From: "Angus Ainslie (Purism)" <angus@akkea.ca>
To: Krzysztof Kozlowski <krzk@kernel.org>
Cc: angus.ainslie@puri.sm, Sebastian Reichel <sre@kernel.org>,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
"Angus Ainslie (Purism)" <angus@akkea.ca>
Subject: [PATCH v4 3/4] power: bq25890_charger.c: Add the BQ25896 part
Date: Tue, 31 Jul 2018 11:49:08 -0600 [thread overview]
Message-ID: <20180731174909.9392-4-angus@akkea.ca> (raw)
In-Reply-To: <20180731174909.9392-1-angus@akkea.ca>
The BQ25896 is almost identical to the BQ25890.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
---
.../bindings/power/supply/bq25890.txt | 3 +++
drivers/power/supply/bq25890_charger.c | 24 +++++++++++++++----
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/power/supply/bq25890.txt b/Documentation/devicetree/bindings/power/supply/bq25890.txt
index c9dd17d142ad..dc0568933359 100644
--- a/Documentation/devicetree/bindings/power/supply/bq25890.txt
+++ b/Documentation/devicetree/bindings/power/supply/bq25890.txt
@@ -1,5 +1,8 @@
Binding for TI bq25890 Li-Ion Charger
+This driver will support the bq25896 and the bq25890. There are other ICs
+in the same family but those have not been tested.
+
Required properties:
- compatible: Should contain one of the following:
* "ti,bq25890"
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
index ca61278e932e..23b39da07e56 100644
--- a/drivers/power/supply/bq25890_charger.c
+++ b/drivers/power/supply/bq25890_charger.c
@@ -32,6 +32,7 @@
#define BQ25890_IRQ_PIN "bq25890_irq"
#define BQ25890_ID 3
+#define BQ25896_ID 0
enum bq25890_fields {
F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */
@@ -153,8 +154,8 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_CONV_RATE] = REG_FIELD(0x02, 6, 6),
[F_BOOSTF] = REG_FIELD(0x02, 5, 5),
[F_ICO_EN] = REG_FIELD(0x02, 4, 4),
- [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3),
- [F_MAXC_EN] = REG_FIELD(0x02, 2, 2),
+ [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), // reserved on BQ25896
+ [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), // reserved on BQ25896
[F_FORCE_DPM] = REG_FIELD(0x02, 1, 1),
[F_AUTO_DPDM_EN] = REG_FIELD(0x02, 0, 0),
/* REG03 */
@@ -163,6 +164,7 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_OTG_CFG] = REG_FIELD(0x03, 5, 5),
[F_CHG_CFG] = REG_FIELD(0x03, 4, 4),
[F_SYSVMIN] = REG_FIELD(0x03, 1, 3),
+ /* MIN_VBAT_SEL on BQ25896 */
/* REG04 */
[F_PUMPX_EN] = REG_FIELD(0x04, 7, 7),
[F_ICHG] = REG_FIELD(0x04, 0, 6),
@@ -181,7 +183,7 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_CHG_TMR] = REG_FIELD(0x07, 1, 2),
[F_JEITA_ISET] = REG_FIELD(0x07, 0, 0),
/* REG08 */
- [F_BATCMP] = REG_FIELD(0x08, 6, 7),
+ [F_BATCMP] = REG_FIELD(0x08, 6, 7), // 5-7 on BQ25896
[F_VCLAMP] = REG_FIELD(0x08, 2, 4),
[F_TREG] = REG_FIELD(0x08, 0, 1),
/* REG09 */
@@ -195,12 +197,13 @@ static const struct reg_field bq25890_reg_fields[] = {
[F_PUMPX_DN] = REG_FIELD(0x09, 0, 0),
/* REG0A */
[F_BOOSTV] = REG_FIELD(0x0A, 4, 7),
+ /* PFM_OTG_DIS 3 on BQ25896 */
[F_BOOSTI] = REG_FIELD(0x0A, 0, 2),
/* REG0B */
[F_VBUS_STAT] = REG_FIELD(0x0B, 5, 7),
[F_CHG_STAT] = REG_FIELD(0x0B, 3, 4),
[F_PG_STAT] = REG_FIELD(0x0B, 2, 2),
- [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1),
+ [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
[F_VSYS_STAT] = REG_FIELD(0x0B, 0, 0),
/* REG0C */
[F_WD_FAULT] = REG_FIELD(0x0C, 7, 7),
@@ -396,6 +399,16 @@ static int bq25890_power_supply_get_property(struct power_supply *psy,
