From: Sakari Ailus <sakari.ailus@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: devicetree@vger.kernel.org, slongerbeam@gmail.com,
niklas.soderlund@ragnatech.se
Subject: [PATCH 07/21] v4l: mediabus: Recognise CSI-2 D-PHY and C-PHY
Date: Mon, 23 Jul 2018 16:46:52 +0300 [thread overview]
Message-ID: <20180723134706.15334-8-sakari.ailus@linux.intel.com> (raw)
In-Reply-To: <20180723134706.15334-1-sakari.ailus@linux.intel.com>
The CSI-2 bus may use either D-PHY or C-PHY. Make this visible in media
bus enum.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
---
drivers/gpu/ipu-v3/ipu-csi.c | 2 +-
drivers/media/i2c/adv7180.c | 2 +-
drivers/media/i2c/ov5640.c | 4 ++--
drivers/media/i2c/ov5645.c | 2 +-
drivers/media/i2c/ov7251.c | 4 ++--
drivers/media/i2c/s5c73m3/s5c73m3-core.c | 2 +-
drivers/media/i2c/s5k5baf.c | 4 ++--
drivers/media/i2c/s5k6aa.c | 2 +-
drivers/media/i2c/smiapp/smiapp-core.c | 2 +-
drivers/media/i2c/soc_camera/ov5642.c | 2 +-
drivers/media/i2c/tc358743.c | 4 ++--
drivers/media/pci/intel/ipu3/ipu3-cio2.c | 2 +-
drivers/media/platform/cadence/cdns-csi2rx.c | 2 +-
drivers/media/platform/cadence/cdns-csi2tx.c | 2 +-
drivers/media/platform/marvell-ccic/mcam-core.c | 4 ++--
drivers/media/platform/marvell-ccic/mmp-driver.c | 2 +-
drivers/media/platform/omap3isp/isp.c | 2 +-
drivers/media/platform/pxa_camera.c | 2 +-
drivers/media/platform/rcar-vin/rcar-csi2.c | 2 +-
drivers/media/platform/soc_camera/soc_mediabus.c | 2 +-
drivers/media/platform/stm32/stm32-dcmi.c | 2 +-
drivers/media/platform/ti-vpe/cal.c | 2 +-
drivers/media/v4l2-core/v4l2-fwnode.c | 2 +-
drivers/staging/media/imx/imx-media-csi.c | 2 +-
drivers/staging/media/imx/imx6-mipi-csi2.c | 2 +-
drivers/staging/media/imx074/imx074.c | 2 +-
include/media/v4l2-mediabus.h | 6 ++++--
27 files changed, 35 insertions(+), 33 deletions(-)
diff --git a/drivers/gpu/ipu-v3/ipu-csi.c b/drivers/gpu/ipu-v3/ipu-csi.c
index caa05b0702e1..4bc12d7b0b49 100644
--- a/drivers/gpu/ipu-v3/ipu-csi.c
+++ b/drivers/gpu/ipu-v3/ipu-csi.c
@@ -344,7 +344,7 @@ static void fill_csi_bus_cfg(struct ipu_csi_bus_config *csicfg,
else
csicfg->clk_mode = IPU_CSI_CLK_MODE_CCIR656_PROGRESSIVE;
break;
- case V4L2_MBUS_CSI2:
+ case V4L2_MBUS_CSI2_DPHY:
/*
* MIPI CSI-2 requires non gated clock mode, all other
* parameters are not applicable for MIPI CSI-2 bus.
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 25d24a3f10a7..8241eb0c095d 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -742,7 +742,7 @@ static int adv7180_g_mbus_config(struct v4l2_subdev *sd,
struct adv7180_state *state = to_state(sd);
if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
- cfg->type = V4L2_MBUS_CSI2;
+ cfg->type = V4L2_MBUS_CSI2_DPHY;
cfg->flags = V4L2_MBUS_CSI2_1_LANE |
V4L2_MBUS_CSI2_CHANNEL_0 |
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 071f4bc240ca..942531aaae92 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -1786,7 +1786,7 @@ static int ov5640_set_power(struct ov5640_dev *sensor, bool on)
if (ret)
goto power_off;
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2) {
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
/*
* start streaming briefly followed by stream off in
* order to coax the clock lane into LP-11 state.
