diff for duplicates of <20180731184556.169290-4-mka@chromium.org> diff --git a/a/1.txt b/N1/1.txt index e54864b..5366d66 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -14,7 +14,7 @@ Changes in v4: - none Changes in v3: -- changed node name from 'qcom,temp-alarm@2400' to 'temp-alarm@2400' +- changed node name from 'qcom,temp-alarm at 2400' to 'temp-alarm at 2400' - removed controller register length value from 'reg' Changes in v2: @@ -31,14 +31,14 @@ index 92bed1e7d4bb..7eea94701b23 100644 #address-cells = <1>; #size-cells = <0>; -+ pm8998_temp: temp-alarm@2400 { ++ pm8998_temp: temp-alarm at 2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; + }; + - pm8998_gpio: gpios@c000 { + pm8998_gpio: gpios at c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; -- diff --git a/a/content_digest b/N1/content_digest index 795918d..e8e4b1c 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,25 +1,8 @@ "ref\020180731184556.169290-1-mka@chromium.org\0" - "From\0Matthias Kaehlcke <mka@chromium.org>\0" + "From\0mka@chromium.org (Matthias Kaehlcke)\0" "Subject\0[PATCH v6 4/5] arm64: dts: qcom: pm8998: Add spmi-temp-alarm node\0" "Date\0Tue, 31 Jul 2018 11:45:55 -0700\0" - "To\0Andy Gross <andy.gross@linaro.org>" - David Brown <david.brown@linaro.org> - Rob Herring <robh+dt@kernel.org> - Mark Rutland <mark.rutland@arm.com> - Catalin Marinas <catalin.marinas@arm.com> - Will Deacon <will.deacon@arm.com> - Zhang Rui <rui.zhang@intel.com> - " Eduardo Valentin <edubezval@gmail.com>\0" - "Cc\0linux-soc@vger.kernel.org" - linux-arm-msm@vger.kernel.org - linux-arm-kernel@lists.infradead.org - linux-kernel@vger.kernel.org - devicetree@vger.kernel.org - linux-pm@vger.kernel.org - David Collins <collinsd@codeaurora.org> - Douglas Anderson <dianders@chromium.org> - Stephen Boyd <sboyd@kernel.org> - " Matthias Kaehlcke <mka@chromium.org>\0" + "To\0linux-arm-kernel@lists.infradead.org\0" "\00:1\0" "b\0" "This adds the spmi-temp-alarm node to pm8998 based on the examples in the\n" @@ -38,7 +21,7 @@ "- none\n" "\n" "Changes in v3:\n" - "- changed node name from 'qcom,temp-alarm@2400' to 'temp-alarm@2400'\n" + "- changed node name from 'qcom,temp-alarm at 2400' to 'temp-alarm at 2400'\n" "- removed controller register length value from 'reg'\n" "\n" "Changes in v2:\n" @@ -55,17 +38,17 @@ " \t\t#address-cells = <1>;\n" " \t\t#size-cells = <0>;\n" " \n" - "+\t\tpm8998_temp: temp-alarm@2400 {\n" + "+\t\tpm8998_temp: temp-alarm at 2400 {\n" "+\t\t\tcompatible = \"qcom,spmi-temp-alarm\";\n" "+\t\t\treg = <0x2400>;\n" "+\t\t\tinterrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;\n" "+\t\t\t#thermal-sensor-cells = <0>;\n" "+\t\t};\n" "+\n" - " \t\tpm8998_gpio: gpios@c000 {\n" + " \t\tpm8998_gpio: gpios at c000 {\n" " \t\t\tcompatible = \"qcom,pm8998-gpio\", \"qcom,spmi-gpio\";\n" " \t\t\treg = <0xc000>;\n" "-- \n" 2.18.0.345.g5c9ce644c3-goog -120e72cdbcb9e5641f3c23d2520730148a62a41bd3e7e686bc1bf496470bad95 +11f68cdc8732e5e7727a9428dc2881b64a4957b7faa4e3b2ff623e46d8543a35
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.