From: Boris Brezillon <boris.brezillon@bootlin.com>
To: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard.weinberger@gmail.com>,
Marek Vasut <marek.vasut@gmail.com>,
Brian Norris <computersforpeace@gmail.com>,
David Woodhouse <dwmw2@infradead.org>,
linux-mtd@lists.infradead.org
Subject: Re: mtd: nand: Changes for 4.19
Date: Sat, 11 Aug 2018 12:21:26 +0200 [thread overview]
Message-ID: <20180811122126.5260a82e@bbrezillon> (raw)
In-Reply-To: <20180801120429.62dfdb11@xps13>
On Wed, 1 Aug 2018 12:04:29 +0200
Miquel Raynal <miquel.raynal@bootlin.com> wrote:
> The following changes since commit 021c91791a5e7e85c567452f1be3e4c2c6cb6063:
>
> Linux 4.18-rc3 (2018-07-01 16:04:53 -0700)
>
> are available in the git repository at:
>
> git://git.infradead.org/linux-mtd.git tags/nand/for-4.19
>
> for you to fetch changes up to ed128e8b757b4e759e5585df720888b30a7f2196:
>
> MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support (2018-08-01 09:46:09 +0200)
PR merged in mtd/next.
Thanks,
Boris
>
> ----------------------------------------------------------------
> NAND core changes:
> - Add the SPI-NAND framework.
> - Create a helper to find the best ECC configuration.
> - Create NAND controller operations.
> - Allocate dynamically ONFI parameters structure.
> - Add defines for ONFI version bits.
> - Add manufacturer fixup for ONFI parameter page.
> - Add an option to specify NAND chip as a boot device.
> - Add Reed-Solomon error correction algorithm.
> - Better name for the controller structure.
> - Remove unused caller_is_module() definition.
> - Make subop helpers return unsigned values.
> - Expose _notsupp() helpers for raw page accessors.
> - Add default values for dynamic timings.
> - Kill the chip->scan_bbt() hook.
> - Rename nand_default_bbt() into nand_create_bbt().
> - Start to clean the nand_chip structure.
> - Remove stale prototype from rawnand.h.
>
> Raw NAND controllers drivers changes:
> - Qcom: structuring cleanup.
> - Denali: use core helper to find the best ECC configuration.
> - Possible build of almost all drivers by adding a dependency on
> COMPILE_TEST for almost all of them in Kconfig, implies various
> fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
> changes in sparc64 and ia64 architectures.
> - Clean the ->probe() functions error path of a lot of drivers.
> - Migrate all drivers to use nand_scan() instead of
> nand_scan_ident()/nand_scan_tail() pair.
> - Use mtd_device_register() where applicable to simplify the code.
> - Marvell:
> * Handle on-die ECC.
> * Better clocks handling.
> * Remove bogus comment.
> * Add suspend and resume support.
> - Tegra: add NAND controller driver.
> - Atmel:
> * Add module param to avoid using dma.
> * Drop Wenyou Yang from MAINTAINERS.
> - Denali: optimize timings handling.
> - FSMC: Stop using chip->read_buf().
> - FSL:
> * Switch to SPDX license tag identifiers.
> * Fix qualifiers in MXC init functions.
>
> Raw NAND chip drivers changes:
> - Micron:
> * Add fixup for ONFI revision.
> * Update ecc_stats.corrected.
> * Make ECC activation stateful.
> * Avoid enabling/disabling ECC when it can't be disabled.
> * Get the actual number of bitflips.
> * Allow forced on-die ECC.
> * Support 8/512 on-die ECC.
> * Fix on-die ECC detection logic.
> - Hynix:
> * Fix decoding the OOB size on H27UCG8T2BTR.
> * Use ->exec_op() in hynix_nand_reg_write_op().
