From: John Whitmore <johnfwhitmore@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: devel@driverdev.osuosl.org, gregkh@linuxfoundation.org,
pombredanne@nexb.com, kstewart@linuxfoundation.org,
tglx@linutronix.de, John Whitmore <johnfwhitmore@gmail.com>
Subject: [PATCH 03/13] staging:rtl8192u: Remove typdef from enumeration RF90_RADIO_PATH_E - Style
Date: Fri, 13 Jul 2018 12:23:01 +0100 [thread overview]
Message-ID: <20180713112311.544-4-johnfwhitmore@gmail.com> (raw)
In-Reply-To: <20180713112311.544-1-johnfwhitmore@gmail.com>
Checkpatch warns about the creation of new types. This patch simply removes
the typedef from the enumeration RF90_RADIO_PATH_E to clear this checkpatch
warning. There should be no impact on run time code execution, as this is a
coding style issue only.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
drivers/staging/rtl8192u/r8190_rtl8256.c | 42 ++++++++++++------------
drivers/staging/rtl8192u/r8192U_core.c | 4 +--
drivers/staging/rtl8192u/r819xU_phy.c | 31 ++++++++++-------
drivers/staging/rtl8192u/r819xU_phy.h | 15 +++++----
4 files changed, 51 insertions(+), 41 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 02bdd933f05b..9f35dcb9e13e 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -41,16 +41,16 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev, enum ht_channel_width Bandwi
|| priv->card_8192_version
== VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
0x0b, bMask12Bits, 0x100); /* phy para:1ba */
rtl8192_phy_SetRFReg(dev,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
0x0e, bMask12Bits, 0x021);
rtl8192_phy_SetRFReg(dev,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
@@ -58,15 +58,15 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev, enum ht_channel_width Bandwi
break;
case HT_CHANNEL_WIDTH_20_40:
if (priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
+ rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
+ rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
+ rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
if (priv->chan == 3 || priv->chan == 9)
/* I need to set priv->chan whenever current channel changes */
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
+ rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
else
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
+ rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
@@ -115,14 +115,14 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
/* Initialize RF */
- for (eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < priv->NumTotalRFPath; eRFPath++) {
+ for (eRFPath = (enum RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < priv->NumTotalRFPath; eRFPath++) {
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
/* Joseph test for shorten RF config
- * pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
+ * pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
* ----Store original RFENV control type
*/
switch (eRFPath) {
@@ -146,12 +146,12 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? */
- rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
+ rtl8192_phy_SetRFReg(dev, (enum RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
/* Check RF block (for FPGA platform only)----
* TODO: this function should be removed on ASIC , Emily 2007.2.2
*/
- if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath)) {
+ if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (enum RF90_RADIO_PATH_E)eRFPath)) {
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
@@ -162,32 +162,32 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
switch (eRFPath) {
case RF90_PATH_A:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (enum RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_B:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (enum RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_C:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (enum RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_D:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
- ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
- RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
+ ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (enum RF90_RADIO_PATH_E)eRFPath);
+ RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (enum RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 848239e24859..b5ce3ee89e9f 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2897,7 +2897,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
*/
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
0x4, 0xC00, 0x0);
} else if (pMgntInfo->RfOffReason > RF_CHANGE_BY_PS) {
/* H/W or S/W RF OFF before sleep. */
@@ -2923,7 +2923,7 @@ static bool rtl8192_adapter_start(struct net_device *dev)
*/
for (eRFPath = 0; eRFPath < pHalData->NumTotalRFPath; eRFPath++)
PHY_SetRFReg(Adapter,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
0x4, 0xC00, 0x0);
}
}
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 0462de662eff..3df4775e1f99 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -108,11 +108,13 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask)
return (reg & bitmask) >> bitshift;
}
-static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+static u32 phy_FwRFSerialRead(struct net_device *dev,
+ enum RF90_RADIO_PATH_E eRFPath,
u32 offset);
static void phy_FwRFSerialWrite(struct net_device *dev,
- RF90_RADIO_PATH_E eRFPath, u32 offset,
+ enum RF90_RADIO_PATH_E eRFPath,
+ u32 offset,
u32 data);
/******************************************************************************
@@ -130,7 +132,7 @@ static void phy_FwRFSerialWrite(struct net_device *dev,
* ---need more spec for this information.
