From: "Nguyễn Thái Ngọc Duy" <pclouds@gmail.com>
To: pclouds@gmail.com
Cc: Ben.Peart@microsoft.com, git@vger.kernel.org, gitster@pobox.com,
newren@gmail.com, peartben@gmail.com, peff@peff.net
Subject: [PATCH v5 0/7] Speed up unpack_trees()
Date: Sat, 18 Aug 2018 16:41:21 +0200 [thread overview]
Message-ID: <20180818144128.19361-1-pclouds@gmail.com> (raw)
In-Reply-To: <20180812081551.27927-1-pclouds@gmail.com>
v5 fixes some minor comments from round 4 and a big mistake in 5/5.
Junio's scary feeling turns out true. There is a missing invalidation
in keep_entry() which is not added in 6/7. 7/7 makes sure that similar
problems will not slip through.
I had to rebase this series on top of 'master' because 7/7 caught a
bad cache-tree situation that has been fixed by Elijah in ad3762042a
(read-cache: fix directory/file conflict handling in
read_index_unmerged() - 2018-07-31). I believe the issue was we prime
cache-tree in 'git reset --hard' even though the index has conflicts.
Range-diff (before the rebase):
1: a192faf79e ! 1: ed8763726b trace.h: support nested performance tracing
@@ -49,13 +49,16 @@
struct untracked_cache_dir *untracked;
- uint64_t start = getnanotime();
- if (has_symlink_leading_path(path, len))
+- if (has_symlink_leading_path(path, len))
++ trace_performance_enter();
++
++ if (has_symlink_leading_path(path, len)) {
++ trace_performance_leave("read directory %.*s", len, path);
return dir->nr;
++ }
-+ trace_performance_enter();
untracked = validate_untracked_cache(dir, len, pathspec);
if (!untracked)
- /*
@@
dir->nr = i;
}
2: 9afe7c488a = 2: 9b70652fa2 unpack-trees: add performance tracing
3: 74101edb60 ! 3: 8b3cfea623 unpack-trees: optimize walking same trees with cache-tree
@@ -141,7 +141,7 @@
+
+ /*
+ * Do what unpack_callback() and unpack_nondirectories() normally
-+ * do. But we walk all paths recursively in just one loop instead.
++ * do. But we walk all paths in an iterative loop instead.
+ *
+ * D/F conflicts and higher stage entries are not a concern
+ * because cache-tree would be invalidated and we would never
4: 9261c5920e = 4: 5af28d44ca unpack-trees: reduce malloc in cache-tree walk
5: 43fac1154f = 5: 5657c92fe9 unpack-trees: reuse (still valid) cache-tree from src_index
-: ---------- > 6: 3b91783afc unpack-trees: add missing cache invalidation
-: ---------- > 7: 0d5464c0dc cache-tree: verify valid cache-tree in the test suite
Nguyễn Thái Ngọc Duy (7):
trace.h: support nested performance tracing
unpack-trees: add performance tracing
unpack-trees: optimize walking same trees with cache-tree
unpack-trees: reduce malloc in cache-tree walk
unpack-trees: reuse (still valid) cache-tree from src_index
unpack-trees: add missing cache invalidation
cache-tree: verify valid cache-tree in the test suite
cache-tree.c | 80 +++++++++++++++++++++++++
cache-tree.h | 1 +
diff-lib.c | 4 +-
dir.c | 9 ++-
name-hash.c | 4 +-
preload-index.c | 4 +-
read-cache.c | 16 +++--
t/test-lib.sh | 6 ++
trace.c | 69 ++++++++++++++++++++--
trace.h | 15 +++++
unpack-trees.c | 154 +++++++++++++++++++++++++++++++++++++++++++++++-
11 files changed, 340 insertions(+), 22 deletions(-)
--
2.18.0.1004.g6639190530