>
> ----------------------------------------------------------------
> Abhishek Sahu (15):
> mtd: rawnand: helper function for setting up ECC configuration
> mtd: rawnand: denali: use helper function for ecc setup
> dt-bindings: qcom_nandc: update for ECC strength and step size
> mtd: rawnand: qcom: remove dt property nand-ecc-step-size
> mtd: rawnand: qcom: use the ecc strength from device parameter
> mtd: rawnand: qcom: wait for desc completion in all BAM channels
> mtd: rawnand: qcom: erased page detection for uncorrectable errors only
> mtd: rawnand: qcom: fix null pointer access for erased page detection
> mtd: rawnand: qcom: parse read errors for read oob also
> mtd: rawnand: qcom: modify write_oob to remove read codeword part
> mtd: rawnand: qcom: fix return value for raw page read
> mtd: rawnand: qcom: check for operation errors in case of raw read
> mtd: rawnand: qcom: code reorganization for raw read
> mtd: rawnand: provide only single helper function for ECC conf
> mtd: rawnand: qcom: erased page bitflips detection
>
> Anders Roxell (1):
> drivers/memory/Kconfig: Add CONFIG_OF dependency
>
> Arnd Bergmann (4):
> mtd: rawnand: MTD_NAND_BCM47XXNFLASH needs CONFIG_BCMA
> mtd: rawnand: qcom: stop using phys_to_dma()
> ia64: use asm-generic/io.h
> sparc64: add reads{b,w,l}/writes{b,w,l}
>
> Boris Brezillon (60):
> mtd: rawnand: micron: Update ecc_stats.corrected
> dt-bindings: Add bindings for SPI NAND devices
> mtd: spinand: Add initial support for the MX35LF1GE4AB chip
> mtd: rawnand: gpmi: Remove useless dependency on MTD_NAND
> mtd: rawnand: Add 'depends on HAS_IOMEM' where missing
> mtd: rawnand: omap2: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: sharpsl: Remove inclusion of mach and asm headers
> mtd: rawnand: sharpsl: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: lpc32xx: Allow selection of these drivers when COMPILE_TEST=y
> mtd: rawnand: brcmnand: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: mxc: Avoid inclusion of asm/mach headers
> mtd: rawnand: mxc: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: qcom: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: nuc900: Allow selection of this driver when COMPILE_TEST=y
> bcma: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: Kill cafe_nand_bug()
> mtd: rawnand: Remove nand_do_read() prototype from rawnand.h
> mtd: rawnand: Remove forward declaration of mtd_info
> mtd: rawnand: Remove forward declaration of device_node
> mtd: rawnand: Rename nand_default_bbt() into nand_create_bbt()
> mtd: rawnand: Kill the chip->scan_bbt() hook
> mtd: rawnand: orion_nand: Kill orion_nand_data.dev_ready()
> mtd: rawnand: plat_nand: Kill pdata->ctrl.{hwcontrol, read_byte}()
> mtd: rawnand: hynix: Use ->exec_op() in hynix_nand_reg_write_op()
> mtd: rawnand: atmel: Use uintptr_t casts instead of unsigned int
> mtd: rawnand: atmel: Add an __iomem cast on gen_pool_dma_alloc() call
> mtd: rawnand: atmel: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: davinci: Stop doing iomem pointer <-> u32 conversions
> mtd: rawnand: davinci: Use uintptr_t casts instead of unsigned ones
> mtd: rawnand: davinci: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: sunxi: Add an U suffix to NFC_PAGE_OP definition
> mtd: rawnand: sunxi: Make sure ret is initialized in sunxi_nfc_read_byte()
> mtd: rawnand: sunxi: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: fscm: Avoid collision on PC def when compiling for MIPS
> mtd: rawnand: fsmc: Use uintptr_t casts instead of unsigned ones
> mtd: rawnand: fsmc: Allow selection of this driver when COMPILE_TEST=y
> memory: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: fsl_ifc: Add an __iomem specifier on eccstat_regs
