All of lore.kernel.org
 help / color / mirror / Atom feed
From: Serge Semin <fancer.lancer@gmail.com>
To: jdmason@kudzu.us, dave.jiang@intel.com, allenbh@gmail.com
Cc: Sergey.Semin@t-platforms.ru, linux-ntb@googlegroups.com,
	linux-kernel@vger.kernel.org,
	Serge Semin <fancer.lancer@gmail.com>
Subject: [PATCH v2 2/4] ntb: idt: Add basic hwmon sysfs interface
Date: Tue, 17 Jul 2018 12:24:35 +0300	[thread overview]
Message-ID: <20180717092437.18918-3-fancer.lancer@gmail.com> (raw)
In-Reply-To: <20180717092437.18918-1-fancer.lancer@gmail.com>

IDT PCIe switches provide an embedded temperature sensor working
within [0; 127.5]C with resolution of 0.5C. They also can generate
a PCIe upstream interrupt in case if the temperature passes through
specified thresholds. Since this thresholds interface is very broken
the created hwmon-sysfs interface exposes only the next set of hwmon
nodes: current input temperature, lowest and highest values measured,
history resetting, value offset. HWmon alarm interface isn't provided.

IDT PCIe switch also've got an ADC/filter settings of the sensor.
This driver doesn't expose them to the hwmon-sysfs interface at the
moment, except the offset node.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
---

Changelog v2:
- Add "select HWMON" to the NTB_IDT kconfig

 drivers/ntb/hw/idt/Kconfig      |   1 +
 drivers/ntb/hw/idt/ntb_hw_idt.c | 182 ++++++++++++++++++++++++++++++++++++++++
 drivers/ntb/hw/idt/ntb_hw_idt.h |  24 +++++-
 3 files changed, 206 insertions(+), 1 deletion(-)

diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
index b360e5613b9f..2ed147368fa8 100644
--- a/drivers/ntb/hw/idt/Kconfig
+++ b/drivers/ntb/hw/idt/Kconfig
@@ -1,6 +1,7 @@
 config NTB_IDT
 	tristate "IDT PCIe-switch Non-Transparent Bridge support"
 	depends on PCI
+	select HWMON
 	help
 	 This driver supports NTB of cappable IDT PCIe-switches.
 
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
index c086ae5c601c..f12088c6a92d 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.c
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -49,11 +49,14 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/pci.h>
 #include <linux/aer.h>
 #include <linux/slab.h>
 #include <linux/list.h>
 #include <linux/debugfs.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/ntb.h>
 
 #include "ntb_hw_idt.h"
@@ -1925,6 +1928,153 @@ static void idt_read_temp(struct idt_ntb_dev *ndev,
 }
 