next prev parent reply other threads:[~2018-08-18 14:41 UTC|newest]
Thread overview: 121+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-18 20:45 [PATCH v1 0/3] [RFC] Speeding up checkout (and merge, rebase, etc) Ben Peart
2018-07-18 20:45 ` [PATCH v1 1/3] add unbounded Multi-Producer-Multi-Consumer queue Ben Peart
2018-07-18 20:57 ` Stefan Beller
2018-07-19 19:11 ` Junio C Hamano
2018-07-18 20:45 ` [PATCH v1 2/3] add performance tracing around traverse_trees() in unpack_trees() Ben Peart
2018-07-18 20:45 ` [PATCH v1 3/3] Add initial parallel version of unpack_trees() Ben Peart
2018-07-18 22:56 ` Junio C Hamano
2018-07-18 21:02 ` [PATCH v1 0/3] [RFC] Speeding up checkout (and merge, rebase, etc) Stefan Beller
2018-07-18 21:34 ` Jeff King
2018-07-23 15:48 ` Ben Peart
2018-07-23 17:03 ` Duy Nguyen
2018-07-23 20:51 ` Ben Peart
2018-07-24 4:20 ` Jeff King
2018-07-24 15:33 ` Duy Nguyen
2018-07-25 20:56 ` Ben Peart
2018-07-26 5:30 ` Duy Nguyen
2018-07-26 16:30 ` Duy Nguyen
2018-07-26 19:40 ` Junio C Hamano
2018-07-27 15:42 ` Duy Nguyen
2018-07-27 16:22 ` Ben Peart
2018-07-27 18:00 ` Duy Nguyen
2018-07-27 17:14 ` Junio C Hamano
2018-07-27 17:52 ` Duy Nguyen
2018-07-29 6:24 ` Duy Nguyen
2018-07-29 10:33 ` [PATCH v2 0/4] Speed up unpack_trees() Nguyễn Thái Ngọc Duy
2018-07-29 10:33 ` [PATCH v2 1/4] unpack-trees.c: add performance tracing Nguyễn Thái Ngọc Duy
2018-07-30 20:16 ` Ben Peart
2018-07-29 10:33 ` [PATCH v2 2/4] unpack-trees: optimize walking same trees with cache-tree Nguyễn Thái Ngọc Duy
2018-07-30 20:52 ` Ben Peart
2018-07-29 10:33 ` [PATCH v2 3/4] unpack-trees: reduce malloc in cache-tree walk Nguyễn Thái Ngọc Duy
2018-07-30 20:58 ` Ben Peart
2018-07-29 10:33 ` [PATCH v2 4/4] unpack-trees: cheaper index update when walking by cache-tree Nguyễn Thái Ngọc Duy
2018-08-08 18:46 ` Elijah Newren
2018-08-10 16:39 ` Duy Nguyen
2018-08-10 18:39 ` Elijah Newren
2018-08-10 19:30 ` Duy Nguyen
2018-08-10 19:40 ` Elijah Newren
2018-08-10 19:48 ` Duy Nguyen
2018-07-30 18:10 ` [PATCH v2 0/4] Speed up unpack_trees() Ben Peart
2018-07-31 15:31 ` Duy Nguyen
2018-07-31 16:50 ` Ben Peart
2018-07-31 17:31 ` Ben Peart
2018-08-01 16:38 ` Duy Nguyen
2018-08-08 20:53 ` Ben Peart
2018-08-09 8:16 ` Ben Peart
2018-08-10 16:08 ` Duy Nguyen
2018-08-10 15:51 ` Duy Nguyen
2018-07-30 21:04 ` Ben Peart
2018-08-04 5:37 ` [PATCH v3 " Nguyễn Thái Ngọc Duy
2018-08-04 5:37 ` [PATCH v3 1/4] unpack-trees: add performance tracing Nguyễn Thái Ngọc Duy
2018-08-04 5:37 ` [PATCH v3 2/4] unpack-trees: optimize walking same trees with cache-tree Nguyễn Thái Ngọc Duy
2018-08-08 18:23 ` Elijah Newren
2018-08-10 16:29 ` Duy Nguyen
2018-08-10 18:48 ` Elijah Newren
2018-08-04 5:37 ` [PATCH v3 3/4] unpack-trees: reduce malloc in cache-tree walk Nguyễn Thái Ngọc Duy
2018-08-08 18:30 ` Elijah Newren
2018-08-04 5:37 ` [PATCH v3 4/4] unpack-trees: cheaper index update when walking by cache-tree Nguyễn Thái Ngọc Duy
2018-08-06 15:48 ` [PATCH v3 0/4] Speed up unpack_trees() Junio C Hamano
2018-08-06 15:59 ` Duy Nguyen
2018-08-06 18:59 ` Junio C Hamano
2018-08-08 17:00 ` Ben Peart
2018-08-08 17:46 ` Junio C Hamano
2018-08-08 18:12 ` Junio C Hamano
2018-08-08 18:39 ` Junio C Hamano
2018-08-10 16:53 ` Duy Nguyen