> mtd: rawnand: fsl_ifc: Allow selection of this driver when COMPILE_TEST=y
> MIPS: txx9: Move the ndfc.h header to include/linux/platform_data/txx9
> mtd: rawnand: txx9ndfmc: Allow selection of this driver when COMPILE_TEST=y
> MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740
> mtd: rawnand: jz4740: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: jz4780: Drop the dependency on MACH_JZ4780
> mtd: rawnand: jz4740: Use the proper format specifier to print chipnr
> memory: jz4780-nemc: Allow selection of this driver when COMPILE_TEST=y
> mtd: rawnand: fsmc: Stop using chip->read_buf()
> mtd: rawnand: micron: Fix on-die ECC detection logic
> mtd: rawnand: Expose _notsupp() helpers for raw page accessors
> mtd: rawnand: micron: Get the actual number of bitflips
> mtd: rawnand: micron: Avoid enabling/disabling ECC when it can't be disabled
> mtd: rawnand: micron: Make ECC activation stateful
> mtd: rawnand: orion: Avoid direct inclusion of asm headers
> mtd: rawnand: orion: Handle cases where __LINUX_ARM_ARCH__ is not defined
> mtd: rawnand: s3c2410: Error out when ->nrsets < 0 or ->sets == NULL
> mtd: rawnand: Remove unused caller_is_module() definition
> mtd: rawnand: jz4740: Include gpio/consumer.h instead of gpio.h
> mtd: rawnand: sunxi: Remove gpio.h and of_gpio.h inclusions
> mtd: rawnand: atmel: Stop including gpio.h
> mtd: rawnand: au1550nd: Remove unneeded gpio.h inclusion
>
> Chris Packham (6):
> mtd: rawnand: marvell: Handle on-die ECC
> mtd: rawnand: add manufacturer fixup for ONFI parameter page
> mtd: rawnand: add defines for ONFI version bits
> mtd: rawnand: micron: add fixup for ONFI revision
> mtd: rawnand: micron: support 8/512 on-die ECC
> mtd: rawnand: micron: allow forced on-die ECC
>
> Colin Ian King (1):
> mtd: rawnand: gpmi: remove redundant variable payload_virt
>
> Daniel Mack (3):
> mtd: rawnand: marvell: add suspend and resume hooks
> mtd: rawnand: marvell: remove bogus comment in marvell_nfc_select_chip()
> mtd: rawnand: marvell: set reg_clk to NULL if it can't be obtained
>
> Fabio Estevam (2):
> mtd: rawnand: gpmi: Switch to SPDX identifier
> mtd: rawnand: mxc: Switch to SPDX identifier
>
> Frieder Schrempf (1):
> mtd: spinand: Add initial support for Winbond W25M02GV
>
> Martin Blumenstingl (1):
> mtd: rawnand: hynix: fix decoding the OOB size on H27UCG8T2BTR
>
> Martin Kaiser (1):
> mtd: rawnand: mxc: remove __init qualifier from mxcnd_probe_dt
>
> Masahiro Yamada (4):
> mtd: rawnand: denali_dt: use dev as a shorthand of &pdev->dev
> dt-binding: mtd: denali_dt: document clock property
> mtd: rawnand: denali_dt: add more clocks based on IP datasheet
> mtd: rawnand: denali: optimize timing parameters for data interface
>
> Miquel Raynal (48):
> mtd: spinand: macronix: Add support for MX35LF2GE4AB
> mtd: rawnand: docg4: fix the probe function error path
> mtd: rawnand: fix indentation in Kconfig
> mtd: rawnand: add default values for dynamic timings
> mtd: rawnand: make subop helpers return unsigned values
> mtd: rawnand: better name for the controller structure
> mtd: rawnand: add hooks that may be called during nand_scan()
> mtd: rawnand: davinci: convert driver to nand_scan()
> mtd: rawnand: denali: convert to nand_scan()
> mtd: rawnand: fsl_elbc: return meaningful values
> mtd: rawnand: fsl_elbc: convert driver to nand_scan()
> mtd: rawnand: fsl_ifc: convert driver to nand_scan()
> mtd: rawnand: fsmc: convert driver to nand_scan()
> mtd: rawnand: gpmi: convert driver to nand_scan()
> mtd: rawnand: hisi504: convert driver to nand_scan()
> mtd: rawnand: jz4780: convert driver to nand_scan()
> mtd: rawnand: lpc32xx_slc: convert driver to nand_scan()
> mtd: rawnand: marvell: convert driver to nand_scan()