 /*
+ * idt_write_temp() - write temperature to the chip sensor register
+ * @ntb:	NTB device context.
+ * @type:	IN - type of the temperature value to change
+ * @val:	IN - integer value of temperature in millidegree Celsius
+ */
+static void idt_write_temp(struct idt_ntb_dev *ndev,
+			   const enum idt_temp_val type, const long val)
+{
+	unsigned int reg;
+	u32 data;
+	u8 fmt;
+
+	/* Retrieve the properly formatted temperature value */
+	fmt = idt_temp_get_fmt(val);
+
+	mutex_lock(&ndev->hwmon_mtx);
+	switch (type) {
+	case IDT_TEMP_LOW:
+		reg = IDT_SW_TMPALARM;
+		data = SET_FIELD(TMPALARM_LTEMP, idt_sw_read(ndev, reg), fmt) &
+			~IDT_TMPALARM_IRQ_MASK;
+		break;
+	case IDT_TEMP_HIGH:
+		reg = IDT_SW_TMPALARM;
+		data = SET_FIELD(TMPALARM_HTEMP, idt_sw_read(ndev, reg), fmt) &
+			~IDT_TMPALARM_IRQ_MASK;
+		break;
+	case IDT_TEMP_OFFSET:
+		reg = IDT_SW_TMPADJ;
+		data = SET_FIELD(TMPADJ_OFFSET, idt_sw_read(ndev, reg), fmt);
+		break;
+	default:
+		goto inval_spin_unlock;
+	}
+
+	idt_sw_write(ndev, reg, data);
+
+inval_spin_unlock:
+	mutex_unlock(&ndev->hwmon_mtx);
+}
+
+/*
+ * idt_sysfs_show_temp() - printout corresponding temperature value
+ * @dev:	Pointer to the NTB device structure
+ * @da:		Sensor device attribute structure
+ * @buf:	Buffer to print temperature out
+ *
+ * Return: Number of written symbols or negative error
+ */
+static ssize_t idt_sysfs_show_temp(struct device *dev,
+				   struct device_attribute *da, char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct idt_ntb_dev *ndev = dev_get_drvdata(dev);
+	enum idt_temp_val type = attr->index;
+	long mdeg;
+
+	idt_read_temp(ndev, type, &mdeg);
+	return sprintf(buf, "%ld\n", mdeg);
+}
+
+/*
+ * idt_sysfs_set_temp() - set corresponding temperature value
+ * @dev:	Pointer to the NTB device structure
+ * @da:		Sensor device attribute structure
+ * @buf:	Buffer to print temperature out
+ * @count:	Size of the passed buffer
+ *
+ * Return: Number of written symbols or negative error
+ */
+static ssize_t idt_sysfs_set_temp(struct device *dev,
+				  struct device_attribute *da, const char *buf,
+				  size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
+	struct idt_ntb_dev *ndev = dev_get_drvdata(dev);
+	enum idt_temp_val type = attr->index;
+	long mdeg;
+	int ret;
+
+	ret = kstrtol(buf, 10, &mdeg);
+	if (ret)
+		return ret;
+
+	/* Clamp the passed value in accordance with the type */
+	if (type == IDT_TEMP_OFFSET)
+		mdeg = clamp_val(mdeg, IDT_TEMP_MIN_OFFSET,
+				 IDT_TEMP_MAX_OFFSET);
+	else
+		mdeg = clamp_val(mdeg, IDT_TEMP_MIN_MDEG, IDT_TEMP_MAX_MDEG);
+
+	idt_write_temp(ndev, type, mdeg);
+
+	return count;
+}
+
+/*
+ * idt_sysfs_reset_hist() - reset temperature history
+ * @dev:	Pointer to the NTB device structure
+ * @da:		Sensor device attribute structure
+ * @buf:	Buffer to print temperature out
+ * @count:	Size of the passed buffer
+ *
+ * Return: Number of written symbols or negative error
+ */
+static ssize_t idt_sysfs_reset_hist(struct device *dev,
+				    struct device_attribute *da,
+				    const char *buf, size_t count)
+{
+	struct idt_ntb_dev *ndev = dev_get_drvdata(dev);
+
+	/* Just set the maximal value to the lowest temperature field and
+	 * minimal value to the highest temperature field
+	 */
+	idt_write_temp(ndev, IDT_TEMP_LOW, IDT_TEMP_MAX_MDEG);
+	idt_write_temp(ndev, IDT_TEMP_HIGH, IDT_TEMP_MIN_MDEG);
+
+	return count;
+}
+
+/*
+ * Hwmon IDT sysfs attributes
+ */
+static SENSOR_DEVICE_ATTR(temp1_input, 0444, idt_sysfs_show_temp, NULL,
+			  IDT_TEMP_CUR);
+static SENSOR_DEVICE_ATTR(temp1_lowest, 0444, idt_sysfs_show_temp, NULL,
+			  IDT_TEMP_LOW);
+static SENSOR_DEVICE_ATTR(temp1_highest, 0444, idt_sysfs_show_temp, NULL,
+			  IDT_TEMP_HIGH);
+static SENSOR_DEVICE_ATTR(temp1_offset, 0644, idt_sysfs_show_temp,
+			  idt_sysfs_set_temp, IDT_TEMP_OFFSET);
+static DEVICE_ATTR(temp1_reset_history, 0200, NULL, idt_sysfs_reset_hist);
+
+/*
+ * Hwmon IDT sysfs attributes group
+ */
+static struct attribute *idt_temp_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_lowest.dev_attr.attr,
+	&sensor_dev_attr_temp1_highest.dev_attr.attr,
+	&sensor_dev_attr_temp1_offset.dev_attr.attr,
+	&dev_attr_temp1_reset_history.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(idt_temp);
+
+/*
  * idt_temp_isr() - temperature sensor alarm events ISR
  * @ndev:	IDT NTB hardware driver descriptor
  * @ntint_sts:	NT-function interrupt status
@@ -1956,6 +2106,35 @@ static void idt_temp_isr(struct idt_ntb_dev *ndev, u32 ntint_sts)
 		idt_get_deg(mdeg), idt_get_deg_frac(mdeg));
 }
 
