> ---
>  drivers/pwm/pwm-fsl-ftm.c | 22 ++++++++++++++++------
>  1 file changed, 16 insertions(+), 6 deletions(-)

Applied, thanks.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]