@@ -2550,7 +2550,7 @@ static int ov5640_s_stream(struct v4l2_subdev *sd, int enable)
goto out;
}
- if (sensor->ep.bus_type == V4L2_MBUS_CSI2)
+ if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY)
ret = ov5640_set_stream_mipi(sensor, enable);
else
ret = ov5640_set_stream_dvp(sensor, enable);
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
index 1722cdab0daf..5eba8dd7222b 100644
--- a/drivers/media/i2c/ov5645.c
+++ b/drivers/media/i2c/ov5645.c
@@ -1127,7 +1127,7 @@ static int ov5645_probe(struct i2c_client *client,
return ret;
}
- if (ov5645->ep.bus_type != V4L2_MBUS_CSI2) {
+ if (ov5645->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(dev, "invalid bus type, must be CSI2\n");
return -EINVAL;
}
diff --git a/drivers/media/i2c/ov7251.c b/drivers/media/i2c/ov7251.c
index d3ebb7529fca..0c10203f822b 100644
--- a/drivers/media/i2c/ov7251.c
+++ b/drivers/media/i2c/ov7251.c
@@ -1279,9 +1279,9 @@ static int ov7251_probe(struct i2c_client *client)
return ret;
}
- if (ov7251->ep.bus_type != V4L2_MBUS_CSI2) {
+ if (ov7251->ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(dev, "invalid bus type (%u), must be CSI2 (%u)\n",
- ov7251->ep.bus_type, V4L2_MBUS_CSI2);
+ ov7251->ep.bus_type, V4L2_MBUS_CSI2_DPHY);
return -EINVAL;
}
diff --git a/drivers/media/i2c/s5c73m3/s5c73m3-core.c b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
index ce196b60f917..9d5739cafec3 100644
--- a/drivers/media/i2c/s5c73m3/s5c73m3-core.c
+++ b/drivers/media/i2c/s5c73m3/s5c73m3-core.c
@@ -1644,7 +1644,7 @@ static int s5c73m3_get_platform_data(struct s5c73m3 *state)
if (ret)
return ret;
- if (ep.bus_type != V4L2_MBUS_CSI2) {
+ if (ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(dev, "unsupported bus type\n");
return -EINVAL;
}
diff --git a/drivers/media/i2c/s5k5baf.c b/drivers/media/i2c/s5k5baf.c
index 5007c9659342..4c41a770b132 100644
--- a/drivers/media/i2c/s5k5baf.c
+++ b/drivers/media/i2c/s5k5baf.c
@@ -766,7 +766,7 @@ static int s5k5baf_hw_set_video_bus(struct s5k5baf *state)
{
u16 en_pkts;
- if (state->bus_type == V4L2_MBUS_CSI2)
+ if (state->bus_type == V4L2_MBUS_CSI2_DPHY)
en_pkts = EN_PACKETS_CSI2;
else
en_pkts = 0;
@@ -1875,7 +1875,7 @@ static int s5k5baf_parse_device_node(struct s5k5baf *state, struct device *dev)
state->bus_type = ep.bus_type;
switch (state->bus_type) {
- case V4L2_MBUS_CSI2:
+ case V4L2_MBUS_CSI2_DPHY:
state->nlanes = ep.bus.mipi_csi2.num_data_lanes;
break;
case V4L2_MBUS_PARALLEL:
diff --git a/drivers/media/i2c/s5k6aa.c b/drivers/media/i2c/s5k6aa.c
index 13c10b5e2b45..5f097ae7a5b1 100644
--- a/drivers/media/i2c/s5k6aa.c
+++ b/drivers/media/i2c/s5k6aa.c
@@ -688,7 +688,7 @@ static int s5k6aa_configure_video_bus(struct s5k6aa *s5k6aa,
* but there is nothing indicating how to switch between both
* in the datasheet. For now default BT.601 interface is assumed.