******************************************************************************/
static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
- RF90_RADIO_PATH_E eRFPath, u32 offset)
+ enum RF90_RADIO_PATH_E eRFPath, u32 offset)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u32 ret = 0;
@@ -215,7 +217,8 @@ static u32 rtl8192_phy_RFSerialRead(struct net_device *dev,
* ---------------------------------------------------------------------------
*****************************************************************************/
static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
- RF90_RADIO_PATH_E eRFPath, u32 offset,
+ enum RF90_RADIO_PATH_E eRFPath,
+ u32 offset,
u32 data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -279,7 +282,8 @@ static void rtl8192_phy_RFSerialWrite(struct net_device *dev,
* return: none
* notice:
*****************************************************************************/
-void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+void rtl8192_phy_SetRFReg(struct net_device *dev,
+ enum RF90_RADIO_PATH_E eRFPath,
u32 reg_addr, u32 bitmask, u32 data)
{
struct r8192_priv *priv = ieee80211_priv(dev);
@@ -327,7 +331,8 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
* return: u32 data //the readback register value
* notice:
*****************************************************************************/
-u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
+ enum RF90_RADIO_PATH_E eRFPath,
u32 reg_addr, u32 bitmask)
{
u32 reg, bitshift;
@@ -357,7 +362,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
* return: u32
* notice:
****************************************************************************/
-static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+static u32 phy_FwRFSerialRead(struct net_device *dev,
+ enum RF90_RADIO_PATH_E eRFPath,
u32 offset)
{
u32 reg = 0;
@@ -422,7 +428,8 @@ static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
* notice:
****************************************************************************/
static void phy_FwRFSerialWrite(struct net_device *dev,
- RF90_RADIO_PATH_E eRFPath, u32 offset, u32 data)
+ enum RF90_RADIO_PATH_E eRFPath,
+ u32 offset, u32 data)
{
u8 time = 0;
u32 tmp;
@@ -696,7 +703,7 @@ static void rtl8192_InitBBRFRegDef(struct net_device *dev)
* notice: This function may be removed in the ASIC
******************************************************************************/
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, enum HW90_BLOCK_E CheckBlock,
- RF90_RADIO_PATH_E eRFPath)
+ enum RF90_RADIO_PATH_E eRFPath)
{
u8 ret = 0;
u32 i, CheckTimes = 4, reg = 0;
@@ -791,7 +798,7 @@ static void rtl8192_BB_Config_ParaFile(struct net_device *dev)
eCheckItem <= HW90_BLOCK_PHY1; eCheckItem++) {
/* don't care RF path */
status = rtl8192_phy_checkBBAndRF(dev, (enum HW90_BLOCK_E)eCheckItem,
- (RF90_RADIO_PATH_E)0);
+ (enum RF90_RADIO_PATH_E)0);
if (status != 0) {
RT_TRACE((COMP_ERR | COMP_PHY),
"PHY_RF8256_Config(): Check PHY%d Fail!!\n",
@@ -969,7 +976,7 @@ void rtl8192_phy_updateInitGain(struct net_device *dev)
* notice: Delay may be required for RF configuration
*****************************************************************************/
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
- RF90_RADIO_PATH_E eRFPath)
+ enum RF90_RADIO_PATH_E eRFPath)
{
int i;
@@ -1387,7 +1394,7 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
case CmdID_RF_WriteReg:
for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
rtl8192_phy_SetRFReg(dev,
- (RF90_RADIO_PATH_E)eRFPath,
+ (enum RF90_RADIO_PATH_E)eRFPath,
CurrentCmd->Para1,
bZebra1_ChannelNum,
CurrentCmd->Para2);
diff --git a/drivers/staging/rtl8192u/r819xU_phy.h b/drivers/staging/rtl8192u/r819xU_phy.h
index 0f680a04a468..d93da2360649 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.h
