From: Jonathan Cameron <jic23@jic23.retrosnub.co.uk>
To: Brian Masney <masneyb@onstation.org>
Cc: robh+dt@kernel.org, mark.rutland@arm.com, andy.gross@linaro.org,
david.brown@linaro.org, linux-iio@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
jonathan@marek.ca, jmaneyrol@invensense.com, knaack.h@gmx.de,
lars@metafoo.de, pmeerw@pmeerw.net, mkelly@xevo.com,
fischerdouglasc@gmail.com, bshah@kde.org, ctatlor97@gmail.com
Subject: Re: [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930
Date: Sat, 18 Aug 2018 18:07:32 +0100 [thread overview]
Message-ID: <20180818180724.2a489d07@archlinux> (raw)
In-Reply-To: <20180803225336.6cb5d581@archlinux>
On Fri, 3 Aug 2018 22:53:36 +0100
Jonathan Cameron <jic23@kernel.org> wrote:
> On Thu, 2 Aug 2018 20:18:58 -0400
> Brian Masney <masneyb@onstation.org> wrote:
>
> > The Avago APDS9930 has the same register set as the TAOS/AMS TSL2772 so
> > this patch adds the correct bindings and the appropriate LUX table
> > values derived from the values in the datasheet. Driver was tested on a
> > LG Nexus 5 (hammerhead) phone.
> >
> > avago,apds9930 datasheet:
> > https://www.mouser.com/datasheet/2/678/avago_AV02-3190EN_DS_APDS-9930_2014-03-25[1]-1217273.pdf
> >
> > tsl2772 datasheet:
> > https://ams.com/eng/content/download/291503/1066377/file/TSL2772_DS000181_2-00.pdf
> >
> > Signed-off-by: Brian Masney <masneyb@onstation.org>
> Glad you noticed they were the same. will apply once precursors are in.
>
Applied to the togreg branch of iio.git and pushed out as testing for the
autobuilders to play with it.
Thanks,
Jonathan
> Thanks,
>
> Jonathan
>
> > ---
> > drivers/iio/light/tsl2772.c | 18 ++++++++++++++++--
> > 1 file changed, 16 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/iio/light/tsl2772.c b/drivers/iio/light/tsl2772.c
> > index 4a11bf77a4d0..83cece921843 100644
> > --- a/drivers/iio/light/tsl2772.c
> > +++ b/drivers/iio/light/tsl2772.c
> > @@ -124,7 +124,8 @@ enum {
> > tsl2672,
> > tmd2672,
> > tsl2772,
> > - tmd2772
> > + tmd2772,
> > + apds9930,
> > };
> >
> > enum {
> > @@ -213,6 +214,12 @@ static const struct tsl2772_lux tmd2x72_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> > { 0, 0 },
> > };
> >
> > +static const struct tsl2772_lux apds9930_lux_table[TSL2772_DEF_LUX_TABLE_SZ] = {
> > + { 52000, 96824 },
> > + { 38792, 67132 },
> > + { 0, 0 },
> > +};
> > +
> > static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = {
> > [tsl2571] = tsl2x71_lux_table,
> > [tsl2671] = tsl2x71_lux_table,
> > @@ -224,6 +231,7 @@ static const struct tsl2772_lux *tsl2772_default_lux_table_group[] = {
> > [tmd2672] = tmd2x72_lux_table,
> > [tsl2772] = tsl2x72_lux_table,
> > [tmd2772] = tmd2x72_lux_table,
> > + [apds9930] = apds9930_lux_table,
> > };
> >
> > static const struct tsl2772_settings tsl2772_default_settings = {
> > @@ -274,6 +282,7 @@ static const int tsl2772_int_time_avail[][6] = {
> > [tmd2672] = { 0, 2730, 0, 2730, 0, 699000 },
> > [tsl2772] = { 0, 2730, 0, 2730, 0, 699000 },
> > [tmd2772] = { 0, 2730, 0, 2730, 0, 699000 },
> > + [apds9930] = { 0, 2730, 0, 2730, 0, 699000 },
> > };
> >
> > static int tsl2772_int_calibscale_avail[] = { 1, 8, 16, 120 };
> > @@ -299,7 +308,8 @@ static const u8 device_channel_config[] = {
> > [tsl2672] = PRX2,
> > [tmd2672] = PRX2,
> > [tsl2772] = ALSPRX2,
> > - [tmd2772] = ALSPRX2
