From: Douglas Anderson <dianders@chromium.org>
To: sboyd@kernel.org, andy.gross@linaro.org
Cc: tdas@codeaurora.org, grahamr@codeaurora.org,
girishm@codeaurora.org, anischal@codeaurora.org,
bjorn.andersson@linaro.org,
Douglas Anderson <dianders@chromium.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
David Brown <david.brown@linaro.org>,
linux-soc@vger.kernel.org, linux-clk@vger.kernel.org
Subject: [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
Date: Mon, 23 Jul 2018 14:54:04 -0700 [thread overview]
Message-ID: <20180723215404.74296-3-dianders@chromium.org> (raw)
In-Reply-To: <20180723215404.74296-1-dianders@chromium.org>
Add both the interface and core clock.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
---
Changes in v2:
- Only 19.2, 100, 150, and 300 MHz now.
- All clocks come from MAIN rather than EVEN.
- Use parent map 0 instead of new parent map 9.
drivers/clk/qcom/gcc-sdm845.c | 63 +++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
index 0f694ed4238a..5bca634e277a 100644
--- a/drivers/clk/qcom/gcc-sdm845.c
+++ b/drivers/clk/qcom/gcc-sdm845.c
@@ -162,6 +162,13 @@ static const char * const gcc_parent_names_10[] = {
"core_bi_pll_test_se",
};
+static const char * const gcc_parent_names_9[] = {
+ "bi_tcxo",
+ "gpll0",
+ "gpll0_out_even",
+ "core_pi_sleep_clk",
+};
+
static struct clk_alpha_pll gpll0 = {
.offset = 0x0,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
@@ -358,6 +365,28 @@ static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
},
};
+static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
+ F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
+ F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 gcc_qspi_core_clk_src = {
+ .cmd_rcgr = 0x4b008,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = gcc_parent_map_0,
+ .freq_tbl = ftbl_gcc_qspi_core_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_core_clk_src",
+ .parent_names = gcc_parent_names_9,
+ .num_parents = 4,
+ .ops = &clk_rcg2_floor_ops,
+ },
+};
+
static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
F(9600000, P_BI_TCXO, 2, 0, 0),
F(19200000, P_BI_TCXO, 1, 0, 0),
@@ -1935,6 +1964,37 @@ static struct clk_branch gcc_qmip_video_ahb_clk = {
},
};
+static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
+ .halt_reg = 0x4b000,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4b000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_cnoc_periph_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_qspi_core_clk = {
+ .halt_reg = 0x4b004,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x4b004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_qspi_core_clk",
+ .parent_names = (const char *[]){
+ "gcc_qspi_core_clk_src",
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
.halt_reg = 0x17030,
.halt_check = BRANCH_HALT_VOTED,
@@ -3383,6 +3443,9 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
[GPLL4] = &gpll4.clkr,
[GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
[GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
+ [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
+ [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
+ [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
};
static const struct qcom_reset_map gcc_sdm845_resets[] = {
--
2.18.0.233.g985f88cf7e-goog
next prev parent reply other threads:[~2018-07-23 21:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 21:54 [PATCH v2 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845 Douglas Anderson
2018-07-23 21:54 ` Douglas Anderson
2018-07-23 21:54 ` [PATCH v2 1/2] clk: qcom: Add qspi (Quad SPI) clock defines for sdm845 to header Douglas Anderson
2018-07-23 21:54 ` Douglas Anderson [this message]
2018-07-24 2:22 ` [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845 Taniya Das
2018-07-24 3:30 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180723215404.74296-3-dianders@chromium.org \
--to=dianders@chromium.org \
--cc=andy.gross@linaro.org \
--cc=anischal@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=girishm@codeaurora.org \
--cc=grahamr@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.