diff for duplicates of <20180717195531.8587.4A936039@socionext.com> diff --git a/a/1.txt b/N1/1.txt index 618e604..363eb60 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -78,14 +78,14 @@ then I think it is reasonable to control Vbus by using phy regulator. > > + > > +Example: > > + -> > + usb-glue at 65b00000 { +> > + usb-glue@65b00000 { > > + compatible = "socionext,uniphier-ld20-dwc3-glue", > > + "simple-mfd"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0 0x65b00000 0x400>; > > + -> > + usb_hsphy0: hs-phy at 200 { +> > + usb_hsphy0: hs-phy@200 { > > + compatible = "socionext,uniphier-ld20-usb3-hsphy"; > > + reg = <0x200 0x10>; > > + #phy-cells = <0>; @@ -145,14 +145,14 @@ ditto. > > + > > +Example: > > + -> > + usb-glue at 65b00000 { +> > + usb-glue@65b00000 { > > + compatible = "socionext,uniphier-ld20-dwc3-glue", > > + "simple-mfd"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0 0x65b00000 0x400>; > > + -> > + usb_ssphy0: ss-phy at 300 { +> > + usb_ssphy0: ss-phy@300 { > > + compatible = "socionext,uniphier-ld20-usb3-ssphy"; > > + reg = <0x300 0x10>; > > + #phy-cells = <0>; diff --git a/a/content_digest b/N1/content_digest index 2ab3539..519c006 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,17 @@ "ref\01530261541-23104-2-git-send-email-hayashi.kunihiko@socionext.com\0" "ref\020180716205049.GA3663@rob-hp-laptop\0" - "From\0hayashi.kunihiko@socionext.com (Kunihiko Hayashi)\0" - "Subject\0[PATCH 1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver\0" + "From\0Kunihiko Hayashi <hayashi.kunihiko@socionext.com>\0" + "Subject\0Re: [PATCH 1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver\0" "Date\0Tue, 17 Jul 2018 19:55:32 +0900\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rob Herring <robh@kernel.org>\0" + "Cc\0Kishon Vijay Abraham I <kishon@ti.com>" + Mark Rutland <mark.rutland@arm.com> + Masahiro Yamada <yamada.masahiro@socionext.com> + linux-arm-kernel@lists.infradead.org + linux-kernel@vger.kernel.org + devicetree@vger.kernel.org + Masami Hiramatsu <masami.hiramatsu@linaro.org> + " Jassi Brar <jaswinder.singh@linaro.org>\0" "\00:1\0" "b\0" "Hi Rob,\n" @@ -86,14 +94,14 @@ "> > +\n" "> > +Example:\n" "> > +\n" - "> > +\tusb-glue at 65b00000 {\n" + "> > +\tusb-glue@65b00000 {\n" "> > +\t\tcompatible = \"socionext,uniphier-ld20-dwc3-glue\",\n" "> > +\t\t\t \"simple-mfd\";\n" "> > +\t\t#address-cells = <1>;\n" "> > +\t\t#size-cells = <1>;\n" "> > +\t\tranges = <0 0x65b00000 0x400>;\n" "> > +\n" - "> > +\t\tusb_hsphy0: hs-phy at 200 {\n" + "> > +\t\tusb_hsphy0: hs-phy@200 {\n" "> > +\t\t\tcompatible = \"socionext,uniphier-ld20-usb3-hsphy\";\n" "> > +\t\t\treg = <0x200 0x10>;\n" "> > +\t\t\t#phy-cells = <0>;\n" @@ -153,14 +161,14 @@ "> > +\n" "> > +Example:\n" "> > +\n" - "> > +\tusb-glue at 65b00000 {\n" + "> > +\tusb-glue@65b00000 {\n" "> > +\t\tcompatible = \"socionext,uniphier-ld20-dwc3-glue\",\n" "> > +\t\t\t \"simple-mfd\";\n" "> > +\t\t#address-cells = <1>;\n" "> > +\t\t#size-cells = <1>;\n" "> > +\t\tranges = <0 0x65b00000 0x400>;\n" "> > +\n" - "> > +\t\tusb_ssphy0: ss-phy at 300 {\n" + "> > +\t\tusb_ssphy0: ss-phy@300 {\n" "> > +\t\t\tcompatible = \"socionext,uniphier-ld20-usb3-ssphy\";\n" "> > +\t\t\treg = <0x300 0x10>;\n" "> > +\t\t\t#phy-cells = <0>;\n" @@ -183,4 +191,4 @@ "Best Regards,\n" Kunihiko Hayashi -dbd5aac7d65fce77c1c36ce8e535a87d71764789b935338f72d1a2aa317c508b +dfc15d31c01c9ff9b619b501a0f945ce5c2b861a6dc18bd0abc782be21ea74d3