> mtd: rawnand: mtk: convert driver to nand_scan()
> mtd: rawnand: mxc: convert driver to nand_scan()
> mtd: rawnand: nandsim: convert driver to nand_scan()
> mtd: rawnand: s3c2410: convert driver to nand_scan()
> mtd: rawnand: sh_flctl: convert driver to nand_scan()
> mtd: rawnand: sunxi: convert driver to nand_scan()
> mtd: rawnand: tango: convert driver to nand_scan()
> mtd: rawnand: txx9ndfmc: rename nand controller internal structure
> mtd: rawnand: vf610: convert driver to nand_scan()
> mtd: rawnand: sm_common: fix the probe function error path
> mtd: rawnand: sm_common: convert driver to nand_scan_with_ids()
> mtd: rawnand: qcom: convert driver to nand_scan()
> mtd: rawnand: brcmnand: convert driver to nand_scan()
> mtd: rawnand: cafe: convert driver to nand_scan()
> mtd: rawnand: lpc32xx_mlc: convert driver to nand_scan()
> mtd: rawnand: omap2: convert driver to nand_scan()
> mtd: rawnand: atmel: clarify NAND addition/removal paths
> mtd: rawnand: atmel: convert driver to nand_scan()
> mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
> mtd: rawnand: docg4: convert driver to nand_scan()
> mtd: rawnand: jz4740: fix probe function error path
> mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
> mtd: rawnand: jz4740: convert driver to nand_scan()
> mtd: rawnand: tegra: convert driver to nand_scan()
> mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
> mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
> mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
> mtd: rawnand: allocate model parameter dynamically
> mtd: rawnand: allocate dynamically ONFI parameters during detection
> MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support
>
> Peter Pan (2):
> mtd: nand: Add core infrastructure to support SPI NANDs
> mtd: spinand: Add initial support for Micron MT29F2G01ABAGD
>
> Peter Rosin (1):
> mtd: rawnand: atmel: add module param to avoid using dma
>
> Rafał Miłecki (2):
> mtd: rawnand: use mtd_device_register() where applicable
> mtd: onenand: use mtd_device_register() where applicable
>
> Stefan Agner (5):
> mtd: rawnand: add Reed-Solomon error correction algorithm
> mtd: rawnand: add an option to specify NAND chip as a boot device
> dt-bindings: mtd: add tegra NAND controller binding
> mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver
> mtd: rawnand: tegra: check bounds of die_nr properly
>
> .../devicetree/bindings/mtd/denali-nand.txt | 5 +
> Documentation/devicetree/bindings/mtd/nand.txt | 6 +-
> .../bindings/mtd/nvidia-tegra20-nand.txt | 64 +
> .../devicetree/bindings/mtd/qcom_nandc.txt | 7 +-
> Documentation/devicetree/bindings/mtd/spi-nand.txt | 5 +
> MAINTAINERS | 8 +-
> arch/arm/mach-pxa/balloon3.c | 1 -
> arch/arm/mach-pxa/em-x270.c | 1 -
> arch/ia64/include/asm/io.h | 13 +-
> arch/mips/jz4740/board-qi_lb60.c | 3 +-
> arch/mips/txx9/generic/setup.c | 2 +-
> arch/mips/txx9/generic/setup_tx4938.c | 2 +-
> arch/mips/txx9/generic/setup_tx4939.c | 2 +-
> arch/sparc/include/asm/io_64.h | 19 +-
> drivers/bcma/Kconfig | 3 +-
> drivers/memory/Kconfig | 6 +-
> drivers/mtd/nand/Kconfig | 1 +
> drivers/mtd/nand/Makefile | 1 +
> drivers/mtd/nand/onenand/generic.c | 5 +-
> drivers/mtd/nand/onenand/samsung.c | 5 +-
> drivers/mtd/nand/raw/Kconfig | 152 ++-
> drivers/mtd/nand/raw/Makefile | 1 +
> drivers/mtd/nand/raw/atmel/nand-controller.c | 175 ++-
> drivers/mtd/nand/raw/au1550nd.c | 1 -
> drivers/mtd/nand/raw/brcmnand/brcmnand.c | 67 +-
> drivers/mtd/nand/raw/cafe_nand.c | 143 ++-
> drivers/mtd/nand/raw/cmx270_nand.c | 4 +-
> drivers/mtd/nand/raw/cs553x_nand.c | 3 +-
> drivers/mtd/nand/raw/davinci_nand.c | 231 ++--
> drivers/mtd/nand/raw/denali.c | 216 ++--
> drivers/mtd/nand/raw/denali.h | 1 +