*/
- if (bus_type == V4L2_MBUS_CSI2)
+ if (bus_type == V4L2_MBUS_CSI2_DPHY)
cfg = nlanes;
else if (bus_type != V4L2_MBUS_PARALLEL)
return -EINVAL;
diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c
index 1236683da8f7..9e33c2008ba6 100644
--- a/drivers/media/i2c/smiapp/smiapp-core.c
+++ b/drivers/media/i2c/smiapp/smiapp-core.c
@@ -2784,7 +2784,7 @@ static struct smiapp_hwconfig *smiapp_get_hwconfig(struct device *dev)
goto out_err;
switch (bus_cfg->bus_type) {
- case V4L2_MBUS_CSI2:
+ case V4L2_MBUS_CSI2_DPHY:
hwcfg->csi_signalling_mode = SMIAPP_CSI_SIGNALLING_MODE_CSI2;
hwcfg->lanes = bus_cfg->bus.mipi_csi2.num_data_lanes;
break;
diff --git a/drivers/media/i2c/soc_camera/ov5642.c b/drivers/media/i2c/soc_camera/ov5642.c
index 39f420db9c70..bc045259510d 100644
--- a/drivers/media/i2c/soc_camera/ov5642.c
+++ b/drivers/media/i2c/soc_camera/ov5642.c
@@ -913,7 +913,7 @@ static int ov5642_get_selection(struct v4l2_subdev *sd,
static int ov5642_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
- cfg->type = V4L2_MBUS_CSI2;
+ cfg->type = V4L2_MBUS_CSI2_DPHY;
cfg->flags = V4L2_MBUS_CSI2_2_LANE | V4L2_MBUS_CSI2_CHANNEL_0 |
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c
index 44c41933415a..6a2064597124 100644
--- a/drivers/media/i2c/tc358743.c
+++ b/drivers/media/i2c/tc358743.c
@@ -1607,7 +1607,7 @@ static int tc358743_g_mbus_config(struct v4l2_subdev *sd,
{
struct tc358743_state *state = to_state(sd);
- cfg->type = V4L2_MBUS_CSI2;
+ cfg->type = V4L2_MBUS_CSI2_DPHY;
/* Support for non-continuous CSI-2 clock is missing in the driver */
cfg->flags = V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
@@ -1922,7 +1922,7 @@ static int tc358743_probe_of(struct tc358743_state *state)
goto put_node;
}
- if (endpoint->bus_type != V4L2_MBUS_CSI2 ||
+ if (endpoint->bus_type != V4L2_MBUS_CSI2_DPHY ||
endpoint->bus.mipi_csi2.num_data_lanes == 0 ||
endpoint->nr_of_link_frequencies == 0) {
dev_err(dev, "missing CSI-2 properties in endpoint\n");
diff --git a/drivers/media/pci/intel/ipu3/ipu3-cio2.c b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
index 4a5f7c3360bc..f2e1942d2979 100644
--- a/drivers/media/pci/intel/ipu3/ipu3-cio2.c
+++ b/drivers/media/pci/intel/ipu3/ipu3-cio2.c
@@ -1484,7 +1484,7 @@ static int cio2_fwnode_parse(struct device *dev,
struct sensor_async_subdev *s_asd =
container_of(asd, struct sensor_async_subdev, asd);
- if (vep->bus_type != V4L2_MBUS_CSI2) {
+ if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(dev, "Only CSI2 bus type is currently supported\n");
return -EINVAL;
}
diff --git a/drivers/media/platform/cadence/cdns-csi2rx.c b/drivers/media/platform/cadence/cdns-csi2rx.c
index 43e43c7b3e98..0a1fcb76cf34 100644
--- a/drivers/media/platform/cadence/cdns-csi2rx.c
+++ b/drivers/media/platform/cadence/cdns-csi2rx.c
@@ -378,7 +378,7 @@ static int csi2rx_parse_dt(struct csi2rx_priv *csi2rx)
return ret;
}
- if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(csi2rx->dev, "Unsupported media bus type: 0x%x\n",
v4l2_ep.bus_type);
of_node_put(ep);
diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c
index 40d0de690ff4..6224daf891d7 100644
--- a/drivers/media/platform/cadence/cdns-csi2tx.c
+++ b/drivers/media/platform/cadence/cdns-csi2tx.c
@@ -446,7 +446,7 @@ static int csi2tx_check_lanes(struct csi2tx_priv *csi2tx)
goto out;
}
- if (v4l2_ep.bus_type != V4L2_MBUS_CSI2) {
+ if (v4l2_ep.bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(csi2tx->dev, "Unsupported media bus type: 0x%x\n",
v4l2_ep.bus_type);
ret = -EINVAL;