val->strval = BQ25890_MANUFACTURER;
break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ if (bq->chip_id == BQ25890_ID)
+ val->strval = "BQ25890";
+ else if (bq->chip_id == BQ25896_ID)
+ val->strval = "BQ25896";
+ else
+ val->strval = "UNKNOWN";
+
+ break;
+
case POWER_SUPPLY_PROP_ONLINE:
val->intval = state.online;
break;
@@ -647,6 +660,7 @@ static int bq25890_hw_init(struct bq25890_device *bq)
static enum power_supply_property bq25890_power_supply_props[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_HEALTH,
@@ -848,7 +862,7 @@ static int bq25890_probe(struct i2c_client *client,
return bq->chip_id;
}
- if (bq->chip_id != BQ25890_ID) {
+ if ((bq->chip_id != BQ25890_ID) && (bq->chip_id != BQ25896_ID)) {
dev_err(dev, "Chip with ID=%d, not supported!\n", bq->chip_id);
return -ENODEV;
}
--
2.17.1
next prev parent reply other threads:[~2018-07-31 17:49 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 13:51 [PATCH] bq25890_charger.c : add the BQ25896 part Angus Ainslie
2018-07-25 9:58 ` Krzysztof Kozlowski
2018-07-25 12:17 ` Angus Ainslie
2018-07-26 6:37 ` Krzysztof Kozlowski
2018-07-25 19:46 ` [PATCH v2 0/4] Add the BQ25896 charger IC Angus Ainslie (Purism)
2018-07-25 19:46 ` [PATCH v2 1/4] power: bq25890_charger.c: Add debugging output of failed initialization Angus Ainslie (Purism)
2018-07-26 6:44 ` Krzysztof Kozlowski
2018-07-25 19:46 ` [PATCH v2 2/4] power: bq25890_charger.c: Remove unused table Angus Ainslie (Purism)
2018-07-26 6:51 ` Krzysztof Kozlowski
2018-07-27 15:26 ` Angus Ainslie
2018-07-31 6:40 ` Krzysztof Kozlowski
2018-07-25 19:46 ` [PATCH v2 3/4] power: bq25890_charger.c: Add the BQ25896 part Angus Ainslie (Purism)
2018-07-26 6:56 ` Krzysztof Kozlowski
2018-07-25 19:46 ` [PATCH v2 4/4] power: bq25890_charger.c: Read back the current battery voltage Angus Ainslie (Purism)
2018-07-26 7:03 ` Krzysztof Kozlowski
2018-07-27 15:30 ` Angus Ainslie
2018-07-31 16:43 ` [PATCH v3 0/4] Add the BQ25896 charger IC Angus Ainslie (Purism)
2018-07-31 16:43 ` [PATCH v3 1/4] power: bq25890_charger.c: Add debugging output of failed initialization Angus Ainslie (Purism)
2018-07-31 16:57 ` Krzysztof Kozlowski
2018-07-31 18:16 ` Angus Ainslie
2018-07-31 16:43 ` [PATCH v3 2/4] power: bq25890_charger.c: Remove unused table entries Angus Ainslie (Purism)
2018-07-31 16:58 ` Krzysztof Kozlowski
2018-07-31 16:43 ` [PATCH v3 3/4] power: bq25890_charger.c: Add the BQ25896 part Angus Ainslie (Purism)
2018-07-31 17:00 ` Krzysztof Kozlowski
2018-07-31 16:43 ` [PATCH v3 4/4] power: bq25890_charger.c: Read back the current battery voltage Angus Ainslie (Purism)
2018-07-31 17:02 ` Krzysztof Kozlowski
2018-07-31 17:49 ` [PATCH v4 0/4] Add the BQ25896 charger IC Angus Ainslie (Purism)
2018-07-31 17:49 ` [PATCH v4 1/4] power: bq25890_charger.c: Add debugging output of failed initialization Angus Ainslie (Purism)
2018-07-31 17:49 ` [PATCH v4 2/4] power: bq25890_charger.c: Remove unused table entries Angus Ainslie (Purism)
2018-07-31 17:49 ` Angus Ainslie (Purism) [this message]
2018-07-31 17:49 ` [PATCH v4 4/4] power: bq25890_charger.c: Read back the current battery voltage Angus Ainslie (Purism)
2018-08-30 21:46 ` [PATCH v4 0/4] Add the BQ25896 charger IC Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180731174909.9392-4-angus@akkea.ca \
--to=angus@akkea.ca \
--cc=angus.ainslie@puri.sm \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=sre@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.