From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alan Beard Date: Wed, 15 Aug 2018 07:52:42 +1000 Subject: [U-Boot] [PATCH v2 2/2] board: sunxi: sun8i-v40: Add Bananapi M2 Berry support In-Reply-To: <20180502091630.u72uwivgm2muvdlc@flea> References: <20180427120342.32341-1-jagan@amarulasolutions.com> <20180427120342.32341-2-jagan@amarulasolutions.com> <20180502091630.u72uwivgm2muvdlc@flea> Message-ID: <20180814213413.M45643@unixservice.com.au> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Maxine and team, I want to run Fedora linux, from here: https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Spins/armhfp /images/ on the Banana Pi BPI-M2 Berry. (works fine on a Banana Pi original) I've waited six months for the patches to filter through to the Fedora team but, so far nothing. I've downloaded the code from the denx.de website but I cannot see a way to just generate the u-boot-sunxi-with-spl.bin file for the Berry. There is a u-boot-sunxi-with-spl.bin file in the Fedora distribution for the Berry but it doesn't work. This also doesn't work: https://github.com/BPI-SINOVOIP/BPI-Mainline-uboot.git I suspect they check the chip-id and barf if it's not 0x1701 the R40. I chose the Banana Pi BPI-M2 Berry over the Ultra because I didn't need the extra ram or other bells and whistles. I want to embed a BPi Berry in an amateur radio project where I need a board with a SATA port for an SSD. Keep up the good work. Alan On Wed, 2 May 2018 11:16:30 +0200, Maxime Ripard wrote > On Fri, Apr 27, 2018 at 05:33:42PM +0530, Jagan Teki wrote: > > Banana Pi BPI-M2 Berry is a quad-core mini single board computer > > built with Allwinner V40 SoC. It features > > - Quad Core ARM Cortex A7 CPU V40 > > - 1GB of RAM . > > - microSD/SATA port.. > > - onboard WiFi and BT > > - 4 USB A 2.0 ports > > - 1 USB OTG port > > - 1 HDMI port > > - 1 audio jack > > - DC power port > > > > Signed-off-by: Jagan Teki > > There's a typo in your commit title, it should be v40 and not > v4. Otherwise it looks good, > Acked-by: Maxime Ripard > > for both patches, thanks! > Maxime > > -- > Maxime Ripard, Bootlin (formerly Free Electrons) > Embedded Linux and Kernel engineering > https://bootlin.com Alan Evil flourishes when good men do nothing. Consider the Christmas child. --------------------------------------------------------------------------- Alan Beard Unix Support Technician from 1984 to today 70 Wedmore Rd. Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS Emu Heights N.S.W. 2750 Routers, terminal servers, printers, terminals etc.. +61 2 47353013 (h) Support Programming, shell scripting, "C", assembler 0414 353013 (mobile) After uni, electronics tech