+/*
+ * idt_init_temp() - initialize temperature sensor interface
+ * @ndev:	IDT NTB hardware driver descriptor
+ *
+ * Simple sensor initializarion method is responsible for device switching
+ * on and resource management based hwmon interface registration. Note, that
+ * since the device is shared we won't disable it on remove, but leave it
+ * working until the system is powered off.
+ */
+static void idt_init_temp(struct idt_ntb_dev *ndev)
+{
+	struct device *hwmon;
+
+	/* Enable sensor if it hasn't been already */
+	idt_sw_write(ndev, IDT_SW_TMPCTL, 0x0);
+
+	/* Initialize hwmon interface fields */
+	mutex_init(&ndev->hwmon_mtx);
+
+	hwmon = devm_hwmon_device_register_with_groups(&ndev->ntb.pdev->dev,
+		ndev->swcfg->name, ndev, idt_temp_groups);
+	if (IS_ERR(hwmon)) {
+		dev_err(&ndev->ntb.pdev->dev, "Couldn't create hwmon device");
+		return;
+	}
+
+	dev_dbg(&ndev->ntb.pdev->dev, "Temperature HWmon interface registered");
+}
+
 /*=============================================================================
  *                           8. ISRs related operations
  *
@@ -2650,6 +2829,9 @@ static int idt_pci_probe(struct pci_dev *pdev,
 	/* Initialize Messaging subsystem */
 	idt_init_msg(ndev);
 
+	/* Initialize hwmon interface */
+	idt_init_temp(ndev);
+
 	/* Initialize IDT interrupts handler */
 	ret = idt_init_isr(ndev);
 	if (ret != 0)
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.h b/drivers/ntb/hw/idt/ntb_hw_idt.h
index 9dfd6b11a621..032f81cb4d44 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.h
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.h
@@ -47,9 +47,9 @@
 #include <linux/pci_ids.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
+#include <linux/mutex.h>
 #include <linux/ntb.h>
 
-
 /*
  * Macro is used to create the struct pci_device_id that matches
  * the supported IDT PCIe-switches
@@ -907,6 +907,10 @@
  * TMPSTS register fields related constants
  * @IDT_TMPSTS_TEMP_MASK:	Current temperature field mask
  * @IDT_TMPSTS_TEMP_FLD:	Current temperature field offset
+ * @IDT_TMPSTS_LTEMP_MASK:	Lowest temperature field mask
+ * @IDT_TMPSTS_LTEMP_FLD:	Lowest temperature field offset
+ * @IDT_TMPSTS_HTEMP_MASK:	Highest temperature field mask
+ * @IDT_TMPSTS_HTEMP_FLD:	Highest temperature field offset
  */
 #define IDT_TMPSTS_TEMP_MASK		0x000000FFU
 #define IDT_TMPSTS_TEMP_FLD		0
@@ -916,6 +920,20 @@
 #define IDT_TMPSTS_HTEMP_FLD		16
 
