From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Felipe Balbi <balbi@kernel.org>,
linux-usb@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [v1,2/2] dwc3: Supply device properties via driver data
Date: Fri, 20 Jul 2018 19:54:02 +0300 [thread overview]
Message-ID: <20180720165402.34375-2-andriy.shevchenko@linux.intel.com> (raw)
For now all PCI enumerated dwc3 devices require some properties
to be present. This allows us to unconditionally append them and supply
via driver_data.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
drivers/usb/dwc3/dwc3-pci.c | 145 +++++++++++++++---------------------
1 file changed, 61 insertions(+), 84 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 3958b7ae6588..9d3fff91e1bc 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -68,52 +68,45 @@ static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
{ },
};
+static const struct property_entry dwc3_pci_synopsys_properties[] = {
+ PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
+ PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+ PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+ {}
+};
+
+static const struct property_entry dwc3_pci_intel_properties[] = {
+ PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+ {}
+};
+
+static const struct property_entry dwc3_pci_amd_properties[] = {
+ PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
+ PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
+ PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
+ PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
+ /* FIXME these quirks should be removed when AMD NL tapes out */
+ PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
+ PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
+ {}
+};
+
static int dwc3_pci_quirks(struct dwc3_pci *dwc)
{
- struct platform_device *dwc3 = dwc->dwc3;
struct pci_dev *pdev = dwc->pci;
- if (pdev->vendor == PCI_VENDOR_ID_AMD &&
- pdev->device == PCI_DEVICE_ID_AMD_NL_USB) {
- struct property_entry properties[] = {
- PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
- PROPERTY_ENTRY_U8("snps,lpm-nyet-threshold", 0xf),
- PROPERTY_ENTRY_BOOL("snps,u2exit_lfps_quirk"),
- PROPERTY_ENTRY_BOOL("snps,u2ss_inp3_quirk"),
- PROPERTY_ENTRY_BOOL("snps,req_p1p2p3_quirk"),
- PROPERTY_ENTRY_BOOL("snps,del_p1p2p3_quirk"),
- PROPERTY_ENTRY_BOOL("snps,del_phy_power_chg_quirk"),
- PROPERTY_ENTRY_BOOL("snps,lfps_filter_quirk"),
- PROPERTY_ENTRY_BOOL("snps,rx_detect_poll_quirk"),
- PROPERTY_ENTRY_BOOL("snps,tx_de_emphasis_quirk"),
- PROPERTY_ENTRY_U8("snps,tx_de_emphasis", 1),
- /*
- * FIXME these quirks should be removed when AMD NL
- * tapes out
- */
- PROPERTY_ENTRY_BOOL("snps,disable_scramble_quirk"),
- PROPERTY_ENTRY_BOOL("snps,dis_u3_susphy_quirk"),
- PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"),
- PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
- { },
- };
-
- return platform_device_add_properties(dwc3, properties);
- }
-
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
- int ret;
-
- struct property_entry properties[] = {
- PROPERTY_ENTRY_STRING("dr_mode", "peripheral"),
- PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
- { }
- };
-
- ret = platform_device_add_properties(dwc3, properties);
- if (ret < 0)
- return ret;
-
if (pdev->device == PCI_DEVICE_ID_INTEL_BXT ||
pdev->device == PCI_DEVICE_ID_INTEL_BXT_M) {
guid_parse(PCI_INTEL_BXT_DSM_GUID, &dwc->guid);
@@ -122,6 +115,7 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
if (pdev->device == PCI_DEVICE_ID_INTEL_BYT) {
struct gpio_desc *gpio;
+ int ret;
ret = devm_acpi_dev_add_driver_gpios(&pdev->dev,
acpi_dwc3_byt_gpios);
@@ -152,21 +146,6 @@ static int dwc3_pci_quirks(struct dwc3_pci *dwc)
}
}
- if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
- (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
- pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
- pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
- struct property_entry properties[] = {
- PROPERTY_ENTRY_BOOL("snps,usb3_lpm_capable"),
- PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
- PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
- PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
- { },
- };
-
- return platform_device_add_properties(dwc3, properties);
- }
-
return 0;
}
@@ -186,9 +165,9 @@ static void dwc3_pci_resume_work(struct work_struct *work)
}
#endif
-static int dwc3_pci_probe(struct pci_dev *pci,
- const struct pci_device_id *id)
+static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
{
+ struct property_entry *p = (struct property_entry *)id->driver_data;
struct dwc3_pci *dwc;
struct resource res[2];
int ret;
@@ -231,6 +210,10 @@ static int dwc3_pci_probe(struct pci_dev *pci,
dwc->dwc3->dev.parent = dev;
ACPI_COMPANION_SET(&dwc->dwc3->dev, ACPI_COMPANION(dev));
+ ret = platform_device_add_properties(dwc->dwc3, p);
+ if (ret < 0)
+ return ret;
+
ret = dwc3_pci_quirks(dwc);
if (ret)
goto err;
@@ -266,33 +249,27 @@ static void dwc3_pci_remove(struct pci_dev *pci)
platform_device_unregister(dwc->dwc3);
}
+#define DWC3_PCI_DEV(v, d, data) \
+ { PCI_VDEVICE(v, PCI_DEVICE_ID_##d), (kernel_ulong_t)&data }
+
static const struct pci_device_id dwc3_pci_id_table[] = {
- {
- PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
- PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
- },
- {
- PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
- PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
- },
- {
- PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
- PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
- },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), },
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICLLP), },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
+ DWC3_PCI_DEV(SYNOPSYS, SYNOPSYS_HAPSUSB3, dwc3_pci_synopsys_properties),
+ DWC3_PCI_DEV(SYNOPSYS, SYNOPSYS_HAPSUSB3_AXI, dwc3_pci_synopsys_properties),
+ DWC3_PCI_DEV(SYNOPSYS, SYNOPSYS_HAPSUSB31, dwc3_pci_synopsys_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_BSW, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_BYT, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_MRFLD, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_SPTLP, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_SPTH, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_BXT, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_BXT_M, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_APL, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_KBP, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_GLK, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_CNPLP, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_CNPH, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(INTEL, INTEL_ICLLP, dwc3_pci_intel_properties),
+ DWC3_PCI_DEV(AMD, AMD_NL_USB, dwc3_pci_amd_properties),
{ } /* Terminating Entry */
};
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
next reply other threads:[~2018-07-20 16:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-20 16:54 Andy Shevchenko [this message]
-- strict thread matches above, loose matches on Subject: below --
2018-07-26 11:06 [v1,2/2] dwc3: Supply device properties via driver data Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180720165402.34375-2-andriy.shevchenko@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.