diff --git a/drivers/media/platform/marvell-ccic/mcam-core.c b/drivers/media/platform/marvell-ccic/mcam-core.c
index dfdbd4354b74..5e20427aeca2 100644
--- a/drivers/media/platform/marvell-ccic/mcam-core.c
+++ b/drivers/media/platform/marvell-ccic/mcam-core.c
@@ -794,7 +794,7 @@ static void mcam_ctlr_image(struct mcam_camera *cam)
/*
* This field controls the generation of EOF(DVP only)
*/
- if (cam->bus_type != V4L2_MBUS_CSI2)
+ if (cam->bus_type != V4L2_MBUS_CSI2_DPHY)
mcam_reg_set_bit(cam, REG_CTRL0,
C0_EOF_VSYNC | C0_VEDGE_CTRL);
}
@@ -1023,7 +1023,7 @@ static int mcam_read_setup(struct mcam_camera *cam)
cam->calc_dphy(cam);
cam_dbg(cam, "camera: DPHY sets: dphy3=0x%x, dphy5=0x%x, dphy6=0x%x\n",
cam->dphy[0], cam->dphy[1], cam->dphy[2]);
- if (cam->bus_type == V4L2_MBUS_CSI2)
+ if (cam->bus_type == V4L2_MBUS_CSI2_DPHY)
mcam_enable_mipi(cam);
else
mcam_disable_mipi(cam);
diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c b/drivers/media/platform/marvell-ccic/mmp-driver.c
index 6d9f0abb2660..25ce31b71a45 100644
--- a/drivers/media/platform/marvell-ccic/mmp-driver.c
+++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
@@ -362,7 +362,7 @@ static int mmpcam_probe(struct platform_device *pdev)
mcam->mclk_div = pdata->mclk_div;
mcam->bus_type = pdata->bus_type;
mcam->dphy = pdata->dphy;
- if (mcam->bus_type == V4L2_MBUS_CSI2) {
+ if (mcam->bus_type == V4L2_MBUS_CSI2_DPHY) {
cam->mipi_clk = devm_clk_get(mcam->dev, "mipi");
if ((IS_ERR(cam->mipi_clk) && mcam->dphy[2] == 0))
return PTR_ERR(cam->mipi_clk);
diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c
index 1211bfe9cda1..a7fde7fc00b2 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2054,7 +2054,7 @@ static int isp_fwnode_parse(struct device *dev,
dev_dbg(dev, "CSI-1/CCP-2 configuration\n");
csi1 = true;
break;
- case V4L2_MBUS_CSI2:
+ case V4L2_MBUS_CSI2_DPHY:
dev_dbg(dev, "CSI-2 configuration\n");
csi1 = false;
break;
diff --git a/drivers/media/platform/pxa_camera.c b/drivers/media/platform/pxa_camera.c
index d85ffbfb7c1f..bbb7a77eeb78 100644
--- a/drivers/media/platform/pxa_camera.c
+++ b/drivers/media/platform/pxa_camera.c
@@ -633,7 +633,7 @@ static unsigned int pxa_mbus_config_compatible(const struct v4l2_mbus_config *cf
mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE);
return (!hsync || !vsync || !pclk || !data || !mode) ?
0 : common_flags;
- case V4L2_MBUS_CSI2:
+ case V4L2_MBUS_CSI2_DPHY:
mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES;
mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK);
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c
index daef72d410a3..45aa10d23dc3 100644
--- a/drivers/media/platform/rcar-vin/rcar-csi2.c
+++ b/drivers/media/platform/rcar-vin/rcar-csi2.c
@@ -706,7 +706,7 @@ static int rcsi2_parse_v4l2(struct rcar_csi2 *priv,
if (vep->base.port || vep->base.id)
return -ENOTCONN;
- if (vep->bus_type != V4L2_MBUS_CSI2) {
+ if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
dev_err(priv->dev, "Unsupported bus: %u\n", vep->bus_type);
return -EINVAL;
}
diff --git a/drivers/media/platform/soc_camera/soc_mediabus.c b/drivers/media/platform/soc_camera/soc_mediabus.c
index 0ad4b28266e4..be74008ec0ca 100644
--- a/drivers/media/platform/soc_camera/soc_mediabus.c
+++ b/drivers/media/platform/soc_camera/soc_mediabus.c
@@ -503,7 +503,7 @@ unsigned int soc_mbus_config_compatible(const struct v4l2_mbus_config *cfg,
mode = common_flags & (V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE);
return (!hsync || !vsync || !pclk || !data || !mode) ?