diff --git a/a/1.txt b/N2/1.txt index 618e604..363eb60 100644 --- a/a/1.txt +++ b/N2/1.txt @@ -78,14 +78,14 @@ then I think it is reasonable to control Vbus by using phy regulator. > > + > > +Example: > > + -> > + usb-glue at 65b00000 { +> > + usb-glue@65b00000 { > > + compatible = "socionext,uniphier-ld20-dwc3-glue", > > + "simple-mfd"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0 0x65b00000 0x400>; > > + -> > + usb_hsphy0: hs-phy at 200 { +> > + usb_hsphy0: hs-phy@200 { > > + compatible = "socionext,uniphier-ld20-usb3-hsphy"; > > + reg = <0x200 0x10>; > > + #phy-cells = <0>; @@ -145,14 +145,14 @@ ditto. > > + > > +Example: > > + -> > + usb-glue at 65b00000 { +> > + usb-glue@65b00000 { > > + compatible = "socionext,uniphier-ld20-dwc3-glue", > > + "simple-mfd"; > > + #address-cells = <1>; > > + #size-cells = <1>; > > + ranges = <0 0x65b00000 0x400>; > > + -> > + usb_ssphy0: ss-phy at 300 { +> > + usb_ssphy0: ss-phy@300 { > > + compatible = "socionext,uniphier-ld20-usb3-ssphy"; > > + reg = <0x300 0x10>; > > + #phy-cells = <0>; diff --git a/a/content_digest b/N2/content_digest index 2ab3539..130d005 100644 --- a/a/content_digest +++ b/N2/content_digest @@ -1,9 +1,17 @@ "ref\01530261541-23104-2-git-send-email-hayashi.kunihiko@socionext.com\0" "ref\020180716205049.GA3663@rob-hp-laptop\0" - "From\0hayashi.kunihiko@socionext.com (Kunihiko Hayashi)\0" - "Subject\0[PATCH 1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver\0" + "From\0Kunihiko Hayashi <hayashi.kunihiko@socionext.com>\0" + "Subject\0Re: [PATCH 1/4] dt-bindings: phy: add DT bindings for UniPhier USB3 PHY driver\0" "Date\0Tue, 17 Jul 2018 19:55:32 +0900\0" - "To\0linux-arm-kernel@lists.infradead.org\0" + "To\0Rob Herring <robh@kernel.org>\0" + "Cc\0Kishon Vijay Abraham I <kishon@ti.com>" + Mark Rutland <mark.rutland@arm.com> + Masahiro Yamada <yamada.masahiro@socionext.com> + <linux-arm-kernel@lists.infradead.org> + <linux-kernel@vger.kernel.org> + <devicetree@vger.kernel.org> + Masami Hiramatsu <masami.hiramatsu@linaro.org> + " Jassi Brar <jaswinder.singh@linaro.org>\0" "\00:1\0" "b\0" "Hi Rob,\n" @@ -86,14 +94,14 @@ "> > +\n" "> > +Example:\n" "> > +\n" - "> > +\tusb-glue at 65b00000 {\n" + "> > +\tusb-glue@65b00000 {\n" "> > +\t\tcompatible = \"socionext,uniphier-ld20-dwc3-glue\",\n" "> > +\t\t\t \"simple-mfd\";\n" "> > +\t\t#address-cells = <1>;\n" "> > +\t\t#size-cells = <1>;\n" "> > +\t\tranges = <0 0x65b00000 0x400>;\n" "> > +\n" - "> > +\t\tusb_hsphy0: hs-phy at 200 {\n" + "> > +\t\tusb_hsphy0: hs-phy@200 {\n" "> > +\t\t\tcompatible = \"socionext,uniphier-ld20-usb3-hsphy\";\n" "> > +\t\t\treg = <0x200 0x10>;\n" "> > +\t\t\t#phy-cells = <0>;\n" @@ -153,14 +161,14 @@ "> > +\n" "> > +Example:\n" "> > +\n" - "> > +\tusb-glue at 65b00000 {\n" + "> > +\tusb-glue@65b00000 {\n" "> > +\t\tcompatible = \"socionext,uniphier-ld20-dwc3-glue\",\n" "> > +\t\t\t \"simple-mfd\";\n" "> > +\t\t#address-cells = <1>;\n" "> > +\t\t#size-cells = <1>;\n" "> > +\t\tranges = <0 0x65b00000 0x400>;\n" "> > +\n" - "> > +\t\tusb_ssphy0: ss-phy at 300 {\n" + "> > +\t\tusb_ssphy0: ss-phy@300 {\n" "> > +\t\t\tcompatible = \"socionext,uniphier-ld20-usb3-ssphy\";\n" "> > +\t\t\treg = <0x300 0x10>;\n" "> > +\t\t\t#phy-cells = <0>;\n" @@ -183,4 +191,4 @@ "Best Regards,\n" Kunihiko Hayashi -dbd5aac7d65fce77c1c36ce8e535a87d71764789b935338f72d1a2aa317c508b +e7dc34f70a02ef3acaa5a7a349501b594497a924dd528e770a95175a0c6e2a20
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.