> > + [tmd2772] = ALSPRX2,
> > + [apds9930] = ALSPRX2,
> > };
> >
> > static int tsl2772_read_status(struct tsl2772_chip *chip)
> > @@ -513,6 +523,7 @@ static int tsl2772_get_prox(struct iio_dev *indio_dev)
> > case tmd2672:
> > case tsl2772:
> > case tmd2772:
> > + case apds9930:
> > if (!(ret & TSL2772_STA_PRX_VALID)) {
> > ret = -EINVAL;
> > goto prox_poll_err;
> > @@ -1393,6 +1404,7 @@ static int tsl2772_device_id_verif(int id, int target)
> > case tmd2672:
> > case tsl2772:
> > case tmd2772:
> > + case apds9930:
> > return (id & 0xf0) == SWORDFISH_ID;
> > }
> >
> > @@ -1932,6 +1944,7 @@ static const struct i2c_device_id tsl2772_idtable[] = {
> > { "tmd2672", tmd2672 },
> > { "tsl2772", tsl2772 },
> > { "tmd2772", tmd2772 },
> > + { "apds9930", apds9930},
> > {}
> > };
> >
> > @@ -1948,6 +1961,7 @@ static const struct of_device_id tsl2772_of_match[] = {
> > { .compatible = "amstaos,tmd2672" },
> > { .compatible = "amstaos,tsl2772" },
> > { .compatible = "amstaos,tmd2772" },
> > + { .compatible = "avago,apds9930" },
> > {}
> > };
> > MODULE_DEVICE_TABLE(of, tsl2772_of_match);
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-08-18 17:07 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-03 0:18 [PATCH v3 0/9] treewide: add support for various sensors on the LG Nexus 5 (hammerhead) Brian Masney
2018-08-03 0:18 ` [PATCH v3 1/9] iio: imu: mpu6050: add support for regulator framework Brian Masney
2018-08-03 21:44 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 2/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for mpu6515 Brian Masney
2018-08-03 21:46 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 3/9] iio: tsl2772: add support for reading proximity led settings from device tree Brian Masney
2018-08-18 17:04 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 4/9] dt-bindings: iio: tsl2772: add new bindings Brian Masney
2018-08-03 21:48 ` Jonathan Cameron
2018-08-07 16:54 ` Rob Herring
2018-08-18 17:01 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 5/9] iio: tsl2772: add support for regulator framework Brian Masney
2018-08-03 21:50 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 6/9] dt-bindings: iio: tsl2772: add bindings " Brian Masney
2018-08-03 21:51 ` Jonathan Cameron
2018-08-07 17:20 ` Rob Herring
2018-08-18 17:02 ` Jonathan Cameron
2018-08-03 0:18 ` [PATCH v3 7/9] iio: tsl2772: add support for avago,apds9930 Brian Masney
2018-08-03 21:53 ` Jonathan Cameron
2018-08-18 17:07 ` Jonathan Cameron [this message]
2018-08-03 0:18 ` [PATCH v3 8/9] dt-bindings: iio: tsl2772: add binding " Brian Masney
2018-08-03 21:54 ` Jonathan Cameron
2018-08-07 17:21 ` Rob Herring
2018-08-18 17:06 ` Jonathan Cameron
2018-08-03 0:19 ` [PATCH v3 9/9] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for ALS / proximity Brian Masney
2018-08-18 17:09 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180818180724.2a489d07@archlinux \
--to=jic23@jic23.retrosnub.co.uk \
--cc=andy.gross@linaro.org \
--cc=bshah@kde.org \
--cc=ctatlor97@gmail.com \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=fischerdouglasc@gmail.com \
--cc=jmaneyrol@invensense.com \
--cc=jonathan@marek.ca \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=masneyb@onstation.org \
--cc=mkelly@xevo.com \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.