From: Boris Brezillon <boris.brezillon@bootlin.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 00/27] SPI-NAND support
Date: Tue, 31 Jul 2018 21:25:53 +0200 [thread overview]
Message-ID: <20180731212553.7f26b368@bbrezillon> (raw)
In-Reply-To: <CAMty3ZDjtkwYWnGX2NLRSrDTALPN8hY-4-ggap0iB_BGwEt=Uw@mail.gmail.com>
Hi Jagan,
On Tue, 31 Jul 2018 20:03:47 +0530
Jagan Teki <jagan@amarulasolutions.com> wrote:
> > Applied to u-boot-spi/master
>
> Look like we have some build issues [1]?
Yep, I reproduced the issue. Looks like u-boot Makefile hierarchy is a
bit different from Linux one, and patch is breaking raw/parallel NAND
build. I fixed it up (see below diff). This diff should be merged in
patch 9, and you'll have to fix a few conflicts when rebasing. Here is
a branch [1] containing this fixup commit (placed just after the
offending one) in case you want to check the end result.
Regards,
Boris
[1]https://github.com/bbrezillon/u-boot/commits/wip-spi
--->8---
diff --git a/Makefile b/Makefile
index 884b7d943cf7..a38146003d77 100644
--- a/Makefile
+++ b/Makefile
@@ -685,7 +685,7 @@ libs-y += drivers/dma/
libs-y += drivers/gpio/
libs-y += drivers/i2c/
libs-y += drivers/mtd/
-libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
+libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
libs-y += drivers/mtd/onenand/
libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
libs-y += drivers/mtd/spi/
diff --git a/drivers/Makefile b/drivers/Makefile
index 276e5ee4d7ee..ccd1b648d058 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
obj-$(CONFIG_$(SPL_TPL_)LED) += led/
obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 8b2d0e118d1c..69f40d15635d 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -1,3 +1,2 @@
# SPDX-License-Identifier: GPL-2.0+
-obj-$(CONFIG_MTD_NAND) += raw/
next prev parent reply other threads:[~2018-07-31 19:25 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-30 15:46 [U-Boot] [PATCH v5 00/27] SPI-NAND support Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 01/27] mtd: Fallback to ->_read/write_oob() when ->_read/write() is missing Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 02/27] mtd: Uninline mtd_write_oob and move it to mtdcore.c Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 03/27] mtd: Add sanity checks in mtd_write/read_oob() Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 04/27] mtd: Fallback to ->_read/write() when ->_read/write_oob() is missing Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 05/27] mtd: add get/set of_node/flash_node helpers Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 06/27] mtd: fix build issue with includes Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 07/27] mtd: move definitions to enlarge their range Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 08/27] mtd: move all flash categories inside MTD submenu Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 09/27] mtd: move NAND files into a raw/ subdirectory Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 10/27] mtd: rename nand into rawnand in Kconfig prompt Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 11/27] mtd: nand: Add core infrastructure to deal with NAND devices Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 12/27] mtd: nand: Pass mode information to nand_page_io_req Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 13/27] spi: Extend the core to ease integration of SPI memory controllers Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 14/27] mtd: nand: Add core infrastructure to support SPI NANDs Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 15/27] mtd: spinand: Add initial support for Micron MT29F2G01ABAGD Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 16/27] mtd: spinand: Add initial support for Winbond W25M02GV Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 17/27] mtd: spinand: Add initial support for the MX35LF1GE4AB chip Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 18/27] mtd: spinand: Add initial support for the MX35LF2GE4AB chip Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 19/27] dt-bindings: Add bindings for SPI NAND devices Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 20/27] mtd: declare MTD_PARTITIONS symbol in Kconfig Miquel Raynal
2018-07-31 7:24 ` Jagan Teki
2018-07-30 15:46 ` [U-Boot] [PATCH v5 21/27] cmd: ubi: delete useless and misleading definitions Miquel Raynal
2018-07-31 7:25 ` Jagan Teki
2018-07-30 15:46 ` [U-Boot] [PATCH v5 22/27] cmd: mtdparts: accept spi-nand devices Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 23/27] cmd: mtdparts: add a generic 'mtdparts' parser Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 24/27] cmd: mtdparts: remove useless 'mtdparts=' prefix Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 25/27] mtd: uclass: add probe function Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 26/27] cmd: mtd: add 'mtd' command Miquel Raynal
2018-07-30 15:46 ` [U-Boot] [PATCH v5 27/27] cmd: mtdparts: try to probe the MTD devices as a fallback Miquel Raynal
2018-07-31 7:29 ` [U-Boot] [PATCH v5 00/27] SPI-NAND support Jagan Teki
2018-07-31 14:33 ` Jagan Teki
2018-07-31 19:25 ` Boris Brezillon [this message]
2018-07-31 19:48 ` Boris Brezillon
2018-08-01 6:25 ` Jagan Teki
2018-08-01 8:14 ` Miquel Raynal
-- strict thread matches above, loose matches on Subject: below --
2018-08-02 13:46 Jose Landeros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180731212553.7f26b368@bbrezillon \
--to=boris.brezillon@bootlin.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.