0 : common_flags;
- case V4L2_MBUS_CSI2:
+ case V4L2_MBUS_CSI2_DPHY:
mipi_lanes = common_flags & V4L2_MBUS_CSI2_LANES;
mipi_clock = common_flags & (V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK |
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK);
diff --git a/drivers/media/platform/stm32/stm32-dcmi.c b/drivers/media/platform/stm32/stm32-dcmi.c
index 721564176d8c..56a331392769 100644
--- a/drivers/media/platform/stm32/stm32-dcmi.c
+++ b/drivers/media/platform/stm32/stm32-dcmi.c
@@ -1663,7 +1663,7 @@ static int dcmi_probe(struct platform_device *pdev)
return -ENODEV;
}
- if (ep.bus_type == V4L2_MBUS_CSI2) {
+ if (ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
dev_err(&pdev->dev, "CSI bus not supported\n");
return -ENODEV;
}
diff --git a/drivers/media/platform/ti-vpe/cal.c b/drivers/media/platform/ti-vpe/cal.c
index d1febe5baa6d..887af872b0fd 100644
--- a/drivers/media/platform/ti-vpe/cal.c
+++ b/drivers/media/platform/ti-vpe/cal.c
@@ -1711,7 +1711,7 @@ static int of_cal_create_instance(struct cal_ctx *ctx, int inst)
}
v4l2_fwnode_endpoint_parse(of_fwnode_handle(remote_ep), endpoint);
- if (endpoint->bus_type != V4L2_MBUS_CSI2) {
+ if (endpoint->bus_type != V4L2_MBUS_CSI2_DPHY) {
ctx_err(ctx, "Port:%d sub-device %s is not a CSI2 device\n",
inst, sensor_node->name);
goto cleanup_exit;
diff --git a/drivers/media/v4l2-core/v4l2-fwnode.c b/drivers/media/v4l2-core/v4l2-fwnode.c
index 4c98d17ab124..85f409808042 100644
--- a/drivers/media/v4l2-core/v4l2-fwnode.c
+++ b/drivers/media/v4l2-core/v4l2-fwnode.c
@@ -117,7 +117,7 @@ static int v4l2_fwnode_endpoint_parse_csi2_bus(struct fwnode_handle *fwnode,
if (lanes_used || have_clk_lane ||
(flags & ~V4L2_MBUS_CSI2_CONTINUOUS_CLOCK)) {
bus->flags = flags;
- vep->bus_type = V4L2_MBUS_CSI2;
+ vep->bus_type = V4L2_MBUS_CSI2_DPHY;
}
return 0;
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 19ef3771b7b1..7f5932618ab1 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -124,7 +124,7 @@ static inline struct csi_priv *sd_to_dev(struct v4l2_subdev *sdev)
static inline bool is_parallel_bus(struct v4l2_fwnode_endpoint *ep)
{
- return ep->bus_type != V4L2_MBUS_CSI2;
+ return ep->bus_type != V4L2_MBUS_CSI2_DPHY;
}
static inline bool is_parallel_16bit_bus(struct v4l2_fwnode_endpoint *ep)
diff --git a/drivers/staging/media/imx/imx6-mipi-csi2.c b/drivers/staging/media/imx/imx6-mipi-csi2.c
index 94eb9a1f38bb..74438a4c1267 100644
--- a/drivers/staging/media/imx/imx6-mipi-csi2.c
+++ b/drivers/staging/media/imx/imx6-mipi-csi2.c
@@ -563,7 +563,7 @@ static int csi2_parse_endpoint(struct device *dev,
return -EINVAL;
}
- if (vep->bus_type != V4L2_MBUS_CSI2) {
+ if (vep->bus_type != V4L2_MBUS_CSI2_DPHY) {
v4l2_err(&csi2->sd, "invalid bus type, must be MIPI CSI2\n");
return -EINVAL;
}
diff --git a/drivers/staging/media/imx074/imx074.c b/drivers/staging/media/imx074/imx074.c
index 77f1e0243d6e..0eee9f0def4d 100644
--- a/drivers/staging/media/imx074/imx074.c
+++ b/drivers/staging/media/imx074/imx074.c
@@ -263,7 +263,7 @@ static int imx074_s_power(struct v4l2_subdev *sd, int on)
static int imx074_g_mbus_config(struct v4l2_subdev *sd,
struct v4l2_mbus_config *cfg)
{
- cfg->type = V4L2_MBUS_CSI2;
+ cfg->type = V4L2_MBUS_CSI2_DPHY;
cfg->flags = V4L2_MBUS_CSI2_2_LANE |
V4L2_MBUS_CSI2_CHANNEL_0 |
V4L2_MBUS_CSI2_CONTINUOUS_CLOCK;
diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h
index 66d74c813f53..df1d552e9df6 100644
--- a/include/media/v4l2-mediabus.h