 /*
+ * TMPALARM register fields related constants
+ * @IDT_TMPALARM_LTEMP_MASK:	Lowest temperature field mask
+ * @IDT_TMPALARM_LTEMP_FLD:	Lowest temperature field offset
+ * @IDT_TMPALARM_HTEMP_MASK:	Highest temperature field mask
+ * @IDT_TMPALARM_HTEMP_FLD:	Highest temperature field offset
+ * @IDT_TMPALARM_IRQ_MASK:	Alarm IRQ status mask
+ */
+#define IDT_TMPALARM_LTEMP_MASK		0x0000FF00U
+#define IDT_TMPALARM_LTEMP_FLD		8
+#define IDT_TMPALARM_HTEMP_MASK		0x00FF0000U
+#define IDT_TMPALARM_HTEMP_FLD		16
+#define IDT_TMPALARM_IRQ_MASK		0x3F000000U
+
+/*
  * TMPADJ register fields related constants
  * @IDT_TMPADJ_OFFSET_MASK:	Temperature value offset field mask
  * @IDT_TMPADJ_OFFSET_FLD:	Temperature value offset field offset
@@ -1100,6 +1118,8 @@ struct idt_ntb_peer {
  * @msg_mask_lock:	Message mask register lock
  * @gasa_lock:		GASA registers access lock
  *
+ * @hwmon_mtx:		Temperature sensor interface update mutex
+ *
  * @dbgfs_info:		DebugFS info node
  */
 struct idt_ntb_dev {
@@ -1127,6 +1147,8 @@ struct idt_ntb_dev {
 	spinlock_t msg_mask_lock;
 	spinlock_t gasa_lock;
 
+	struct mutex hwmon_mtx;
+
 	struct dentry *dbgfs_info;
 };
 #define to_ndev_ntb(__ntb) container_of(__ntb, struct idt_ntb_dev, ntb)
-- 
2.12.0


  parent reply	other threads:[~2018-07-17  9:24 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-14 11:58 [PATCH 0/4] ntb: idt: Add hwmon temperature sensor interface Serge Semin
2018-07-14 11:58 ` [PATCH 1/4] ntb: idt: Alter temperature read method Serge Semin
2018-07-14 11:58 ` [PATCH 2/4] ntb: idt: Add basic hwmon sysfs interface Serge Semin
2018-07-17  1:28   ` kbuild test robot
2018-07-17  1:28   ` kbuild test robot
2018-07-14 11:58 ` [PATCH 3/4] ntb: idt: Discard temperature sensor IRQ handler Serge Semin
2018-07-14 11:58 ` [PATCH 4/4] ntb: idt: Alter the driver info comments Serge Semin
2018-07-17  9:24 ` [PATCH v2 0/4] ntb: idt: Add hwmon temperature sensor interface Serge Semin
2018-07-17  9:24   ` [PATCH v2 1/4] ntb: idt: Alter temperature read method Serge Semin
2018-07-17  9:24   ` Serge Semin [this message]
2018-07-17  9:24   ` [PATCH v2 3/4] ntb: idt: Discard temperature sensor IRQ handler Serge Semin
2018-07-17  9:24   ` [PATCH v2 4/4] ntb: idt: Alter the driver info comments Serge Semin
2018-11-01 14:35   ` [PATCH v2 0/4] ntb: idt: Add hwmon temperature sensor interface Jon Mason
2018-10-31 21:27 ` [PATCH " Jon Mason

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180717092437.18918-3-fancer.lancer@gmail.com \
    --to=fancer.lancer@gmail.com \
    --cc=Sergey.Semin@t-platforms.ru \
    --cc=allenbh@gmail.com \
    --cc=dave.jiang@intel.com \
    --cc=jdmason@kudzu.us \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-ntb@googlegroups.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.