+++ b/drivers/staging/rtl8192u/r819xU_phy.h
@@ -42,13 +42,13 @@ enum HW90_BLOCK_E {
HW90_BLOCK_MAXIMUM = 4, /* Never use this */
};
-typedef enum _RF90_RADIO_PATH {
+enum RF90_RADIO_PATH_E {
RF90_PATH_A = 0, /* Radio Path A */
RF90_PATH_B = 1, /* Radio Path B */
RF90_PATH_C = 2, /* Radio Path C */
RF90_PATH_D = 3, /* Radio Path D */
RF90_PATH_MAX /* Max RF number 92 support */
-} RF90_RADIO_PATH_E, *PRF90_RADIO_PATH_E;
+};
#define bMaskByte0 0xff
#define bMaskByte1 0xff00
@@ -62,21 +62,24 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath);
void rtl8192_setBBreg(struct net_device *dev, u32 reg_addr,
u32 bitmask, u32 data);
u32 rtl8192_QueryBBReg(struct net_device *dev, u32 reg_addr, u32 bitmask);
-void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+void rtl8192_phy_SetRFReg(struct net_device *dev,
+ enum RF90_RADIO_PATH_E eRFPath,
u32 reg_addr, u32 bitmask, u32 data);
-u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath,
+u32 rtl8192_phy_QueryRFReg(struct net_device *dev,
+ enum RF90_RADIO_PATH_E eRFPath,
u32 reg_addr, u32 bitmask);
void rtl8192_phy_configmac(struct net_device *dev);
void rtl8192_phyConfigBB(struct net_device *dev, u8 ConfigType);
u8 rtl8192_phy_checkBBAndRF(struct net_device *dev,
- enum HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath);
+ enum HW90_BLOCK_E CheckBlock,
+ enum RF90_RADIO_PATH_E eRFPath);
void rtl8192_BBConfig(struct net_device *dev);
void rtl8192_phy_getTxPower(struct net_device *dev);
void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel);
void rtl8192_phy_RFConfig(struct net_device *dev);
void rtl8192_phy_updateInitGain(struct net_device *dev);
u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev,
- RF90_RADIO_PATH_E eRFPath);
+ enum RF90_RADIO_PATH_E eRFPath);
u8 rtl8192_phy_SwChnl(struct net_device *dev, u8 channel);
void rtl8192_SetBWMode(struct net_device *dev,
--
2.18.0
next prev parent reply other threads:[~2018-07-13 11:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-13 11:22 [0/13] staging:rtl8192u: Coding style changes John Whitmore
2018-07-13 11:22 ` [PATCH 01/13] staging:rtl8192u: remove typedef of enumeration SwChnlCmdID - Style John Whitmore
2018-07-13 11:23 ` [PATCH 02/13] staging:rtl8192u: remove typdef from enumeration HW90_BLOCK_E " John Whitmore
2018-07-13 11:23 ` John Whitmore [this message]
2018-07-13 11:23 ` [PATCH 04/13] staging:rtl8192u: remove typedef from structure SwChnlCmd " John Whitmore
2018-07-13 11:23 ` [PATCH 05/13] staging:rtl8192u: Rename SwChnlCmdID > switch_chan_cmd_id - Coding Style John Whitmore
2018-07-13 11:23 ` [PATCH 06/13] staging:rtl8192u: Rename enum label CmdID_End > CMD_ID_END - Style John Whitmore
2018-07-13 11:23 ` [PATCH 07/13] staging:rtl8192u: rename CmdID_SetTxPowerLevel > CMD_ID_SET_TX_PWR_LEVEL John Whitmore
2018-07-13 11:23 ` [PATCH 08/13] staging:rtl8192u: Remove unused enum label CmdID_BBRegWrite10 John Whitmore
2018-07-13 11:23 ` [PATCH 09/13] staging:rtl8192u: Rename CmdID_WritePortUlong > CMD_ID_WRITE_PORT_ULONG John Whitmore
2018-07-13 11:23 ` [PATCH 10/13] staging:rtl8192u: Rename CmdID_WritePortUshort > CMD_ID_WRITE_PORT_USHORT John Whitmore
2018-07-13 11:23 ` [PATCH 11/13] staging:rtl8192u: Rename CmdID_WritePortUchar > CMD_ID_WRITE_PORT_UCHAR John Whitmore
2018-07-13 11:23 ` [PATCH 12/13] staging:rtl8192u: Rename CmdID_RF_WriteReg > CMD_ID_RF_WRITE_REG - Style John Whitmore
2018-07-13 11:23 ` [PATCH 13/13] staging:rtl8192u: Rename file macro to avoid camel case - Coding Style John Whitmore
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180713112311.544-4-johnfwhitmore@gmail.com \
--to=johnfwhitmore@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pombredanne@nexb.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.