+++ b/include/media/v4l2-mediabus.h
@@ -76,7 +76,8 @@
* also be used for BT.1120
* @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface
* @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2)
- * @V4L2_MBUS_CSI2: MIPI CSI-2 serial interface
+ * @V4L2_MBUS_CSI2_DPHY: MIPI CSI-2 serial interface, with D-PHY
+ * @V4L2_MBUS_CSI2_CPHY: MIPI CSI-2 serial interface, with C-PHY
*/
enum v4l2_mbus_type {
V4L2_MBUS_UNKNOWN,
@@ -84,7 +85,8 @@ enum v4l2_mbus_type {
V4L2_MBUS_BT656,
V4L2_MBUS_CSI1,
V4L2_MBUS_CCP2,
- V4L2_MBUS_CSI2,
+ V4L2_MBUS_CSI2_DPHY,
+ V4L2_MBUS_CSI2_CPHY,
};
/**
--
2.11.0
next prev parent reply other threads:[~2018-07-23 14:48 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 13:46 [PATCH 00/21] V4L2 fwnode rework; support for default configuration Sakari Ailus
2018-07-23 13:46 ` [PATCH 01/21] v4l: fwnode: Add debug prints for V4L2 endpoint property parsing Sakari Ailus
2018-07-23 13:46 ` [PATCH 02/21] v4l: fwnode: Use fwnode_graph_for_each_endpoint Sakari Ailus
2018-07-23 13:46 ` [PATCH 03/21] v4l: fwnode: Detect bus type correctly Sakari Ailus
2018-07-23 13:46 ` [PATCH 04/21] v4l: fwnode: The CSI-2 clock is continuous if it's not non-continuous Sakari Ailus
2018-07-23 13:46 ` [PATCH 05/21] dt-bindings: media: Specify bus type for MIPI D-PHY, others, explicitly Sakari Ailus
2018-07-31 21:32 ` Rob Herring
2018-08-01 11:16 ` Sakari Ailus
2018-08-16 9:17 ` Sakari Ailus
2018-08-16 13:48 ` Rob Herring
2018-08-16 14:16 ` Sakari Ailus
2018-07-23 13:46 ` [PATCH 06/21] v4l: fwnode: Add definitions for CSI-2 D-PHY, parallel and Bt.656 busses Sakari Ailus
2018-07-23 13:46 ` Sakari Ailus [this message]
2018-07-23 13:46 ` [PATCH 08/21] v4l: fwnode: Make use of newly specified bus types Sakari Ailus
2018-07-23 13:46 ` [PATCH 09/21] v4l: fwnode: Read lane inversion information despite lane numbering Sakari Ailus
2018-07-23 13:46 ` [PATCH 10/21] v4l: fwnode: Only assign configuration if there is no error Sakari Ailus
2018-07-23 13:46 ` [PATCH 11/21] v4l: fwnode: Support driver-defined lane mapping defaults Sakari Ailus
2018-07-23 13:46 ` [PATCH 12/21] v4l: fwnode: Support default CSI-2 lane mapping for drivers Sakari Ailus
2018-07-23 13:46 ` [PATCH 13/21] v4l: fwnode: Parse the graph endpoint as last Sakari Ailus
2018-07-23 13:46 ` [PATCH 14/21] v4l: fwnode: Use default parallel flags Sakari Ailus
2018-07-23 13:47 ` [PATCH 15/21] v4l: fwnode: Allow setting default parameters Sakari Ailus
2018-07-23 13:47 ` [PATCH 16/21] v4l: fwnode: Use media bus type for bus parser selection Sakari Ailus
2018-07-23 13:47 ` [PATCH 17/21] v4l: fwnode: Print bus type Sakari Ailus
2018-07-23 13:47 ` [PATCH 18/21] v4l: fwnode: Use V4L2 fwnode endpoint media bus type if set Sakari Ailus
2018-07-23 13:47 ` [PATCH 19/21] v4l: fwnode: Support parsing of CSI-2 C-PHY endpoints Sakari Ailus
2018-07-23 13:47 ` [PATCH 20/21] v4l: fwnode: Update V4L2 fwnode endpoint parsing documentation Sakari Ailus
2018-07-23 13:47 ` [PATCH 21/21] smiapp: Query the V4L2 endpoint for a specific bus type Sakari Ailus
2018-08-10 10:38 ` [PATCH 00/21] V4L2 fwnode rework; support for default configuration jacopo mondi
2018-08-13 7:31 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180723134706.15334-8-sakari.ailus@linux.intel.com \
--to=sakari.ailus@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=niklas.soderlund@ragnatech.se \
--cc=slongerbeam@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.