> drivers/mtd/nand/raw/denali_dt.c | 72 +-
> drivers/mtd/nand/raw/denali_pci.c | 1 +
> drivers/mtd/nand/raw/diskonchip.c | 4 +-
> drivers/mtd/nand/raw/docg4.c | 89 +-
> drivers/mtd/nand/raw/fsl_elbc_nand.c | 25 +-
> drivers/mtd/nand/raw/fsl_ifc_nand.c | 25 +-
> drivers/mtd/nand/raw/fsmc_nand.c | 183 +--
> drivers/mtd/nand/raw/gpmi-nand/gpmi-lib.c | 15 +-
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 76 +-
> drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.h | 11 +-
> drivers/mtd/nand/raw/hisi504_nand.c | 78 +-
> drivers/mtd/nand/raw/jz4740_nand.c | 51 +-
> drivers/mtd/nand/raw/jz4780_nand.c | 41 +-
> drivers/mtd/nand/raw/lpc32xx_mlc.c | 61 +-
> drivers/mtd/nand/raw/lpc32xx_slc.c | 77 +-
> drivers/mtd/nand/raw/marvell_nand.c | 302 +++--
> drivers/mtd/nand/raw/mtk_nand.c | 79 +-
> drivers/mtd/nand/raw/mxc_nand.c | 157 ++-
> drivers/mtd/nand/raw/nand_base.c | 343 ++++--
> drivers/mtd/nand/raw/nand_bbt.c | 10 +-
> drivers/mtd/nand/raw/nand_hynix.c | 23 +
> drivers/mtd/nand/raw/nand_micron.c | 351 +++++-
> drivers/mtd/nand/raw/nand_timings.c | 32 +-
> drivers/mtd/nand/raw/nandsim.c | 84 +-
> drivers/mtd/nand/raw/ndfc.c | 4 +-
> drivers/mtd/nand/raw/omap2.c | 533 +++++----
> drivers/mtd/nand/raw/orion_nand.c | 9 +-
> drivers/mtd/nand/raw/oxnas_nand.c | 4 +-
> drivers/mtd/nand/raw/plat_nand.c | 2 -
> drivers/mtd/nand/raw/qcom_nandc.c | 595 ++++++----
> drivers/mtd/nand/raw/s3c2410.c | 52 +-
> drivers/mtd/nand/raw/sh_flctl.c | 36 +-
> drivers/mtd/nand/raw/sharpsl.c | 5 +-
> drivers/mtd/nand/raw/sm_common.c | 39 +-
> drivers/mtd/nand/raw/sunxi_nand.c | 55 +-
> drivers/mtd/nand/raw/tango_nand.c | 44 +-
> drivers/mtd/nand/raw/tegra_nand.c | 1246 ++++++++++++++++++++
> drivers/mtd/nand/raw/txx9ndfmc.c | 42 +-
> drivers/mtd/nand/raw/vf610_nfc.c | 127 +-
> drivers/mtd/nand/spi/Kconfig | 7 +
> drivers/mtd/nand/spi/Makefile | 3 +
> drivers/mtd/nand/spi/core.c | 1155 ++++++++++++++++++
> drivers/mtd/nand/spi/macronix.c | 144 +++
> drivers/mtd/nand/spi/micron.c | 133 +++
> drivers/mtd/nand/spi/winbond.c | 141 +++
> include/linux/mtd/rawnand.h | 126 +-
> include/linux/mtd/spinand.h | 421 +++++++
> .../linux/platform_data/jz4740}/jz4740_nand.h | 4 +-
> include/linux/platform_data/mtd-orion_nand.h | 1 -
> .../linux/platform_data}/txx9/ndfmc.h | 6 +-
> include/linux/spi/spi-mem.h | 4 +-
> 82 files changed, 6200 insertions(+), 2081 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt
> create mode 100644 Documentation/devicetree/bindings/mtd/spi-nand.txt
> create mode 100644 drivers/mtd/nand/raw/tegra_nand.c
> create mode 100644 drivers/mtd/nand/spi/Kconfig
> create mode 100644 drivers/mtd/nand/spi/Makefile
> create mode 100644 drivers/mtd/nand/spi/core.c
> create mode 100644 drivers/mtd/nand/spi/macronix.c
> create mode 100644 drivers/mtd/nand/spi/micron.c
> create mode 100644 drivers/mtd/nand/spi/winbond.c
> create mode 100644 include/linux/mtd/spinand.h
> rename {arch/mips/include/asm/mach-jz4740 => include/linux/platform_data/jz4740}/jz4740_nand.h (91%)
> rename {arch/mips/include/asm => include/linux/platform_data}/txx9/ndfmc.h (91%)
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
prev parent reply other threads:[~2018-08-11 10:21 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-01 10:04 mtd: nand: Changes for 4.19 Miquel Raynal
2018-08-11 10:21 ` Boris Brezillon [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180811122126.5260a82e@bbrezillon \
--to=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=dwmw2@infradead.org \
--cc=linux-mtd@lists.infradead.org \
--cc=marek.vasut@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=richard.weinberger@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.