2018-08-12 8:15 ` [PATCH v4 0/5] " Nguyễn Thái Ngọc Duy
2018-08-12 8:15 ` [PATCH v4 1/5] trace.h: support nested performance tracing Nguyễn Thái Ngọc Duy
2018-08-13 18:39 ` Ben Peart
2018-08-12 8:15 ` [PATCH v4 2/5] unpack-trees: add " Nguyễn Thái Ngọc Duy
2018-08-12 10:05 ` Thomas Adam
2018-08-13 18:50 ` Junio C Hamano
2018-08-13 18:44 ` Ben Peart
2018-08-13 19:25 ` Jeff King
2018-08-13 19:36 ` Stefan Beller
2018-08-13 20:11 ` Ben Peart
2018-08-13 19:52 ` Duy Nguyen
2018-08-13 21:47 ` Jeff King
2018-08-13 22:41 ` Junio C Hamano
2018-08-14 18:19 ` Jeff Hostetler
2018-08-14 18:32 ` Duy Nguyen
2018-08-14 18:44 ` Stefan Beller
2018-08-14 18:51 ` Duy Nguyen
2018-08-14 19:54 ` Jeff King
2018-08-14 20:52 ` Junio C Hamano
2018-08-15 16:32 ` Duy Nguyen
2018-08-15 18:28 ` Junio C Hamano
2018-08-14 20:14 ` Jeff Hostetler
2018-08-12 8:15 ` [PATCH v4 3/5] unpack-trees: optimize walking same trees with cache-tree Nguyễn Thái Ngọc Duy
2018-08-13 18:58 ` Ben Peart
2018-08-15 16:38 ` Duy Nguyen
2018-08-12 8:15 ` [PATCH v4 4/5] unpack-trees: reduce malloc in cache-tree walk Nguyễn Thái Ngọc Duy
2018-08-12 8:15 ` [PATCH v4 5/5] unpack-trees: reuse (still valid) cache-tree from src_index Nguyễn Thái Ngọc Duy
2018-08-13 15:48 ` Elijah Newren
2018-08-13 15:57 ` Duy Nguyen
2018-08-13 16:05 ` Ben Peart
2018-08-13 16:25 ` Duy Nguyen
2018-08-13 17:15 ` Ben Peart
2018-08-13 19:01 ` [PATCH v4 0/5] Speed up unpack_trees() Junio C Hamano
2018-08-14 19:19 ` Ben Peart
2018-08-18 14:41 ` Nguyễn Thái Ngọc Duy [this message]
2018-08-18 14:41 ` [PATCH v5 1/7] trace.h: support nested performance tracing Nguyễn Thái Ngọc Duy
2018-08-18 14:41 ` [PATCH v5 2/7] unpack-trees: add " Nguyễn Thái Ngọc Duy
2018-08-18 14:41 ` [PATCH v5 3/7] unpack-trees: optimize walking same trees with cache-tree Nguyễn Thái Ngọc Duy
2018-08-20 12:43 ` Ben Peart
2018-08-18 14:41 ` [PATCH v5 4/7] unpack-trees: reduce malloc in cache-tree walk Nguyễn Thái Ngọc Duy
2018-08-18 14:41 ` [PATCH v5 5/7] unpack-trees: reuse (still valid) cache-tree from src_index Nguyễn Thái Ngọc Duy
2018-08-18 14:41 ` [PATCH v5 6/7] unpack-trees: add missing cache invalidation Nguyễn Thái Ngọc Duy
2018-08-18 14:41 ` [PATCH v5 7/7] cache-tree: verify valid cache-tree in the test suite Nguyễn Thái Ngọc Duy
2018-08-18 21:45 ` Elijah Newren
2018-08-18 22:01 ` [PATCH v5 0/7] Speed up unpack_trees() Elijah Newren
2018-08-19 5:09 ` Duy Nguyen
2018-08-25 12:18 ` [PATCH] Document update for nd/unpack-trees-with-cache-tree Nguyễn Thái Ngọc Duy
2018-08-25 12:31 ` Martin Ågren
2018-08-25 13:02 ` [PATCH v2] " Nguyễn Thái Ngọc Duy
2018-07-27 15:50 ` [PATCH v1 0/3] [RFC] Speeding up checkout (and merge, rebase, etc) Ben Peart
2018-07-26 16:35 ` Duy Nguyen
2018-07-24 5:54 ` Junio C Hamano
2018-07-24 15:13 ` Duy Nguyen
2018-07-24 21:21 ` Jeff King
2018-07-25 16:09 ` Ben Peart
2018-07-24 4:27 ` Jeff King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180818144128.19361-1-pclouds@gmail.com \
--to=pclouds@gmail.com \
--cc=Ben.Peart@microsoft.com \
--cc=git@vger.kernel.org \
--cc=gitster@pobox.com \
--cc=newren@gmail.com \
--cc=peartben@gmail.com \
--cc=peff@peff.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.